Reviews Soldering Brazing

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

...rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

READY-TO-GO KIT – Professional Kit with MAPP Gas. This complete kit include a Precision Pencil Flame Torch, Jumbo Flame Head, Flat Burner and Soldering Iron, plus a BLUEFIRE 16.1oz Modern MAPP Gas, 14% More Bonus Fuel, Hotter than Propane! For real, this is one torch for All that meet most users needs..
HEAVY-DUTY – Our torch are made fully by Brass, not those cheaper zinc mix, Better Performance, Thicker and Heavier for durability..
ALL PURPOSE – Fine Pencil head is great for precision welding works, Jumbo Pencil head is sufficient for brazing larger subjects. The Flat Burner or Flame Spreader can produce a consistent and evenly distributed flame, which is very suitable for kitchen baking, and even perfect for searing steaks. And the Soldering Iron is perfect for any soldering jobs..
INTERCHANGEABLE – It is easy to switch heads to meet your needs in different jobs. Just put on the Jumbo Pencil head and attach Flat Burner or Soldering Iron onto it..
POWERFUL – Strong pencil flame to provide both working precision and optimized heat output, Max working temperature up to 1350℃, meets the most common needs for both professionals and DIY fans..

【Propane Mapp Torch】: The heat torch has TUV Certification. Runs off Both Mapp Gas or Propane, Built-In Ignition | Flow Regulator & Flame Lock..
【Easy To Use】: Built In Easy Auto Start / Off Ignition. Easily Ignites and Extinguishes the Flame Quickly..
【3 Torch Tips / Nozzles】: Different nozzles can be replaced according to different requirements..
【Flame Performance】: Adjustable Flame Control Dial Allowing for Desired Flame Size | Flame lock, so you don't have to hold the trigger..
【Multi Purporse】: Suitable for Soldering, Brazing, Heat Treating, Loosening bolts, Light Welding, Stripping Paint, Sous Vide Cooking, Searing....

Engineered for light brazing, soldering, and it is also capable of casting up to three troy ounces of gold or silver.
This system can be used with your choice of fuel: Acetylene, Propane, Hydrogen, Natural Gas, MAPP fuels, & Oxygen.
Includes one torch, size #3-7 curved tips (5 total), 8' hoses, and a complete instruction manual.
Makes a thread-thin flame that will heat up to 6300°F.

Auto start/stop ignition easily ignites and extinguishes flame.
Ultra swirl flame provides maximum heat output for large diameter soldering, brazing, heat treating and light welding.
For best results, use with MAP-Pro fuel, such as the Bernzomatic 14.1 oz. MAP-Pro Hand Torch Cylinder.
Cast aluminum body construction for durability.
Pressure regulated for consistent performance when tilted or momentarily inverted.

Ultra flame provides maximum heat output for large diameter soldering, brazing, heat treating and light welding. Temperature can reach 1650 Celsius Degree.
It is the replacement torch head for our professionalMAPP/Propane Gas Welding Torch.
The continuous working time of cylinder can reach 160 minutes.
Gas suitable: MAPP Gas (designed & suggested), Propane Gas.

Ultra swirl flame provides maximum heat output for large diameter soldering, brazing, heat treating and light welding.
For best results, use with MAP-Pro fuel, such as the Bernzomatic 14.1 oz. MAP-Pro Hand Torch Cylinder.
Adjustable flame control knob to easily size flame for different applications.
Instant on/off trigger igniter with simple one-handed operation(only for some models).
1.5 meters hose EN559 conformity(only for some models).

Complete Kit sell with BLUEFIRE 14.1 oz Standard Propane Gas Cylinder, >93% Purity! Ready-to-Work Kit..
Caution: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Trigger Start Ignition for instant 1-click flame light up, updated version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO, threading fits CGA600 US standard 1lb fuel gas cylinder.
Strong and Stable Triple-point Flame Structure for precision soldering/brazing. Adjustable flame knob for control flame size, solid brass valve constructed for durability.
Suitable for Soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts..