Reviews Silicon Carbide Heating Element

Dremel 85422 Silicon Carbide Grinding Stone, Silver

  • Turn your rotary tool into a powerful rotary grinder with Dremel's silicon carbide grinding stones.
  • Ideal for sharpening, deburring and general purpose grinding on harder materials.
  • Designed to work well on stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
  • What's Included: 25/32" Silicon Carbide Grinding Stone (x1).
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

MJR Tumblers 4 LB per Polish 60 90 Silicon Carbide Rock Refill Grit Abrasive Media Step 1 USA

  • 4 pounds of 60/90 Graded Silicon Carbide Grit (Step 1).
  • Superior Blend of Green/Black Silicon Carbide.
Check Stock

Beaquicy 279838 W10724237 Dryer Heating Element Assembly Replacement for Whirlpool Ken-more Roper Dryer 3977393 3392519 Dryer Thermal Fuse & 3977767 Dryer Thermostat & 3387134 Cycling Thermostat

  • ✅【HIGH QUALITY NICKEL-CHROMIUM ALLOY】--- The 279838 heating element Assembly is made of high-quality NICKEL-CHROMIUM ALLOY and contains heating wire coils.The dryer heating element has a nickel-chromium content of 90%. And the length of the heating wire is 25% longer than other common dryer replacement parts.More uniform heating & no damage to clothes.279838 dryer heating element is rated at 5400 Watts 240 Volts and it has 2- 5/16 inch male connection terminals..
  • ✅【COST-EFFECTIVE 279838 HEATING ELEMENT KIT】---Includes 1 x 279838 Dryer Heating Element,1 x 3392519 Thermal Fuse,1 x 3977393 Thermal Cut-off,1 x 3977767 Dryer Thermostat,1 x 3387134 cycling thermostat with screws and wiring kit.▶3392519 Dryer thermal fuse, has two 3/16" wire terminals.▶279816 Thermal Fuse & Thermostat Kit includes thermal fuse, thermostat, screws, wiring kit.▶3977767 Dryer high limit thermostat has one 1/4" male terminal, 1/4" female terminal, and one 3/16" male terminal. L221..
  • ✅【WIDE COMPATIBILITY】--- 279838 Dryer Heating Element Kit replacement for Whirlpool, Ken-more, Crosley, Roper, Estate, Amana, Admiral and more brand dryer. R....
Check Stock

Tockrop 24 PCS 1/2″ x 10″ Knife Sharpener Sander Belt Set for Work Sharp WSCMB Combo Knife Sharpener- 4 PCS each of 80/120/240/400/1000/1200 Grits

  • The 1/2″ x 10″ Replacement Belt Kit is for Work Sharp Combo Knife Sharpener (model WSCMB) and do not work with other Work Sharp products..
  • 24 Pcs 1/2″ x 10″ Sanding Belts in total, including 4 pcs 80 Grits Zirconia belts, 4 pcs 120 Grits Zirconia belts, 4 pcs 240 Grits Alumina belts, 4 pcs 400 Grits Alumina belts, 4 pcs 1000 Grits silicon carbide belts and 4 pcs 1200 Grits silicon carbide belts..
  • As a professional sanding belt manufacturer, after hundreds of trials, we find that for a knife sharpner, the best material for coarse grit is zirconia, for medium grit is alumina and for fine grit is silicon carbide. So we provide this Replacement Belt Kit for perfect sharpening..
  • Precision engineered dual directional tape joints allow a smooth transition in either direction..
  • Anti-clogging compounds extend the lifetime of the belts..
Check Stock

W11344457 Dryer Heating Element 3387747 - Suitable for Whirlpool Kenmore elite he4/90 series heating element Exact fit medc700vw0, 110.82822101, gew9200lw1, gew9250pl0,etc.

  • ✅【3387747 HEATING ELEMENT】-- 3387747 Dryer Heating Element Assembly is used in dryers, effectively generates heat in an electric clothes dryer to dry clothes. The package includes 1 x W11045584 heating element, includes the housing with the heating element coil and insulators attached. The size is about width 5.7 inch × length 13.8 inch. The WP3387747 dryer heating element power is 5400 watts and the voltage is 240 volts. This heating element has 5/16" terminal ends..
  • ✅【HIGH NICKEL CHROMIUM CONTENT】-- The whirlpool 3387747 dryer element is made of high quality metal and contains heating wire coils which have the nickel-chromium content reaches 85% for generating heat effectively in electric dryer. The insulators are made of high-tem-perature ceramic. They are firmlymounted into the frame to hold theheating coil, which will not come looseunder the vibration of a running machine. To confirm that the heating element is faulty, unplug the dryer when the symptom occurs in time..
  • ✅【SUITABLE FOR MOST DRYER MODELS】-- This 3387747 Dryer Heating Element Assembly fits for Ama-na, Ken-more, Kitchen-Aid, May-tag, Whirl-pool dryer. ◆3387747 Replaces....
Check Stock

