Reviews Sight Glass Filter

Hayward SP0714T VariFlo Top-Mount Multiport Valve, Black

Seven position control valve is compatible with any above-ground Pro- or VL Series Sand Filter..
Sight glass allows you to see when the water is clean and the backwash cycle is complete.
Designed with heavy-duty stainless steel and ABS components to assure maximum quality.
Features easy to use lever-action handle.

185 CFM Flow Rate 1" FPT Air Inlet port 1" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.

185 CFM Flow Rate 3/4" FPT Air Inlet port 3/4" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.

In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal position.
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

In-light Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal....
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

Sight glass to easily view refrigerant movement and condition during charging and recovery.
Exclusive 100-mesh filter in-line on all flare fittings helps keep out particulate material and extend the life of the seat.
Front access for easy field recalibration double “O” ring piston for reliability and long service life.

Industrial performance delivers maximum CFM @ 175 PSI.
provides enough power to operate more than one air tool or Device at one time.
Patented Pump design provides for a cooler Running Pump: industrial style air intake filter.
easily Accessible Oil level sight glass and Oil drain with 4” extension.
Electric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required.
Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps.
Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling.

【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 3/4" NPT Fittings, 1 ....

【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x....