GEVA 30-Pin Bluetooth Transmitter for iPod, No Compatible with The iPod ex Factory Date Before 2007 iPod, iPod Nano, iPod Mini, iPod Touch, iPod Classic(Black)

  • Transmit crystal clear stereo audio signals to any Bluetooth receiving device, such as Bluetooth earphone, Bluetooth speaker or Bluetooth music receiver.
  • Don't have to setup any software, easy to use.No batteries are required, powered by your device. Support profile: A2DP (Advanced Audio Distribution Profile) & ARVCP (Audio/Video Remote Control Profile).
  • ATTENTION: No Compatible with iPod Touch 2nd , iPod Touch 1st. 2nd, iPod Mini (4GB), iPod Touch 2nd, iPad Touch 1st and iPod Classic (30GB). And aslo it don't support the Ipod ex factory date before 2007..
  • It works on Apple products with 30pin plug, compatible with iPod Touch (3rd, 4th), iPod Nano (1st, 2nd, 3rd, 4th, 5th, 6th), iPod Video, iPod Mini, iPod Classic..
  • Customer Service: Due to compatibility issues, the product may not be used with some models of IPOD, nor can it be paired with some Sony and Bose speakers and Bluetooth headsets. In these cases, you can apply to Amazon for an unconditional return or exchange. If you encounter other problems, you can contact customer service via email. We will respond to your email within 24 hours. The product comes with a 30-day warranty..
Check Stock

GEVA 30-Pin Bluetooth Transmitter for iPod, No Compatible with The iPod ex Factory Date Before 2007 iPod, iPod Nano, iPod Mini, iPod Touch, iPod Classic(Black)

  • Transmit crystal clear stereo audio signals to any Bluetooth receiving device, such as Bluetooth earphone, Bluetooth speaker or Bluetooth music receiver.
  • Don't have to setup any software, easy to use.No batteries are required, powered by your device. Support profile: A2DP (Advanced Audio Distribution Profile) & ARVCP (Audio/Video Remote Control Profile).
  • ATTENTION: No Compatible with iPod Touch 2nd , iPod Touch 1st. 2nd, iPod Mini (4GB), iPod Touch 2nd, iPad Touch 1st and iPod Classic (30GB). And aslo it don't support the Ipod ex factory date before 2007..
  • It works on Apple products with 30pin plug, compatible with iPod Touch (3rd, 4th), iPod Nano (1st, 2nd, 3rd, 4th, 5th, 6th), iPod Video, iPod Mini, iPod Classic..
  • Customer Service: Due to compatibility issues, the product may not be used with some models of IPOD, nor can it be paired with some Sony and Bose speakers and Bluetooth headsets. In these cases, you can apply to Amazon for an unconditional return or exchange. If you encounter other problems, you can contact customer service via email. We will respond to your email within 24 hours. The product comes with a 30-day warranty..
Check Stock

CURT 17499 TruTrack 4P Weight Distribution Hitch with 4x Sway Control, Up to 8K, 2-Inch Shank

  • ACTIVE SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also actively resists trailer sway. It uses a spring and cam system and fixed support brackets to stop trailer sway at four distinct points for a smoother, safer ride.
  • PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful 35-9/16-inch trunnion spring bars and an adjustable shank that fits a 2-inch receiver.
  • EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features a tilting head with hex castle nuts for easy adjustment without completely disassembling the hitch.
  • HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a welded head and cast steel pieces. This stabilizer hitch is rated for 5,000 to 8,000 lbs. GTW and 500 to 800 lbs. TW.
  • CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements.
Check Stock

CURT 17601 TruTrack 2P Weight Distribution Hitch with 2X Sway Control, Up to 10K, 2-in Shank, 2-5/16-Inch Ball

  • INTEGRATED SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also reduces trailer sway. It uses fixed support brackets to resist trailer sway at two distinct points for a smoother, safer ride.
  • PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful, round spring bars and a highly adjustable, 7-hole shank that fits a 2-inch receiver.
  • EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features a tilting head for easy adjustment without completely disassembling the hitch.
  • HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a fabricated head. This stabilizer hitch is rated for 8,000 to 10,000 lbs. GTW and 800 to 1,000 lbs. TW.
  • CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements.
Check Stock

UHF 5 Way Active Antenna Power Distribution System for shure Sennheiser Wireless Microphone Compatible Shure Antenna Paddle

