Reviews Single Acting Cylinders

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..

Double Acting: Hydraulic control valve for operating double acting cylinders..
Durable Quality: Come with 3 spools and #8 SAE O-ring in/out ports, with cast iron construction for long-time use..
High-efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

Durable Quality: Come with 2 spool and #8 SAE O-ring in/out ports, with cast iron construction for long-time use..
Double Acting: Hydraulic control valve for operating double acting cylinders..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
High-Efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

Double Acting - 2 Spools monoblock for double acting cylinders..
Durable Quality - This hydraulic directional control valve comes with 2 spool, with cast iron construction for long-time use..
Features - Open Center 4-way 3 position Tandem Spring Center..
High-Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM(50L)..
Wide Application - Fit for small tractors, tractors loaders, log splitters, and etc..

Widely Used: Comes with 2 spool and #8 BSPP in/out ports, with cast iron construction for long-time use.
Double Acting: Hydraulic control valve for operating double acting cylinders..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
High-Efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

These have an air inlet, an air outlet and an exhaust port..
Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
Has two 1/4"air ports and one 1/4"breather port. Comes with: 1/4" 4-Way Solenoid (2) 1/4"Male Straight fittings with 1/4"push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.

Input air pressure range is 100 to 200 psi.
High strength reinforced aluminum alloy reservoir is lightweight and corrosion resistant.

These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..