Reviews Single fall Arrest System

Summit Treestands Summit Dual Pro Ladder Stand

New brown powder coat adds concealment and weather protection for this roomy steel frame ladder stand.
Full backrest and thicker bench seat cushion design, includes padded gun rest.
Weighs 88 pounds with a weight capacity of 350 pounds for one hunter, or two persons at 250 pounds each.
Platform size 39″ x 32″ with seat base of 37.25″ w x 14″ L.
Includes full body Fall arrest harness System and all necessary hardware.

...tible with other lanyards with shock absorbers, roof lifelines, and anchorage tether lanyards. Safely perform the job knowing the SCORPION fall protection harness has your back!.
HEAVY DUTY D-RING: One back dorsal ring is all it takes to provide functionality on the construction job. The dorsal ring is used for fall arrest & can be used for travel restraint or rescue. The pass-through buckles on our universal harness are made out of synthetic material that is superior to polyester. For some jobs, more fall prevention accessories may be necessary. If an anchor point is needed, like a roofers anchor point or scaffold cross arm strap, we have kits and combos available!.
PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our large adjustable KwikSafety SCORPION full body harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg), 4’10” to 6’6” (147 to 198 centimeters) due to the adjustment points. To ensure your harnesses properly fit, see that all buckles are connected, leg and shoulder straps are snug, and chest straps are in the center of the chest area..
WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full B....

Ergonomic design supports the lumbar, large platform takes the pressure off feet for longer stays in the stand without fatigue.
Folding steel frame weighs just 28 pounds for easy portability, weight capacity of 300 pounds.
New brown powder coat finish gives the peak added concealability while adding a durable finish that resists wear and the weather.
Includes full-body Fall arrest harness System and all necessary hardware.
Built to last and Backed by summit’s one-year limited Warranty.

Suspended foam-padded seat with backrest.
18 ”W x 12” D Seat Size, 20” W x 24.75” D Platform Size.
Includes Full Body Fall Arrest Harness System and all necessary hardware.
Aluminum 5-Channel Platform Frame with Dead Metal, Sound Deadening (SD) Technology.
Four-Point FAS (harness) with safety strap and attached SRS strap.

Closed-front aluminum climbing stand with Mossy Oak Break-Up Infinity camo finish.
Suspended foam-padded seat with backrest.
18” W x 12” D seat size, 21”W x 30.75” D platform size.
Includes Full Body Fall Arrest Harness System and all necessary hardware.
350-pound weight capacity to handle heavier hunters and their gear.
The two-piece seat also buckles, allowing you to remove your seat quickly.
Comes complete with 4-point safety harness, Rapid Climb Stirrups, pads, hardware, ropes and straps.

WE DON'T CUT CORNERS ON SAFETY: This construction harness is a durable, heavy duty, high performance Full Body Harness that meets and exceeds....
HEAVY DUTY D-RINGS: Our fall arrest harness is fully equipped with two side (2) D Rings and (1) Dorsal Ring suitable for primary fall arrest....
PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our adjustable....
WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 - All of KwikSafety’s full-body harnesses have undergone the “Qualification and....
OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and....

Closed-front aluminum climbing stand with Mossy Oak Break-Up Infinity camo finish.
Suspended foam-padded seat with backrest.
18” W x 12” D seat size, 21”W x 30.75” D platform size.
Includes Full Body Fall Arrest Harness System and all necessary hardware.

WELKFORDER Body Belt WFB002 is part of a personal fall arrest, restraint, work positioning, suspension, or rescue system. Applied to Construction, Roofing, Camping, Window cleaning, and Surveyor etc which should be composed of an anchorage and a Full Body Harness (FBH), with a Shock Absorbing Lanyard, or a Self‐Retracting Device. Complies with OSHA 1926.502 and ANSI Z359.3‐2007 when integrated into a full body harness..
WELKFORDER Body Belt WFB002 has a Hot-Pressing Waist Pad with a unique ergonomic design consisted of two pads made of high quality EVA foam and Oxford fabric provides dry fit, comfort, flexibility and compact support for all-day working. The waist pad is ergonomic designed of size 30” long, 8”wide in the middle and 4.7”wide at sides..
WELKFORDER Body Belt WFB002 has two Plated Sides D-Ring with Min. Breaking strength 5000lbs/22KN, corrosion resistant, Compliant with ANSI/ASSE Z359.12-2009 provide premium safety. The Sides D-ring should be connected with a compatible connector as a work positioning system. DO NOT use the side D-rings in a fall arrest application..
WELKFORDER Body Belt WFB002 Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance cha....

A built-in RFID identification tag helps the user record and store information on inspections.
Compact and durable housing is designed to withstand the demands of challenging jobsites, it's built to last.
Stops a falling worker within inches, providing more protection at low heights Designed for smooth consistent operation allowing the user to maintain normal work pace and not be interrupted with constant lock ups.
Specialized built-in external absorption system maintains safe fall arrest forces for users and tools up to 420 lbs (190 kg) and provides a visual alert that the SRL has been involved in a fall.
11 ft (335m) of 3/4" (19mm) Dyneema fiber and polyester web and swiveling snap hook, swiveling anchor loop with carabiner.