Reviews Snowmobile Trailer Light Kit

CZC AUTO 12V Submersible LED Trailer Tail Light Kit for Under 80 Inch Trailer Boat utility Trailer Waterproof (Trailer light kit)

  • Left and Right trailer tail Lights have 7 functions : stop/turn/tail/rear reflector/side reflector/side marker light/ license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat,utility trailer, truck, snowmobile, etc..
  • 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime! The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
  • Excellent Waterproof/Submersible Lights for Boat Trailer. Sonic Welding Sealing Technology ensures sealing solidity of the tail lights. Every possible gap is sealed well with marine grade glue, such as wire's entrance holes and edge of the lens.
  • Easy to install the submersible trailer lights. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram ships with trailer lights, you can also find it on instruction sheet.
  • CZC AUTO, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PLEASE NOTE: Any problem in using our submersible trailer tail lights,....
Check Stock

CZC AUTO 12V LED Submersible Left and Right Trailer Lights Stop Tail Turn Signal Lights for Under 80 Inch Boat Trailer Truck RV Marine-Replacement for Your Incandescent Bulb Units

  • ...railer Lights: Left and Right LED trailer tail Lights have 6 functions in common: Stop/Turn/Tail/Rear reflector/side reflector/side marker light. 1 additional function for left trailer light: license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat, trailer, truck, snowmobile, etc..
  • All diodes are LED, NOT incandescent bulbs: 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime. The waterproof trailer tail lights comply with DOT standards which is tested by US lab.
  • Excellent Waterproof/Submersible Lights for Trailer: Sonic Welding Whole Sealing Technology ensures sealing solidity of the LED tail lights. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens. 18 gauge pure copper wires ensure trailer lights LED do good job underwater.
  • Easy to Install: 2 optional mounting ways - mounting on the back or the side of the trailer. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram comes with trailer lights, you can also find it in detail page.
  • CZC AUTO, a reliable brand in trailer lights industry, we offer 30-d....
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Aootf Trailer License Plate Bracket Holder- Truck/RVs/Boats Aluminum Car Tag Frame and Black Silicone Cover, Universal License Plate Light Mounting Kit with Stainless Steel Screw Cap…

  • Trailer Truck License Plate Holder- Aluminum license plate bracket is designed for replacing your plastic license plate holder, heavy-duty, prevent damage and loss of your Truck/Trailer/RV license plate, make the license plate light bracket last longer. This product was specifically designed for Boat, PWC, Snowmobile, ATV, Utility trailers and RVs.
  • For Universal Truck License Plate- Sturdy thickness Aluminium to keep strong and No bending easily, ensure no rusting and longer years lifetime. The installation size for the bracket is from 1-5/8" to 2-1/2", and the installation size for the license plate is from 4" to 8-5/8", suitable for license plate locks of various models, such as trucks, trailers, motorcycles, etc..
  • Silicone License Plate Frame- The black rustproof / rattleproof car tag frame uses industrial-grade silicone material, durable, soft and tough, can withstand extremely high and low temperatures. The flexible material protects your vehicle from license plate rattle and scratching . 5 drainage holes are designed on the bottom of the silicone plate frame, to release rain and dust.
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

JHR-AUTO Trailer License Plate Bracket- Truck/RVs/Boats/Jet Ski Rubber Car Tag Holder and Black Silicone Frame, Universal Adjustable License Plate Mounting Kit with Stainless Steel Screw Cap

  • ...cense plate mounting kit is designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, soft and tough, heavy-duty, prevent damage and loss of your Truck/Trailer/RV license plate, make the license plate light bracket last longer. This product was specifically designed for Boat, PWC, Snowmobile, ATV, Utility trailers and RVs.
  • RUBBER LICENSE PLATE BRACKET- This product is made from premium tough, high tensile, multiply fabric reinforced thick neoprene rubber, Replaces flimsy plastic, rigid steel and aluminum holders. Flexible, durable, corrosion-proof, tear-proof, fatigue-proof, cold temperatures, good UV resistance and long-lasting.
  • SILICONE LICENSE PLATE FRAME- The black rustproof / rattleproof car tag frame uses industrial-grade silicone material, Heavy-duty, durable, soft and tough, can withstand extremely high and low temperatures. The flexible material protects your vehicle from license plate rattle and scratching. 5 drainage holes are designed on the bottom of the silicone plate frame, to release rain and dust.
  • EASY TO INSTALL- The slim frame is suitable for all 12 x 6 inch standard plates in the United States/Canada. Thin edge design, Will not cover the registration sticker on the metal license plate, and guar....
Check Stock

samman Trailer License Plate Light Bracket Universal Aluminum License Plate Holder for Most Trailer and Truck, blue

  • FITMENT: this license plate light bracket fits most truck and trailer, motorcycle, boat, snowmobile, It also compatible With most license plate and box-style lamps..
  • - BUILT TO LONG LAST: Trailer license plate mount bracket made of sturdy aluminum alloy, which is durable and rust-resistance, corrosion resistance, it is a much better idea than the plastic options,work out very well for marine environments even in salt.
  • - EASY TO INSTALL: The old license plate bracket and rear lamp should be removed before installation. First of all, peel off the blue film of your new bracket.
  • Secondly, fixed your lamp and new bracket to the screw hole position of the trailer and tighen.
  • EXCELLENT WORKMANSHIP: the trailer license plate holder has diamond pattern on the polished surface, come With a blue scratch-proof film, which can effectively prevent the plate rack from being scratched in transit..
Check Stock

BJZ 3/4'' LED Trailer Marker Clearance Lights Green Round 12V LED Side Marker Front Rear Stop Turn Signal Tail Indicator Light Waterproof for Trailer Truck ATV UTV RV Van Pickup, 10Pcs w/ Clear Lens

  • ✔【Parameters】Pack of 10 12V Green Side Marker Lights, IP68 fully sealed waterproof.
  • Configuration includes transparent lens, rubber grommets and built-in 3LED chips.
  • ✔【Wide Application】Round LED trailer lights fit for led marker light, clearance light, side marker light, trailer marker light, identification light, tail light, stop light, brake light, stop turn signal light, running light, warning light, decorative light, bumper light and more..
  • ✔【Universal Fit】Widely used for car, truck, trailer, golf cart, pickup, motorcycle, bus, ATV, UTV, RV, RZR, SUV, van, caravan, snowmobile, boat, lorry, F350, F450, etc..
  • ✔【High Brightness】Each red marker light has 3 high-power LED chips, outputs 60LM high-brightness light and improves driving safety. 50,000 working hours, low power consumption, very energy saving..
  • ✔【High Quality】Round clearance light is made of reinforced PC lens and rubber grommet. Sturdy clear Lens will not fade after prolonged exposure to the sun. IP68 waterproof can also work effectively when immersed in water. Rubber grommet greatly reduces the friction between the lens and the car..
Check Stock

attwood 14060-7 Submersible Multi-Function LED Trailer Light Kit,Silver, One Size

  • Complete kit designed for trailers under 80 inches wide to outfit your trailer with safety lights.
  • Includes: (2) 8-function stop, tail, turn lights, (1) license plate bracket, (1) wiring harness.
  • Ideal for snowmobile, camping, motorcycle, boat, and utility trailers.
  • Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock