Reviews Slotting Tool

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
Round shanks allow use with a wide variety of toolholding systems.
Can be used for drilling, slotting, chamfering, and profile milling.

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
Round shanks allow use with a wide variety of toolholding systems.
Can be used for drilling, slotting, chamfering, and profile milling.

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round shanks allow use with a wide variety of toolholding systems.
Can be used for drilling, slotting, chamfering, and profile milling.

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
Precise, smooth, no burr edges - Tungsten steel tipped cutters are sharp enough, to slice smoothly into stock producing clean, splinter free..
Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
Suitable for woodworking engraving machine, trimming machine and more, using for hand making a drawer or other woodworking.

1 inch cutting depth, 8 pc Annular Cutter set.
Incudes 2 pcs pilot pins and 6 pcs Annular cutters.
Cutter diameter of each cutter: 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'.
Pilot Pin Size:1/4" x 3" (overall length).
Cuts holes in steel accurately, quickly & safely.
Large holes can be drilled up to ten times faster than regular drills bits.
Make overlapping holes, slotting holes and edge cuts.
Machine-finish hole-no reaming needed when used with lubricant.

These files are sized for electric guitars, 3 double sided nut files, cut fast and smooth, perfect tool to slot the nut of your electric guitar..
Tapered and V shaped cutting edge for easy slotting making, made specifically for making guitar bridge and nut slots!.
Set includes 3 files with the following sizes: .010"/.013"/.017"/.026"/.036"/.046″, this is designed to be narrower than the nut size to keep the....
Total length: 193mm(7.6in), Blade length: 101m(3.98in), PVC carrying bag is provided to keep edges of files from damaging each other..
High quality metal material, long filing surface and rubber handle provide you comfortable use..

【Multi-function】The Center Finder Tool can mark the center of a wood board to a maximum thickness of 64 mm/2.52 inches. Move the scribe to draw....
【Material】The woodworking tools are made of durable ABS plastic with a smooth surface, environmentally friendly and durable.Easy to use..
【Magnetic Bottom】Attached to the iron surface helping accurate marking..
【Size】102 x 57 x 49 mm/4.02 x 2.24 x 1.93 inches, the diameter of the foot hole is about 80mm/3.14 inch..
【Application】Suitable for grooving plates, pin joints, assembly work, drilling reference line, slotting, marking out mortises and rabbets, etc..