Reviews Socket Boxe

ABN Axle Nut Socket, 35mm, 1/2in Drive, 6 Point – Universal for All Vehicle 6pt Installation, Removal, Repair

  • [Perform Maintenance with Ease]: When it comes to removing, installing, and repairing hub or axle nuts on your vehicles, depend on the ABN Axle Nut Socket Set.
  • Impact axle nut socket set includes 1 35mm axle socket nut.
  • [Built to Last]: No need to worry about this large axle nut socket set 1-pack cracking under the pressure.
  • Axle impact socket set is constructed from chromium-molybdenum steel (CR-MO) for strength and longevity.
  • [For Your Tools]: Use this axle nut impact socket set 1-pack with your ratchet, breaker bar, impact wrench, or torque wrench.
  • Spindle axle nut socket set will fit standard 1/2-inch socket wrench drives.
  • [Output Shaft Length]: Output shaft of this front axle socket set axle nut kit 1-pack has a 1/2-inch deep socket drive.
  • Fit this wheel bearing socket set 1-pack into various axle lengths for your trucks, sedans, cars, motorcycles, and more.
  • [Fit For Your Vehicle]: Axle hub socket set 1-pack will fit most 4-wheel drive and front wheel drive automobiles.
  • Wheel bearing locknut socket set is compatible with vehicles such as GM X, J and A body style cars, Dodge Neon, Chevrolet Cobalt.
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

6PCS Socket Organizer Tray Set, Red SAE & Black Metric Socket Storage Trays, 1/4-Inch, 3/8-Inch & 1/2-Inch Drive Deep and Shadow Socket Holders for Toolboxes

  • ELIMINATE TOOLBOX CLUTTER & SAVE TIME – This complete socket trays set is designed for eliminating your toolbox cutter and keeping it organized. Make it convenient for you to find the dedicated socket instantly.
  • TOOL BOX SOCKET ORGANIZER: Store and organize 1/4”, 3/8”, and 1/2” drive sockets.
  • These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets.
  • Sockets organizer stores shallow and deep-well sockets.
  • LONG-LASTING SOCKET STORAGE: This lightweight socket organizer for toolboxes is made of a rugged ABS plastic that is strong enough to endure a lifetime of use.
  • Durable socket organizer tray for toolbox storage is designed with professionals in mind.
  • ORGANIZED WORKSPACE: Toolbox organizer tray posts are clearly labeled with measurements for easy identification.
  • Never misplace another socket with this labeled socket organizer.
  • Our plastic socket holder cleans up cluttered tool boxes and workspaces.
  • COMPREHENSIVE SAE AND METRIC SOCKET HOLDER SET: 1/8” - 5/8”, 4mm - 15mm (1/4" drive socket organizers).
  • 1/4” - 1”, 6mm - 20mm (3/8 socket organizer).
Check Stock

Scythe Mugen 5 CPU Cooler with Sealed Precision FDB Kaze Flex 120mm PWM Fan (SCMG-5100)

  • Technical Data: Model: Mugen 5 TUF Gaming Alliance Model Number: SCMG-5100TUF Ean Code: 4571225057088 Compatibility: Intel : Socket LGA775 Socket LGA1366 Socket LGA115x Socket LGA2011-v3 Socket LGA2066 AMD : Socket AM2+ Socket AM2+ Socket 3+ Socket AM4 FM1 Socket FM2+ Dimensions: 136 x 110.5 x 157.5 mm (fan included) Width, Depth, Height Weight: 950 g (with fan installed) Fan Specifications Kaze Flex 120 RGB PWM: Measurements: 120 x 120 x 27 mm Noise: from 4 .0 to 2 4.9 dBA Air flow: 16.6 to 51.17 CFM Rotation speed: 300 (±200 rpm) to 1,200 rpm (±10%) Power supply: 12V Accessories: Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.
Check Stock

3 Prong Light Socket Adapter, E26 Light Bulb Outlet Adapter, Polarized Light Socket to Plug Adapter, White Light Bulb to 2/3 Prong Outlet Plug Splitter Converter for Garage Porch CCTV Camera (1 Piece)

