Reviews Sight For Glock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

3D Metal Rear Slide Cover Back Plate for Gen 1/2/3/4/5 Glock 9mm/10mm/.40/.45/.357/.380/.22lr Magazine Accessories, Black Skull Red Eyes

  • Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom micro red dot sight.
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot).
  • Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
  • Attaches firmly to your firearm for sure performance in tactical situations.
Check Stock

PTOUGE Glock Tool Kit, Front Sight Tool, Magazine Disassembly Tool Pin Punch Tool for Glock 19 26 27 43 Accessories (Glock Tool kit)

  • Magazine Disassembly Tool: Removal and installation of Glock front sights.
  • Front Sight Installation Hex Tool to aid in the installation and removal of front sights on Glock pistols.
  • Pin Punch Tool is a disassembly tool for removing pins on all Glock pistols.
  • Made of durable metal, Tool set compatible with Glock: Magazine Disassembly / Front Sight Installation Hex Tool / Disassembly Tool.
  • Tool Kit Compatible with Standard Glock 9/40mm, Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41ect. Please note: The Tool kit does not work on the Glock 30 round magazines or extended type base plates..
Check Stock

XS SIGHTS Glock Sight Pusher Tool, Inline Rear Sight Pusher Install Kit, Compatible with All OEM Glock Slides, DIY Series

  • FITS ALL OEM GLOCK SLIDES: Compatible with all Glocks and optic/suppressor height sights.
  • Can also be used for sight installation or windage adjustment on sights with an optic mounted on the pistol.
  • ALL-IN-ONE-KIT: Includes Inline Rear Sight Pusher for Glock Pistols.
  • Lucas Oil Products Extreme Duty Gun Oil (0.135 FL. OZ. / 4ml).
  • Vibra-Tite 131 High Strength Threadlocker (0.06 FL. OZ. / 1.8ml).
  • LIGHTWEIGHT & COMPACT: Lightweight aluminum and compact design makes it easy to carry and use on the go or at the range for sight adjustments.
  • SUPERIOR CRAFTSMANSHIP: Non-marring brass bit prevents any scratching of sights or slides.
  • Built-in centering scale with a 1/16" scale ensures precise sight adjustments.
  • EASY TO INSTALL & MAINTAIN: Tool lifespan up to 50-100 installations with proper care and maintenance.
  • With no need for pads, springs, or knob tightening, our kit helps you get the job done with just simple physics.
Check Stock

Real Avid Universal Glock Sight Pusher | Front and Rear Sight Tool for Glock 19, 17, 43, 26, 22, 48 & More | Pistol Sight Pusher Tool for Adjusting Dovetail Sights on Most Glock Sight Styles

  • PRECISION sight pusher tool for handguns to push, change, install and adjusts press fit dovetail front and rear sights on most Glocks.
  • COMPATIBLE with Glock Models including 19, 21, 17, 43, 26, 22, 48 & more.
  • SLIDE locking base fits subcompact, compact, standard and competition Glock slides.
  • INCLUDES: the 2-IN-1 Tool for Glock which stores securely in the handle. This tool includes a pin punch for disassembly and maintenance and a 3/16” nut driver for changing Glock front sights..
  • EASILY and safely change press-fit sights on Glocks in 3 easy steps. Fits most Glock sight styles.
  • See instruction sheet for compatibility chart..
Check Stock

ATG Patch and NcSTAR Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher + Glock Tool (Ultimate Tool Kit)

  • Compatible with Glock 19,17, 43, 26, 22, 48, 27, 45, 21, 42, 30, 34, 20, 44 and more.
  • Rear sight pusher will work with 90 degree and 30 degree rear sight profiles.
  • Both side witness windows tool frame to check sight alignment.
  • Sight Glock tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice.
  • Heavy duty Blue Anodized aluminum frame with steel tools.
Check Stock

Glock Suppressor Height Sights Fits Glock 48, 43 & 43X Tall Suppressor Height Sights Red Dot Co-Witness MOS Compatible

  • Versatility & Durability: Use in mid to high-light situations as your back up sights.
  • Much stronger than any other plastic Glock sights set.
  • V-Shape Sight Picture: Tyrant Designs suppressor height sights co-witness and offer a unique v shape sight picture helps narrow shot placements to the tiniest groupings.
  • Light Deflection: Chevron “v” stye serrations help deflect light at 45 degree angles instead of just one direction like other Glock sights.
  • Strong: Precision machined from aerospace grade aluminum for maximum durability and usability.
  • Tyrant's Glock sights are manufactured to last a lifetime.
Check Stock

Sylvan Universal Sight Push Tool PURSHER for Handguns Pistols Front OR Rear 1911, Glock, ETC. (All Blocks Included)

  • The Sylvan Arms Gen 4 Standard Sight Pusher is now here and it comes with massive upgrades!.
  • Originally released in 2014, the new 2018 Gen 4 Standard Sight Pusher is our largest and most advanced sight pusher tool yet. Designed to be universal, it can adjust, remove, push, and replace sights on any pistol, of any make or model..
  • This is the only sight pusher tool that works on “snake eye” type sights out on the market..
  • The Gen 4 Standard Sight Pusher has a 9310 steel frame, 6061 Aluminum blocks with two distinct precision CNC machined pusher blocks (one standards and one specialized for “snake eye” or “ringer” type sights), padded carry case, Glock disassembly tool, and Glock front sight removal tool. The Sylvan Arms Gen 2 Standard Sight Pusher package is the most complete sight pusher package available in its price range..
  • This just released 2018 Gen 4 model sports a strong, thick 9310 steel frame, and is designed to install, uninstall, and adjust front and rear dovetail sights. It works with 99% of all handguns..
Check Stock