Reviews Snap in Electrolytic Capacitor Cap

East Tester ET430 ET431 ET432 ET433 Multifunction Handheld Digital LCR Meter Portable Capacitance Tester High Precision Capacitance Inductance Resistance Meter (ET432)

Measurable frequency up to 100k Hz, continuously adjustable at a step of 1 Hz..
Measurement of DC resistance and electrolytic capacitor supported.
Internal bias voltage output (10 mV-500 mV).
Automatic identification of measured component.
Support for screening and deviation measurement.
2.8” TFT display screen, a 4 1/2 digit display.
Power supply by high capacity lithium battery.
System configuration available for setting of language, buzzer and display brightness.
Basic measuring accuracy 0.2%, adjustable measuring speed.

AUCHOICE 40+5 uF ±6% 370/440 VAC CBB65 dual run start AC capacitor can replaces BOTH 370 & 440 VAC Volt capacitors..
Capacitor size measures 2 inch in Diameter x 5 inch in Height..
Operating temperature: -40℃ to +70℃/-104℉ to +158℉. Frequency: 50/60 Hz. Safety rated: 10,000 AFC - Available Fault Current..
Capacitor Replacement for 97F9838 , Z97F938 , 97F9838BZ3 , 12786 , RC0108 , 97F9849 , C3DR405 , Z97F9848BZ2 , P291-4054RS , C3405R , HCKS400D050R440Z , P291-4053RS , TT-CAP-40/5/440R , TRCFD405 , TP-CAP-40/5/440R , HC98JA041 , HC98CA040 , HC98CA041 , HC93CZ035..
SUPER EASY to Replace: Direct replacement, no need to change wiring or adapter. Capacitor has three terminals on the top are labeled "Herm" for the compressor motor, "Fan" for the fan, and "C" for the common line..

[Wide Application]: It is very easy to test plug-in and SMD devices, it can also be used to test different kinds of triodes, thyristors, MOSFET,....
[Automatical Identification]: Smart transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors,....
[2 POWER/TEST Button]: POWER/TEST button on both sides, you can operate it with your left or right hand..
[Typical ESR Value Table]: There is a table "typical ESR value of electrolytic capacitor" at the back, provide a clear indication that you can quickly....
[Added Functions]: The transistor tester will be auto power off to save energy if there is no any operation within about 10 seconds. Large LCD display....

* Smooth Control-- The singlechip microcomputer adopts an independent voltage regulator chip, which avoids the power interference caused by the BEC load change and improves the working stability..
* High Efficiency-- The output MOSFET power tube is equipped with an independent heat sink to reduce the temperature rise of the device and improve the high current working capability of the system..
* Good Antiinterference-- The power input terminal adopts ultralow impedance and largecapacity electrolytic capacitor, which improves the antiinterference ability..
* 30A Current Operation-- Made of high quality electronic components, dependable to use. Features 30A continuous current and 40A peak current..
* Applicable for-- Practical accessory for RC remote control drone, helicopter and FPV, etc. Easy to install, no complicated operations required..

【Updated Version】:110V STC-1000 Pro, Replace STC-1000. Using better relay module: HF3FF-012-01H.
【Function】: Automatically switch the modes between cooling iand heating, keeping the devices at desired temperature. Please note: there is no....
【Safety & Quality】: The fireproof ABS case, the large LCD screen display and the three-button design make it safer to use and easier to read and....
【Alarm for Safe】: Refrigerating control output delay protection, Dual heating and cooling function, Alarm when temperature exceeds the limit or....
【Wide Range of Uses】: Can be Used for for Fermentation Hatch, Domestic Freezer, Water Tanks, Refrigerator, Aquarium, Homebrewing Beer,....

MODEL NUMBER - CBB65 Run Motor Capacitor.
Capacitor dimensions: 31.5mm x 51.5mm x 80mm.
Operating temperature range: -25℃ to 70℃/ -13℉ to 158℉.
REPLACeMENT FOR - 97F9002, 97F9002s, 97F9002BZ3, Z97F9002, 27L669, HC91CA010D, HC91CA010, HC90AB010, HC96AC010, TOCF10, CR10x370, TT-CAP-10/440, TP-CAP-10/440, HCKS100V440Z.
PREMIUM QUALITY - The replacement part is made from durable high-quality aluminum and well-tested by the manufacturer - Meets OEM standards - Ensures long-lasting and effective performance. This capacitor will provide your electric motors with an outstanding electrical characteristic of high capacitance stability over time and temperature, and very low internal power loss.
% : Customer satisfaction is our priority. If for any reason you're not completely satisfied, we will compensate you and offer extra benefits to ensure your rights. Buy with confidence!.

5uf / 5MFD 370 Volt or 440 Volt Capacitor. Replaces BOTH 370VAC & 440VAC capacitors.
OVAL motor run capacitor. Can size measures 2" Wide , 2.5" Tall and 1.25 " thick. Operating temperature range -40 C. to +70 C/ -40F to 158F.
Replacement for: TOCF5 , CPT00072 , 97F5705, Z97F5705 , 97F95702 , Z97F5702 , TT-CAP-5/440 , C305L ,PW-5, TP-CAP-5/440.
Built to the toughest USA standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.