Reviews Sight Glass Liquid Flow Rate Indicator

Whatman 1821-090 Glass Microfiber Binder Free Filter, 1 Micron, 12 s/100mL Flow Rate, Grade GF/B, 9.0cm Diameter (Pack of 25)

Three times thicker than Whatman grade GF/A, higher wet strength.
significantly increased loading capacity.
Combines fine particle retention with good flow rate.
particularly useful where liquid clarification or solids quantification is required for heavily loaded fine particulate suspensions.
Can be used as a finely retentive membrane prefilter.
used in LSC techniques where high loading capacity is required.
Grade GF/B Filter for Liquid Scintillation, 90 mm circle.

DEEP BREATHING THERAPY: Designed for patients to correctly perform and monitor their own breathing exercises, even without direct supervision. It has easily adjustable patient goal indicator that provides a volumetric goal for adequate lung exercise..
DUAL-SIDED GRADUATIONS: The highly legible calibrations clearly identify achieved volumes of up to 4,000 mL capacity. Clinicians and patients can easily read results from either side of the unit..
FLEXIBLE TUBING: The swivel mouthpiece allows the patient to easily adjust for use in various positions. Mouthpiece holder provides a place to store the mouthpiece when not in use..
INSPIRATORY FLOW INDICATOR: Encourages patients to maintain a slow, proper rate of inspiration. Slow inspiratory flow rate promotes even distribution of inspired volume for enhanced therapy..
EASY TO GRIP HANDLE: Handle is easy to grip and helps ensure that patients use the spirometer in an upright position for proper therapy. Handle can also be placed onto bed rail for safe storage and easy accessibility..

HEAVY DUTY 1/2" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK..
175 PSI MAX PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED. PLEASE NOTE: 1/2" NPT OUTSIDE THREAD DIAMETER IN INCHES 0.840"..
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE..
ADJUSTS 7 PSI TO 175 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT..
REPLACEMENT FILTER ELEMENT AMAZON ASIN B01N7VEJ2V. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR..

Max. Supply Pressure: 250 PSI/ Max. Operating Pressure: 0-150 PSI.
SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 17 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/8" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

...25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM of Water @ 20 Ft. of Head: 50 Shaft Seal Material – Pump....

Max. Supply Pressure: 250 PSI/ Max. Operating Pressure: 0-150 PSI.
SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
Auto Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2″ NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

Max. Supply Pressure: 250 PSI/ Max. Operating Pressure: 0-150 PSI.
SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4″ NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

Max. Supply Pressure: 250 PSI/ Max. Operating Pressure: 0-150 PSI.
SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..