Reviews Signal Generator Software

Koolertron 15MHz High Precision DDS Signal Generator Counter,Upgraded Dual-Channel Arbitrary Waveform Function Generator Frequency Meter 266MSa/s (15MHz)

  • Arbitrary Waveform Generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened..
  • Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine, Square, Triangle, Pulse, Partial Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, sine pulse, Lorentz Pulse, and 60 kinds user defined waveform etc. each channel can be independently set the parameters..
  • With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function..
  • Storage feature: You can store 100 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 15MHz. 266MSa/s sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048 and vertical resolution is 14 bits.
  • This Signal Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientif....
Check Stock

Pulse Generator, DROK 2pcs LCD Display PWM Frequency 1Hz-150kHz Duty Ratio 0-100 Percent Adjustable Square Wave Rectangular Wave Signal Generator Board

  • DROK pulse generator module operating voltage range is DC 3.3-30V, adjustable pwm frequency range is 1Hz-150kHz, adjustable duty ratio range is 0%-100%..
  • Application: it can be used as a square wave signal generator, generate square wave signal for experimental development.
  • generate square wave signal to control the motor driver.
  • generate adjustable pulse to control the relevant circuit (PWM dimming speed application etc)..
  • High Frequency Resolution: frequency in range 1Hz~999Hz, display resolution is 1Hz.
  • range 1.00kHz~9.99kHz, display resolution is 0.01kHz.
  • range 10.0kHz~99.9kHz, display resolution is 0.1kHz.
  • range 1kHz~150kHz, display resolution is 1kHz..
  • TTL Level Communication: the frequency meter is designed with single-chip TTL level communication, communication standard is 9600 bps..
  • LCD Display: the blue LCD clearly displays frequency and duty ratio, PWM output can set frequency and duty ratio independently..
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 250MHZ 2CH, 50MHz Built-in Waveform Generator

  • Product 1: UNI-T Arbitrary Waveform Generator UTG932. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-30MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

1HZ-500KHZ DDS Functional Signal Generator, Seesii DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth Waveform

  • 1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a battery..
  • It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope..
  • The square waveform is suitable for oscilloscope attenuator and the adjustment of probe impulse response..
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
  • This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional worker..
Check Stock

2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1

  • ...d pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields..
  • ✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • ✅【PC Control】:Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel..
  • ✅【Ultra-long Battery Life】:The upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charg....
Check Stock

Hantek 6074BD Oscilloscope with AWG, PC USB oscilloscope 4 Channels 70MHz Bandwidth 1GSa/s Sample Rate

  • 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronizing Signal + External Trigger.
  • The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously.
  • Large and clear display (7 inch 64K color LCD display, Resolution 800x480), more clear and realistic waveform.
  • Oscilloscope: 1GSa/s Sample Rate, 200/100/70MHz Bandwidth, more than 20 kinds of auto measurement functions.
  • Powerful Trigger Function: Edge, Video, Pulse, Slope, Over time, Alternative003cbr003e 6.Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle 7.wave/trapezoidal wave/pulse wave/DC is easy to simulate transducer.
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 4CH, 50MHz Built-in Waveform Generator (MSO3254E 250MHz 4CH)

  • Product 1: UNI-T Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • ...MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Window....
Check Stock

RF Explorer Digital Handheld Spectrum Analyzer 6G Combo Plus - Slim

  • ...al time charts, historical charts, save data to CSV files and export to other tools such as WW6 or MatLab, define markers and limit lines and much more. Free open source API and libraries are available to customize your own applications and services..
  • [Tracking mode enabled] – When combined with RF Explorer Signal Generator the analyzer can perform full tracking SNA to define Gain, Attenuation and SWR for 1 and 2 port RF devices such as filters, amplifiers and antennas..
Check Stock