Reviews Singe Phase Motor

Huanyang Vector VFD Variable Frequency Drive ,Single to 3 Phase,4kW 5HP 220V AC 17A for Motor Speed Control ,GT Series

  • 【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz.
  • 【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency,and supports remote external potentiometer control.
  • 【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc..
  • 【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life..
  • 【Warranty】: 1 Year replace .If there is an error in the product and you do not know how to operate, please contact the seller.
Check Stock

Mophorn 1 Hp Electric Motor 3450 RPM 11.2-5.6 A Single Phase Motor AC 115V 230V Air Compressor Motor 56C Frame Suit for Agricultural Machinery and General Equipment

  • Single Phase: The motor is 1HP single phase electric motor, features with 115/230V voltage and 11.2/5.6A full load amperage.
  • Fitted Frame and Shaft: With 56C frame, the electric motor also has 1.875 inch length and 0.625 inch diameter keyed shaft.
  • High Speed: The electric motor features 3450RPM rated speed and 3600RPM synchronous speed. High speed meets your different needs..
  • Fan Cooled: Our electric motor is TEFC (Totally Enclosed Fan-Cooled) motor. A built-in fan helps to dissipate heat and prevent the motor from overheating..
  • Universal Motor: Universal Motor- Universal used for the matching of water pumps, agricultural machinery and general equipment..
Check Stock

Huanyang Vector VFD Variable Frequency Drive ,Single to 3 Phase,7.5kW 10HP 220V AC 34A for Motor Speed Control ,GT Series

  • 【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz.
  • 【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.support fast accelerate/deccelerate with external optional braking resistor and external potentiometer,and.
  • 【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc..
  • 【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life..
  • 【Warranty】: 1 Year replace .If there is an error in the product and you do not know how to operate, please contact the seller.
Check Stock

VEVOR Air Compressor Electric Motor, 5 HP SPL 3450 RPM, 208-230 Volt 3.1 KW Single Phase, 56 Frame 5/8" Keyed Shaft 60 Hz, Commercial-Duty CCW Rotation, 1.88" Shaft Length NEMA for Air Compressors

  • Single Phase Induction Motor: This compact powerful electric motor runs at 5 HP SPL 3450 RPM max speed. Frame type: 56. Input power: 3.1 kW. Full Load Amp: 15 - 16 A. Voltage: 208-230 V 60 Hz. Rotation: Non-reversible CCW. Shaft length: 1.88 in / 4.8 cm. Shaft diameter: 5/8 in / 1.59 cm keyed. Phase: Single phase. Service factor: 1.15..
  • Steel Housing: The motor shell is made of steel. The robust and reliable body can guard the internal circuit well against overheating. The attached steel bracket also offers excellent stability. Two capacitors and high-quality ball bearings ensure long service life..
  • Overload Thermal Protector: The heavy-duty electric motor adopts a manual reset knob against high-temperature overload. Reduced starting amperage design ensures the reduced voltage starting at a rated load. Insulation class-F, ENC-IP23, Ambient temperature-104℉ / 40℃, Duty-CONT, Pole-2..
  • Heat Dissipation Holes: The air compressor motor has multiple heat dissipation strips for heat dissipation. It can also guard chips and objects against dropping in the motor and causing accidents..
Check Stock

110V 60W Ac Gear Motor Electric Single-Phase Motor Gear Motor 0-135RPM Variable Speed Adjustable Controller Governor Geared Motor and Adjustable Speed Controller Combo (Reduction Ratio 1:10, 60W)

  • ...AL] The 60W deceleration motor can achieve super fast speed of 1350 RPM, thus ensuring high efficiency.And the motor has the characteristics of heat resistance, low noise, high quality and long service life.The motor has a compact body, lightweight structure, easy to carry and operate..
  • [ADJUSTABLE SPEED] The single-phase motor also has a reduction gear box and a governor, the speed regulator has a large torque, with a variety of optional speeds.Therefore, it is more convenient to use. You can adjust different speed according to different products to achieve the desired effect. It is very convenient and fast to use..
  • [SPECIFICATIONS] Name: AC gear motor. Rated voltage: 110V. Rated speed: 0-135 RPM. Reduction ratio: 1:10(10K). Torque: 3.8nm. Power Phase: single-phase. Shaft diameter：0.5inch. Geared motor size：5.5inch * 3.5inch *3inch. Reducer size: 1.6*3.5*3inch. Packing list:1 x motor, 1 x reducer, 1 x speed controller..
  • [QUALITY ASSURANCE] Our products are shipped directly from the US warehouse. We have strict quality control system, our products are put into the market after rigorous testing. We provide friendly customer services forever. If you have any questions or quality issue,please feel free to contact us..
Check Stock

MYSWEETY CNC Spindle Motor Kits 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC Router

  • ✔️Package include: ①1 x 2.2KW 220V Spindle Motor ②1 x 2.2KW 220V VFD ③1 x 75W 220V Water Pump ④1 x 196 in Water Pipes ⑤1x40 in Electric....
  • ✔️2KW Spindle Motor：Technical Parameters:φ3 x 13 in (Diameter: 7.5 cm x Length: 33.6 cm).
  • ✔️Water Pump：This is a high-performance, energy-efficient pump and is well-designed for use in spindle, suitable for 0.8KW, 1.5KW, 2.2KW, 3KW....
  • ✔️1 Year Warranty：We offer 1 year warranty, if you have any questions, please contact us, our customer service team are waiting for helping you....
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

Grizzly Industrial G0791-12" X 36" Combination Gunsmithing Lathe/Mill

  • Lathe motor: 2 HP, 220V, single-phase, 8.5A.
  • Mill motor: 3/4 HP, 220V, single-phase, 4.5A.
Check Stock

VFD Single to 3 Phase, 4kW 220V AC Single-phase Variable Frequency Drive Inverter, VFD Speed Controller Inverter for 3-phase Motor

  • Output phase: three-phase.VFD Dimension: 100 x 140 x 150 mm (L x W x H)..
  • The phase converter features low noise and low electromagnetic interference, through the optimization of PWM control technology and electromagnetic compatibility of the overall design. There is enough space for heat dissipation between electronic components, and the shell adopts porous heat dissipation..
  • 【Smart Digital Display】 Adopting user-friendly keyboard design & reasonable layout, easy to operate.
  • digital display, intuitive and clear. The detachable design is convenient for remote control..
  • 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines..
  • 【Importent Note】 No support external resistor(the function needs to be customized by notifying the seller before purchase),If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion..
Check Stock