Reviews Snowmobile Hood Latch Kit

YMHHefy Blue Quick Latch Hood Pins 2.44\ Diameter Universal Quick Release Latch Push Button Quick Release Hood Bonnet Pins Lock Clip Kit for Hood Bumper or DIY 2Pcs

  • ...ke even when drifting or turning, and it will lock the hood firmly when driving on the road or being hit by others. It must be drilled to properly install it on the hood..
  • [ FEATURES ] - Made of high-quality aluminum and stainless steel, not easy to corrode and very durable. Very suitable for car hood, quick release latch suitable for all vehicles. It can be widely used in furniture, cabinets, or any other purpose you can imagine..
  • [ PREMIUM QUALITY ] - Each quick release device will be 100% tested before leaving the factory to ensure product quality and ensure that the latch button works smoothly without hindering the feel..
  • [ INSTALLATION ] - Screw the nut and washer into the screw, put it in the hole of the engine cover, and fix the screw. Apply a little black grease to the top of the screws, close the hood, and press the hood lightly. After opening it, you can see a black dot printed on the screw cover, piercing the black dot. During the punching process, place the button cover on the hole and observe whether the size is appropriate..
  • [ GUARANTEE ] - If the quick release latch has any quality or other problems, please feel free to contact us, we try our best to provide you with a satisfactory solution within 24 hours..
Check Stock

Brand New Latch Replacement Set Kit for Mailbox Repair - Top Latch, Door Latch, 2 Latch Clips, Compatible with Group Standard Mailboxes - Easy to Install No Additional Mounting Hardware Needed

  • LATCH SET KIT FOR MAILBOX REPAIR - Tired of your mailbox door always falling open? Or are you searching for a non-rusting and waterproof mailbox latch? Our latch set kit is what you are looking for. Made from polypropylene (PP), a type of plastic commonly used in the manufacture of living hinges and other non-load-bearing applications. PP plastics are highly durable and can bend repeatedly without breaking. It is also chemical resistant, high toughness, fatigue resistance, and more..
  • TOP LATCH, DOOR LATCH, AND 2 LATCH CLIPS - This simple latch mechanism is composed of 4 components. The top latch and door latch come with interchangeable latch clips. Each latch has posts that fit in mounting holes that measure 7/8 inches from center to center. If your mailbox has mounting holes that are farther apart, the latches may not clip on or even fit properly..
  • COMPATIBLE WITH SOLAR GROUP STANDARD MAILBOXES - This latch kit will provide a snug fit, tightly securing your standard-sized metal mailboxes. It is suitable for use with existing latch holes (2 holes for the door latch and 2 holes for the top latch) on standard-sized metal mailboxes. Please note that you need to use the entire kit since the plastic latches won’t work with metal hardware..
Check Stock

Brand New Latch Replacement Set Kit for Mailbox Repair - Top Latch, Door Latch, 2 Latch Clips for Solar Group Standard Mailboxes - Easy to Install No Additional Mounting Hardware Needed

  • LATCH SET KIT FOR MAILBOX REPAIR - Tired of your mailbox door always falling open? Or are you searching for a non-rusting and waterproof mailbox latch? Our latch set kit is what you are looking for. Made from polypropylene (PP), a type of plastic commonly used in the manufacture of living hinges and other non-load-bearing applications. PP plastics are highly durable and can bend repeatedly without breaking. It is also chemical resistant, high toughness, fatigue resistance, and more..
  • TOP LATCH, DOOR LATCH, AND 2 LATCH CLIPS - This simple latch mechanism is composed of 4 components. The top latch and door latch come with interchangeable latch clips. Each latch has posts that fit in mounting holes that measure 7/8 inches from center to center. If your mailbox has mounting holes that are farther apart, the latches may not clip on or even fit properly..
  • COMPATIBLE WITH SOLAR GROUP STANDARD MAILBOXES - This latch kit will provide a snug fit, tightly securing your Solar Group standard mailbox or any standard-sized metal mailboxes. It is suitable for use with existing latch holes (2 holes for the door latch and 2 holes for the top latch) on standard-sized metal mailboxes. Please note that you need to use the entire kit since the plastic latches won’t work w....
Check Stock

10th Anniversary Hood Replacement Hood Heat Dispersion for 2007-2017 Jeep Wrangler JK JKU

  • Replacement Hood Latch Set of 2 - Includes both left and right hood hold-down catch for your Jeep Wrangler TJ. If your existing hood latches are all worn out and faded, it can be dangerous as the elasticity of your old hood latch will wear and will no longer secure the hood tightly to the fenders over time. This can result into fluttering at higher speeds and worse become unlatched..
  • Fits The Following Vehicles - 1997-2006 Jeep Wrangler | Replacing the new latches manufactured by AA Ignition is an inexpensive insurance of preventing the hood from unlatching. Installtion is easy and does not require any special tools at all. Fits popular Jeep Wrangler TJ models from years 97, 98, 99, 00, 01, 02, 03, 04, 05, 06..
  • Replaces Part# 55176636AD, 68038118AA, Dorman 42422 Found on the popular Wrangler TJ models. This is a direct replacement for your factory hood latches and it fits popular Wrangler TJ models with years 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006..
  • OEM Fit, Quality, Finish - This pair of hood latches features a redesigned construction to insure it will last longer than the factory part. While this is not a genuine Jeep or Dorman part, it is a direct replacement and it will appear, fit and work like the factory part..
Check Stock