  • 3 Prong Design Light Socket to Plug Adapter: the light socket adapter is 3 prong socket design, 3 prong socket can be applied in both 3 plug and 2 plug, a wider range of applications.
  • Additional 2 Socket Outlets: the light socket adapter splits your standard socket to 2 polarized outlet and 1 bulb socket for your convenience, good for garage, workshop, basement, porch, patio, Halloween Christmas Outdoor Lights, security cameras.
  • Electrical Ratings: E26/E27 socket outlet adapter voltage range: 0-125VAC, wattage: 1250W.
  • This light bulb adapter is not suitable for use in wet locations.
  • Stable Material: the light bulb socket adapters are made of flame retardant PBT material, heat resistant and long lasting, this light socket plug attached with US standard.
  • Easy to Install: you just need to turn off the fixture, remove the existing bulb, and screw the light socket plug adapter into the light socket.
Check Stock

2 Pack 3 Prong Light Socket Adapter, E26 Light Bulb Outlet Adapter, Polarized Light Socket to Plug Adapter, White Light Bulb to 2/3 Prong Outlet Plug Splitter Converter for Garage Porch CCTV Camera

  • 3 Prong Design Light Socket to Plug Adapter: the light socket adapter is 3 prong socket design, 3 prong socket can be applied in both 3 plug and 2 plug, a wider range of applications.
  • Additional 2 Socket Outlets: the light socket adapter splits your standard socket to 2 polarized outlet and 1 bulb socket for your convenience, good for garage, workshop, basement, porch, patio, Halloween Christmas Outdoor Lights, security cameras.
  • Electrical Ratings: E26/E27 socket outlet adapter voltage range: 0-125VAC, wattage: 1250W.
  • This light bulb adapter is not suitable for use in wet locations.
  • Stable Material: the light bulb socket adapters are made of flame retardant PBT material, heat resistant and long lasting, this light socket plug attached with US standard.
  • Easy to Install: you just need to turn off the fixture, remove the existing bulb, and screw the light socket plug adapter into the light socket.
Check Stock

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

  • MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
  • Quickly identify the right tool every time with this tool socket organizer.
  • Additional 1/2 inch socket organizer tray to accommodate any socket collection.
  • FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
  • Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
  • Anodized black finish creates a sleek toolbox appearance.
  • NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
  • The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
  • Our socket set organizer is designed to meet your needs.
  • INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
  • Subtle socket set tray organizer design means they fit easily in any storage drawer.
  • TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
  • (2) 1/2” socket holders organizers for tool box measure 12” x 3”.
  • The socket organizer for tool box drawer has adjustable studs.
Check Stock

NEIKO 02486A Impact Universal Joint-Socket Swivel Set, Socket Extension Set Made From Cr-Mo with Included 1/4-, 3/8-, and 1/2-Inch Sockets, Set of 3

  • SOCKET WRENCH SET: This 3-pack impact socket adapter joint set is made with heat-treated black chromium-molybdenum steel for maximum durability. It includes one 1/4-inch, 1/2-inch, and 3/8-inch extension socket that fits as a drill socket adapter..
  • QUALITY UNIVERSAL SOCKET: Our socket adapter set has a protective high-quality black phosphate coating to provide long-term protection from dirt, grime, and other corrosion. This swivel socket set works well for lifetime impact and hand tools..
  • ANGLE SOCKET ADAPTER: Each socket in this 3 pack has a full 360-degree bendable joint that lets you access hard-to-reach angles. The U-joint mechanism has a rotatable design that gives you more coverage with your drilling jobs..
  • EASY-ATTACHMENT DESIGN: To attach the socket drill extension, snap the end of the adapter onto your drill. Each extender has a spring-loaded ball at the attachment point that locks the socket securely into place to prevent slipping and dropping..
  • VISIBLE SIZES: The 1/4-inch, 3/8-inch, and 1/2-inch socket adapters have their sizes laser-etched into the sides. These easy-to-....
Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

  • STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
  • This socket set organizer accepts both shallow and deep sockets.
  • USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
  • 1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
  • SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
  • BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
  • Socket clips constructed from heavy-duty plastic.
  • End caps constructed from soft plastic (caps removable).
  • Set holds up to 48 sockets (16 sockets per rail).
  • SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
  • Your sockets attach to plastic clips which are friction fit to the aluminum rail.
  • The clips are held in place by soft plastic end caps that are also friction fit to the rail.
Check Stock