Reviews Small Insert Tool

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...tric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

Cooler Kitchen Extra Large Rotating Stainless Steel Utensil Holder Caddy with Sturdy No-Tip Weighted Base Removable Divider and Gripped Insert Dishwasher Safe

  • ... flip every time you use them. Our metal utensil holder is the REAL DEAL!.
  • PERFECTLY DESIGNED - Unique modern Cooler Kitchen design features include 1) the convenience of a rotating base so you can reach every tool with ease on the fly 2) a tri-compartment divider to organize your tools more efficiently 3) a gripped insert at the bottom to ensure your tools don't slide around when in use 4) rubberized feet, so it won't scratch or stain your counter..
  • CLEANING IS A BREEZE - Our cutlery holder has rubberized feet to ensure that it won't harm your counter or slide around, and is completely RUST-PROOF. The divider and gripped insert are easily removable, for hassle-free cleaning. The whole utensil crock is 100% DISHWASHER SAFE!.
  • OUR LARGE UTENSIL HOLDER IS A WONDERFUL ADDITION TO ANY KITCHEN - 7" x7" Inches, Sturdy Metal Construction, Dishwasher Safe, Removable Divider and Gripped Insert. Add To Cart Now!.
Check Stock

Watch Link Removal Tool Kit, Watch Band Tool Kit, Spring Bar Tool Set for Watch Repair and Watch Band Replacement with Small Hammer, Professional Watch Strap Remover Repair Tool, 108PCS Spring Bar

  • ...chband removers and 6 sizes(20pcs) watch links. Watch link remover can be used in up to 1.18in wide watch band replace and can be removed 0.19in thickness of the strap, effectively remove watch link and adjust strap length. Use the watch band holder with the small hammer and punch pins can remove the watch link and insert it..
  • ⌚【Ideal for watch strap replacement】 The stainless spring bar tool with spring bar tool tips helps you easily remove the strap between the case and the watch, equipped with 18 sizes of spring bar (0.32in~0.99in), 6 for each size) and 3 pcs extra spring bar tool tips. Suitable for the replacement of 0.32in~0.99in wide watchband, the stainless spring bar tool is the ideal tool for strap replacement..
  • ⌚【 High-quality material】 Watch link remover, small hammer, spring bar, watch links are made of rust-resistant, sturdy steel, strong and durable. After 15 quality inspections, ensure that each tool is not easy to damage, suitable for long-term use for repairing watches. The product is packed in black nylon bag, compact and convenient..
  • ⌚【Easy to Use】 The watch repair kit comes with a printed user manual that can help beginners to use this tool. Finish replacing your favorite strap at home, a simple tool effectively wit....
Check Stock

Raindrip 646050B Plug, Black

  • Fits into accidentally punched holes or openings where a fitting is removed.
  • Works anywhere along the length of ½ in., 5/8 in., and 0.710 in. supply tubing.
  • Goof Plugs seals holes in supply tubing and stops leaks.
  • Push barbed end into opening by hand or with a fitting inserter tool.
  • Use the 3-in-1 Hole Punch Tool which features a holder with teeth to insert goof plug into hole.
  • Double-sided goof plugs seal holes small or large.
  • No loose pieces - goof plugs come attached together and snap off when ready to use.
  • Goof plugs are made of polypropylene (PP) treated with UV inhibitors to prevent cracking.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Cuda 8.5’’ Titanium-Bonded Fish Hook Remover Tool (18835)

  • Fishing Hook Remover: The ultimate fishing tool, this specialized piece of fishing gear and equipment is engineered for safe and easy hook removal, making it a perfect addition to your fishing tool kit.
  • Durable Construction: Constructed from corrosion-resistant aluminum alloy, our fish dehooker tool features a titanium-bonded dehooking mechanism that will not flake, blister, chip, or peel.
  • Non-Slip Grip: Great for freshwater or small salt species, our dehooker comes equipped with dual Cuda scale pattern grips for a comfortable and incredibly secure grip in all conditions.
  • Easy To Use: Insert into fish’s mouth, wrap the dehooking mechanism around the hook, pull the handle, and the mechanism will grab the hook.
  • Remove tool from fish and release the handle to open the dehooking mechanism.
  • Fierce, Tough, Proven: The Cuda brand was designed with the strength, power and agility of the Barracuda.
  • Cuda fishing products are built for ultimate fresh and saltwater fishing performance and will continue to perform over time.
Check Stock

GBJ 10pcs RCMT10T3M0 Gold + SRDCN 1616H10 5/8\ 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RCMT (SRDCN1616H10+RCMT10T3M0 YBC251)

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0001INSERTS (Coming Soon)***.
Check Stock

Upgrated to Version 2.0 - Headphone Jack Removal Tool - Headphone Plug Extraction Tool, Tubes of Different Thickness, Jack Remover

  • ...e this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us. You will get a FULL REFUND without return...
  • COMES WITH SMALL GIFT: The 3 in 1 mini screwdriver in the package is a gift for your support on my small business. It includes 1.7mm Flat head mini screwdriver, 1.7mm Phillips mini screwdriver and 2.5 mm bolt remover. It is portable and can be used to disassem....
Check Stock