Hood Strap Panel Latch Kit 517302448 Fits For Ski Doo Rev Mxz Gsx Gtx Four Straps

  • fit for SKI DOO REV MXZ GSX GTX Summit and etc. Replace 517302448 / 12-1886..
  • Strong ability to withstand wear, stretch resistance, stronger locking force ensures safe driving..
  • service please contact us at any time with your concerns..
Check Stock

Creatyi 6 PCS Rubber Flexible Hasp T-Handle Draw Latches

  • Package included: 6 PCS rubber flexible draw latches with brackets..
  • T-Handle Latch body made of high quality elastomer to reduce vibration ,apply prepressing.
  • Great for hoods,vehicle engine hood,machine hood,oscillatory machine,battery boxes and compartment doors..
  • Latch is designed for either vertical or horizontal mounting..
  • Material: Flexible Rubber, Nylon and Premium high quality SPCC.
Check Stock

KEMIMOTO Heated Snowmobile Gloves Water-Resistant ATV Handlebar Muffs Extra Wide Snowmobile Mittens Heated Gauntlets Motorcycle Hand Warmers for Men, Adapt to 12V Power

  • WATER, WIND AND WEAR RESISTANT ATV & SNOWMOBILE MUFFS. Made with tough 1680D fabric, these muffs are the perfect partner for any winter ATV, snowmobile or motorcycle adventure. If you want your hands to stay warm, dry and comfortable in wet, cold conditions then add this gear to your snowmobile accessories kit..
  • KEEP YOUR HANDS WARM. These handlebar mitts will keep you warm in the fall and winter even if the weather drops to -4°F (-20°C). The soft, fluffy inner lining makes you feel like you’re wearing heated warmers. And they’re comfortable up to 78°F (26°C) too..
  • EXTRA WIDE DESIGN MADE FOR SAFER & WARMER RIDING. These ATV handguards are designed not to interfere with your riding controls. And, you can use them with your puffiest winter gloves on. Added bonus: you can keep your phone on hand in the transparent, waterproof and touchscreen enabled PVC pocket on the right hand side..
  • EVA FOAM PADDING FOR SUPERIOR PROTECTION. Plastic trim and EVA foam give these ATV gauntlets enough shape to stand on their own without stiffening. This minimizes interference with your controls and ups the comfort level..
  • MIRROR HOLES FOR ADDED SAFETY. The snowmobile handlebar mitts slide over the mirrors without blocking them or your instrument cluster. Use them to k....
Check Stock

New Plastic Latch Set Kit for Solar Group Standard Mailbox Repair Latch Kit (1, Red)

  • Brand New Mailbox Plastic Latch Set Kit for Standard Mailbox.
  • A snug tight fit, keeps your mailbox door up and secure ~ No more doors falling open ~ Easy Installation, no tools required ~ No Mounting Hardware Needed.
  • Please verify measurements provided to ensure fitment before ordering - Measures Approximately: Top Latch: Length: 3-1/8" ~ Width: 7/8" ~ Posts (Center to Center):7/8" apart / Door Latch: Length: 2" ~ Width: 7/8" ~ Posts (Center to Center):7/8" apart / Latch Clips: Length:1-7/16" ~ Width: 3/4" ~ Holes (Center to Center): 7/8" apart.
  • Color: Red ~ Quantity: 1 kit ~ Each Kit Includes: 1 - Finger Handle / 1 - Latch / 2 - Mounting Brackets ~ Will not work with a metal latch.
  • Fits most metal mailboxes (Must have 2 holes for door latch and top latch) ~ The latch posts on door and top measure approximately 7/8" apart on center to center ~ Please see Measurements provided for fitment of your mailbox..
Check Stock

BLACKSTRAP Hood Balaclava Face Mask, Dual Layer Cold Weather Headwear for Men and Women (Drab)

  • The Hood Balaclava Facemask sets the industry standard in performance,  comfort, and protection from the elements. Skiers, snowboarders and snowmobile riders have made The Hood their go to balaclava since 2008 thanks to its ergonomic design, patented Exo-Hinge construction, seamless helmet compatibility and the USA milled, 4-way stretch fabric that is moisture wicking. The Hood Balaclava is UPF 50+ (UV) rated for sun protection..
  • MADE IN THE USA: Patented Tri-Blend Fabric (Milled in the USA).
  • One size fits most adults (Available in KIDS).
  • Single layer head & neck for a helmet friendly ergonomic fit, Wind rated dual layer Exo-Hinge neck and face.
  • Synthetic, breathable moisture wicking & lens safe fabric that is quick drying and machine washer/dryer friendly.
Check Stock