Reviews Single Phase Relay

Wired DC-AC 3Amp Isolated Solid State Relay Module, SSR in 3-32VDC Out 90-250VAC

10DA/25DA/40DA/50DA/50DA-H/60DA/75DA/80DA/100DA/25AA/40AA/50AA/60AA/5AA/80AA/100AA/10VA/25VA/40VA/50VA/60VA/75VA/80VA/100VA.
load voltage: 24~480V/AC，Control voltage 3-32VDC.
SSR -10DA/25DA/ 40DA/50DA/50DA-H DC control AC SSR white shell Single phase Solid state relay WITHOUT plastic cover.
work instruction: LED，In the closed state, special scenarios where the off-state leakage current is less than 5MA are not applicable. Please purchase with caution..

Suitable for using in power system with rated isolation voltage up to 690V, circuit of 50-60hz.
Can be used as overload protection of your long term or indirect long term service motor.
Used for protecting the phase break when the electric motor is overload.
The relay has different mechanism and temperature compensation.
With phase break protection, manual and automatic reset, temperature compensation, trip indication, test button and stop button.

COMES ON AT 185 degrees AND TURNS OFF AT 165 degrees ..
Works for: 2 x 8 inch Fans 2 x 10 Inch Fans 2 x 12 Inch Fans 2 x 14 Inch Fans Single 8 Inch Fan Single 10 Inch Fan Single 12 Inch Fan Single 14 Inch Fan Single 16 Inch Fan (Two 16 inch fans, need 2 Relay Kits).
Included in this Relay kit: 185 Degree Thermostat Switch 1 Relay Wire Harness 1 3/8″ NPT Thread-In Probe 2 Ring Terminals 2 Fan Pigtail Connectors Included 1 Fuse Holder 3/8″ to 1/2″ Adapter 30 & 40 amp Fuses,English instruction.

Low cost for high volume OEM installations.
Electrical isolation between circuits, output relay rated up to 20 Amps.
LED trip status indicator, dead band prevents relay chatter.
Calibrated dial option available, external current transformers available.
Applications: monitor electrical heater elements, sense motor over/under loads, detect lamp burn-out, indicate phase loss.
Variable trip point and time delay, monitors currents from 10 mA to 60 AC amps.

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Working Range: Suitable for using in power system with rated isolation voltage up to 690V, circuit of 50-60hz.
Longer Service: Can be used as overload protection of your long term or indirect long term service motor.
Protection Function: Used for protecting the phase break when the electric motor is overload.
Temperature Compension: The relay has different mechanism and temperature compensation.
Multifunctions: With phase break protection, manual and automatic reset, temperature compensation, trip indication, test button and stop button.

This monitoring relay can monitor own working voltage..
8 kinds of rated voltages are adjustable, can apply to voltages in all regions of the world.
The working status of the relay is indicated by the LED indicator.
Ultra-small size and it is easy to install..
It is applied to mobile device connection control, causing accidents in equipment protection against reverse operation, normal/emergency power switch, preventing phase failure of power load..

Price For: Each Standards: UL, CSA Enclosure NEMA Rating: No Enclosure Starter Type: NEMA Style Hz: 50/60 Item: NEMA Magnetic Motor Starter Auxiliary Contact Form: 1NO Number of Poles: 3 Overload Relay Amp Setting: 5.50 to 22A Action: Nonreversing NEMA Size: 1 Width: 3.5" HP @ 3 Phase - 575V: 10 HP @ 3 Phase - 480V: 10 HP @ 3 Phase - 240V: 3.
HP @ 3 Phase - 208V: 3 Height: 7.44" Depth: 3.75" Coil Volts: 120VAC Amps AC: 27 Country of Origin (subject to change): Mexico.

【Measuring Circuit】Phase sequence protection relay is compatible with AC and DC supply, the rated voltage is AC/DC 24-48V.
【High-quality Product】LCD display indicating voltage, operation and fault status, adjustable reset mode: automatic/manual/automatic with power-on delay reset, fault recording for the lately 3 faults.
【Mutiple Functions】Adjustable overvoltage and undervoltage threshold, independent adjustable delay time for over-voltage, under-voltage.
【Output Contacts】Monitoring relay with 1 CO + 1 NC contacts, and the capacity is 6A, 250V AC (resistive load).
【Wide Applications】Voltage monitoring sequence relay can be applied in equipment or devices from undervoltage and overvoltage in the applications like air compressors, electric motors, pumps, fans, air-conditioning system, blowers, elevators, cranes, refrigeration equipment, laser equipment, industrial control system, etc..