3387747 PS11741416 Dryer Heating Element by Blutoget - Fit for Whirlpool Amana Ken-more Kitchen-Aid Dryer - Replaces WP3387747 W11344457 W11045584 AP6008281 AP2947033 PS344597 MEDC700VW0 GEW9200lW1

  • ✅【3387747 DRYER HEATING ELEMENT】:WP3387747 Dryer Heating Element Assembly can be used in the dryer to help generate heat to dry clothes. The whirlpool dryer heating element W11344457 is made of high quality METAL and contains heating wire coils which have the Nickel-chromium content reaches 85% for generating heat effectively in electric dryer. More heat and abrasion resistant to maintain a long and effective use time.Insulators are made of high-temperature ceramic. They are firmly mounted into the frame to hold the heating coil, which will not come loose under the vibration of a running machine. W11045584 AP6008281 heating element is rated at 5400 Watts/240 Volts and has 2 5/16" terminals..
  • ✅【GREAT VALUE PACK】 : Includes 1 x whirlpool dryer heating element W11045584 5400w 240v. WP3387747 Dryer Heating Element product upgrade has better heat resistance and wear resistance,the content of nickel and chromium is higher, which can reach more than 85%. Whirlpool duet dryer heating element WP3387747 fixes the following symptoms:dryer too hot, no heat, not enough heat, takes too long to dry, unusual noises, loud noises. W11344457 dryer heating element replaces your old and broken dryer parts to hel....
Check Stock

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

  • 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
  • How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
  • 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
  • It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
  • Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check Stock

279838 Dryer Heating Element Assembly by Beaquicy - Replacement for Whirlpool Ken-more Dryer - 4531017 Dryer Heating Element

  • ✅【279838 DRYER HEATING ELEMENT】-- Includes 1 x 279838 dryer heating element assembly.The coil on the heating element accepts and resists the controlled current, thus heating the wire.The heat generated is used to dry the clothes in the dryer.279838 Dryer heating element assembly contains 85% chromium and the length of the heating wire is 25% longer than other replacement parts of the ordinary dryer.It is rated at 5,400 watts and 240 volts and has a 2-5/16 "male terminal..
  • ✅【HIGH QUALITY NICKEL CHROMIUM ALLOY】-- 279838 Dryer heating element assembly includes the housing with the heating element coil and insulators attached. The heating coil is made of an alloy of nickel and chromium.It has a high resistance that prevents itself from breaking and burning out. The insulators are made of high-tem-perature ceramic. They are firmlymounted into the frame to hold theheating coil, which will not come looseunder the vibration of a running machine..
  • ✅【90 DAYS WARRANTY】-- Product whirl-pool 279838 dryer heating element assembly support 90 days return and exchange. Our company attaches great importance to the shopping experience of every customer. No ....
Check Stock

279838 3403585 & 3977767 & 3392519 Clothes Dryer Heating Element Kit for Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef Dryer

  • 【Design】 High quality dryer heating element kit, the heating element is a metal chamber containing a heating wire coil (Nickel-chromium alloy) for generating heat in the electric dryer, including 2-5/16″ male terminals.
  • 【Fitment】 The Clothes Dryer Heating Element Kit fits Kenmore Model: 11060222510, 11062332510, 11065212610, 11065232610, 11066134610.
  • and Others Name Brand: Whirlpool, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef.
  • 【Composition】 The heating element includes a heating coil, a thermostat and a temperature fuse. Heating coil heating air, blowing into rotary drum to dry. The thermostat regulates the temperature to a safe range. Temperature fuse cut off current to avoid sudden safety hazard caused by overheating.
  • 【Package Includes】 1 * 279838 heating element, 1 * 3977767 cycling thermostat, 1 * 3392519 dryer thermal fuse.
  • 【Replacement Part Number】 heating element replacement for numbers: 279837, 279838, 279838A, 279838VP, 3398064, 3403585, 8565582, AP3094254, W10724237.
  • dryer cycling thermostat replaces part numbers: 3977767, 3399693, WP3977767VP, AP3131941, 898078.
  • dryer thermal fuse replaces part number 3388651, 3392519, 694511, 80005, WP3392519VP.
Check Stock