  • UHF 450-970MHZ Antenna splitter for Wireless Microphone System and shure Antenna Paddle.
  • The product is a UHF antenna distribution system that can expand the signals of the wireless microphone system by splitting one pair of the antennas to wireless receiver.It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs.And can supply the power port to the UHF wireless system..
  • Antenna distribution system is used for large UHF wireless system,four wireless receivers can use two same antennas for every unit.Cascade port can receive the 5th receiver or the 2nd antenna distribution system..
  • Antenna Distribution System Compatible with Sennheiser Shure AKG UHF Wireless Microphone,Your wireless microphone frequency range must be between 450-970MHz.
  • Two 50ΩBNC antenna cascade port can extra connect one antenna distribution system or the fifth wireless receiver.The large wireless system can work by 1 pair antenna..
  • Note: This antenna splitter need to be used with antenna paddle,antenna amplifier using Method,You can see the connection picture below, If you don't have antenna paddle, you can buy it in this store.
Check Stock

Ideashop Bonnet Hood Hair Dryer Attachment with Deep Conditioning Heat Cap, Adjustable Bonnet Hair Dryer with Hose for Drying, Styling, Curling, Flaxseed Heat Cap for Hair Repair Steam Care Therapy

  • 2019 LATEST UPGRADE DESIGN - Larger hood capacity to hold almost any hairstyle including hair curlers and rollers. Upgrade flexible hose is ideal for multitasking. Bigger hose collar with velcro strap to fit any size hand held dryer holes for faster and more even heat distribution. It cuts deep conditioning time down dramatically.
  • HEAT DISTRIBUTION - Our bonnet dryer attachment is made with strategically placed holes to maximize heat distribution, drying your hair evenly and efficiently. With less effort while providing maximum heat distribution from follicles to hair ends.
  • SOFT, ADJUSTABLE FIT - The adjustable side-located drawstring and the chin strap to ensure the hair heating cap does not come off during use,Consistent and strategically place hole opening for Even, Robust airflow and distribution making the hat more suitable for everyone / Ventilation holes for faster and more even heat distribution.
  • THE DEEPEST CONDITIONING - Convert your hair dryer into a professional hair drying system. Great for hair setting with rollers, deep conditioning, hot oils and heat treatments. It is the perfect accessory to use with your conditioner, castor oil, curlformers, rollers and velcros.
  • SAVE TIME AND EFFORT - These versatile hair-dryer bags slide over your head....
Check Stock

CURT 17500 TruTrack Weight Distribution Hitch with Sway Control, Up to 10K, 2-In Shank, 2-5/16-Inch Ball, Black

  • ACTIVE SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also actively resists trailer sway. It uses a spring and cam system and fixed support brackets to stop trailer sway at four distinct points for a smoother, safer ride.
  • PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful 35-9/16-inch trunnion spring bars and an adjustable shank that fits a 2-inch receiver.
  • EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features a tilting head with hex castle nuts for easy adjustment without completely disassembling the hitch.
  • HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a welded head and cast steel pieces. This stabilizer hitch is rated for 8,000 to 10,000 lbs. GTW and 800 to 1,000 lbs. TW.
  • CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements.
Check Stock

CURT 17501 TruTrack 4P Weight Distribution Hitch with 4X Sway Control, Up to 15K, 2-in Shank, 2-5/16-Inch Ball , Black

  • ACTIVE SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also actively resists trailer sway. It uses a spring and cam system and fixed support brackets to stop trailer sway at four distinct points for a smoother, safer ride.
  • PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful 35-9/16-inch trunnion spring bars and an adjustable shank that fits a 2-inch receiver.
  • EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features hex castle nuts for easy adjustment without completely disassembling the hitch.
  • HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a welded head and cast steel pieces. This stabilizer hitch is rated for 10,000 to 15,000 lbs. GTW and 1,000 to 1,500 lbs. TW.
  • CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements.
Check Stock

The Normal Probability Distribution [Download]

  • Understand the fundamental concepts and methods of the Normal Probability Distribution..
  • Approach the Normal Probability Distribution topic through real-world examples utilizing data and events..
  • Understand the Normal Probability Distribution and the Normal (Bell) Curve, including calculating probabilities. Also, we will discuss the methods for....
Check Stock