Reviews Single 1inch Subwoofer

PyleUsa Single Voice Coil Car Subwoofer - 8 Inches, 200 Watts at 4-Ohm Car Audio Powered Subwoofer, Injection Cone with Rubber Edge, High-Powered Car Subwoofer, Audio - PLMW83 Black

EXCELLENT POWER HANDLING: With a maximum power handling of 200 watts, a peak RMS of 100 watts, and 4-ohm impedance, this single voice coil subwoofer can bring out a bassy sound for any sound you will play in your vehicle.
EASY INSTALLATION: Install this single voice coil subwoofer in your vehicle in no time! Featuring a quick connect speaker terminal plate, attaching this to your car would require less effort than usual. Speaker dimension is 8.3 '' x 8.3'' x 2.9''.
EXCELLENT SOUND QUALITY: Excellent quality typically has speed and response while producing very clear bass lines, so the fastest bass lines will be clearer, therefore making the audio sound fuller and better.
PRO WOOFER PERFORMANCE: This subwoofer can reduce distortion and eliminate the need for acoustics in-car speakers. When a full-range speaker produces bass at a low frequency, the speaker's diaphragm can cause distortion.
BUILT TO LAST: Made with engineered ABS, this subwoofer is designed for custom audio vehicle applications. Also featuring a massive butyl rubber surround and high....

This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....

SINGLE 10 INCH SUBWOOFER ENCLOSURE: Our Bbox 10 Inch Subwoofer Box is designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. Feel, hear, and experience the difference today..
OEM-FIT: The 10in subwoofer box is designed and engineered specifically to be compatible with 2002-2018 Dodge Ram Quad Cab to ensure an OEM fit without impeding the operation of the back seat. The subwoofer mounting depth is 6 inches, which is ideal for low profile subwoofers. All our vehicle-specific enclosures are built with a near perfect factory fit in mind..
HIGH GRADE MDF: Our subwoofer box enclosure is built with a durable high-grade MDF that is 3/4 inches thick for solid frequency response and accurate music reproduction. The thick MDF panels and no flex construction on our 10 inch subwoofer box allows for tight and accurate bass reproduction..
AIRTIGHT RECESSED SIDE PANELS: By using premium materials and aliphatic resin wood glue, the solid construction of our subwoofer boxes are airtight and resonant free. This greatly reduces rattles and improves the overall sound quality of your sound system..
BETTER SOUND, BETTER BASS, BETTER FUN: Get the party started with sound quality you can truly jam to. Our subw....

Universal fit - single chamber 18" Ported subwoofer enclosure.
Competition Grade - high performance subwoofer box | engineered to sound incredible.
Kerf (rounded) port design - allows for deep, accurate, and responsive bass.
Internal air space: 4.75 ft³ | tuned @ 29 Hz.
Subwoofer hole cut-out diameter: 16.625" | Mounting depth: 13.50".

Universal fit - Single chamber 15" Ported subwoofer Enclosure.
Competition Grade - High performance subwoofer box | engineered to sound incredible.
Kerf (rounded) port design - allows for deep, accurate, and responsive bass.
Internal air space: 3.85 ft³ | tuned @ 31 Hz.
Subwoofer hole cut-out diameter: 13.875" | mounting depth: 18.00".

Front Channel High Pass Frequency Extender, Subwoofer Frequency Selector..
Phase Inverter Subwoofer Stereo/Mono Switch..
Subwoofer boost: Single octave 0dB to 12dB (variable) at 40 - 120 Hz(Variable)..
Subwoofer Output Level Remote Control Terminal..

This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....

All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package.
Peak Power: 1,200 Watts | RMS Power: 600 Watts.
Includes x1 Skar Audio SDR-1X15D2 Single 15" Loaded 1,200 Watt Vented Subwoofer Enclosure.
Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit.
High Performance Aftermarket Subwoofer System | Easy to Install.

Universal Fit - Single Chamber 12" Ported Subwoofer Enclosure.
Competition Grade, High Performance Subwoofer Box | Engineered to Sound Incredible.
Kerf (Rounded) Port Design - Allows for Deep, Accurate, and Responsive Bass.
Internal Air Space: 2.00 ft³ | Tuned @ 36 Hz.
Subwoofer Hole Cut-Out Diameter: 11.00" | Mounting Depth: 13.75".