Reviews Small Diameter Stainless Tubing

Capri Tools 3/16 in. Double Flaring Tool (CP21110-316) & Capri Tools Tube Bender, 1/8, 3/16 and 1/4 in. (CP21105)

Product 1: Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines.
Product 1: Works flawlessly with 3/16 in. steel, nickel, and copper tubing.
Product 1: Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots.
Product 1: Detachable die lets you also use with a bench vise.
Product 2: Easily make tight bends on round small-diameter copper, brass, and aluminum tubing.
Product 2: Use with tubing with 1/8, 3/16, and 1/4 in. outer diameter.
Product 2: Bend tubing from 0-120 degrees. Reference marks at 45 and 90 degrees for accurate bends.
Product 2: Compact design lets you work easily in tight spots.

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M04 or sub-spindle side using M03..
Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
Use with Large series toolholders. Use LH straight or RH 90 degree toolholder..

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..

1/4 INCH IRRIGATION TUBING: Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip....
CONNECT TO DRIP IRRIGATION PARTS: Connect to main supply line with 1/4 in. micro fitting. connect other end directly to emitter to deliver water to....
EASY TO USE: As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
FOR DURABILITY: Poly tubing constructed with a layering method: The outer layer, which is exposed to the sun, and the inner layer, which is exposed to....
SPECIFICATIONS: Comes with one 100 ft. coil of ¼ inch poly supply tubing.
Tubing outside diameter (OD) is 0.250 inch, internal diameter (ID) is 0.170....

Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run.
Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in..
connects to point-of-connection device using appropriate fitting.
emitters and feeder lines can be punched directly into the line or attached to the end.
Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
the middle layer is composed of recycled content.
Comes with one 500 ft. coil of 5/8 in. poly supply tubing.
Works with Raindrip products and other products with compatible connection type.

PU Tubing Pipe Material: PU( Poly Urethane ).
PU Tubing Pipe Size: 3/8" (Outer diameter) , 1/4" (Inner diameter). Package Total Length:32.8 Feet (10meters).
Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
Tubing Pipe Features: Excellent flexibility, Small bending radius.
Wide range for working temperature and pressure.
Excellent chemical properties, Minimal pressure loss.

...ube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
Easy to Operate: cutting thin stainless steel tubing has never been easier.
Simply rotate the knob to grip tube, revolve tube cutter around the pipe, tighten grip smoothly after each full circle until full cut.
It's never been this effortless to cut thin stainless steel tube.

STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..

The General Tools and Instruments 129X Mini Tubing Cutter, 7/8" performs where conventional tubing cutters simply cannot fit.
With a 1-1/2" swing radius, the Mini Cutter is ideal for limited-space applications such as refrigerator and air conditioning repair.
The adjustable jaws accept tubing sizes from 1/8" to 7/8 in diameter and up to 1/8" in wall thickness.
old Standard, tempered cutting wheels are capable of cutting through copper, aluminum, brass and thin-wall stainless steel.
The large adjustment knob allows for more torque and easier cutting.