Reviews Slotting Machine

CNC Spoilboard Surfacing Router bit, 1/2'' Shank, 2'' Cut Dia, 1/2'' Cut Length, 4 Wings, Professional Woodworking Tools by KOWOOD PRO

  • KOWOOD PRO CNC spoilboard surfacing router bit is Much more smooth & 33% more efficient than others 3 wings CNC spoilboard bit..
  • KOWOOD PRO CNC spoilboard surfacing router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial application.KOWOOD PRO carbide support this bit in heavy duty use and for long time use.
  • Versatile woodworking tool. This bit is not only specially for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming, slotting or grooving. Great replacement bit tool for woodworking carpenter.
  • Wide use application and suitable for woods, laminate, particle board, plywood compact panel.
  • Universal 1/2” Shank suitable for all major router or CNC machine.
Check Stock

XtremepowerUS 3000W Wall Chaser Cutting Machine Wall Brick Granite Marble Concrete Water Line w/Infrared Sighting Slotting Machine w/Case

  • Multifunction Use - Widely application adapt to different materials of wall, such as red brick, sand brick, brick, water brick, cement cover wall.....
  • Groove Cutting Depth Can Be Set - An Angle of 90 degrees can also be cut.Safe and ergonomically optimum handling. Ensure the safety of the users by....
  • Easy & Simple Operation - Work should take dustproof glasses and Mask. Built-in vacuum port and water pump work at the same time to reduce the dust....
  • One Time Molding - Fast automatic grooving wall tank,suitable for quick and clean cutting of wall chases. Without any auxiliary tools and the second....
  • Built-in Infrared Beam - Wall slotting machine is equipped with infrared rays and rollers. When working, it uses the roller to stabilize the....
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

Yonico Router Bits Set 15 Bit 1/2-Inch Shank 17150 Professional Carbide Tipped Roundover, Cove, Chamfer, Bevel, Dovetail, Straight, Flush Trim, Slotting, Roman Ogee fresas de Router para Madera

  • A perfect 1/2" shank starter set with a great selection of Router bits to accomplish a variety of basic routing jobs such as edging, joining, trimming and slotting..
  • Includes: 4 Dado/Straight Bits - 1/4", 3/8", 1/2" and 3/4" 1 Flush Trim Bit - 1" x 1/2" 1 Dovetail Bit - 1/2" x 10° 1 V-groove bit - 90° 1 Core Box Bit - 1/4" Radius.
  • 1 Chamfer Bit - 45° 2 Cove Bits - 1/4" Radius & 1/2" Radius 1 Roman Ogee Bit - 5/16" 2 Round-Over Bit - 1/4" Radius & 1/2" Radius 1 Rabbet/Slotting Bit - 1/2" H x 3/8".
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. The bits are also coated with teflon which helps to reduce friction and heat build-up..
  • Silver induction brazing for maximum strength and durability. The set is presented in a durable storage case for easy organization and transportation..
Check Stock

Northbear-12v submersible pump, 1.2A DC low-noise miniature water pump, with 1.5m cable, 5M head 14L/Min, 600L/H, 6-15V, suitable for fluid tap water, groundwater, seawater, sewage transfer pump 1

  • Size: Small water pump 98 mm (height) * 38 mm (diameter) Outlet outer diameter: 12mm Outlet inner diameter: 9.7mm.
  • Application range: It can be used with slotting machine, cutting machine, rhinestone tools, and can also be used as a water tool for household watering, pumping, draining, long-distance water transportation and changing water for fish tanks..
  • Applicable environment: can be used between -20°~40° water temperature. It is a submersible pump with very good waterproof performance and a service life of 3000 hours..
  • Maximum lift: 5M (Note: indicates the height that water can reach if you connect the plastic pipe to the pump) Maximum flow: 600L/hour.
Check Stock

CNC Spoilboard Surfacing Router Bits 1/2 inch Shank 2 inch Cutting Diameter Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool by BINSTAK Carbide

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE WOODWORKING TOOlS: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTER BIT: Suitable for solid woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

CNC Spoilboard Surfacing Router Bits, 1/4 inch Shank 1 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK (Carbide)

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank Slab Flattening Router Bit Carbide Planer Router Bits Wood Milling Cutter Planing Tool Woodworking Tools by BINSTAK

  • 4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
  • HIGH QUALITY CNC ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE WOODWORKING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE: Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
  • GIFT: Router Collet Reduction Sleeve Tool Bit. For turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Inner diameter: 6.35 MM. Outside diameter: 12.7 MM.
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock