Reviews Short Mounting Bolt

Aoneky Outdoor Replacement Basketball Rim - 18 mm Solid Steel

This is not a break-away rim! It is a very heavy solid stationary rim and usually only fit the largest basketball court rims, compatible with 5x5in, 5x4.5in, 5x4in, 5x3.5in, 5x3in, 4x3in mounting bolt pattern, not for kids backboard or other bolt pattern, please make sure it works with your bolt pattern(Refer to the left mounting hole dimensions image)in your backboard if you want to install it in other backboard not mentioned in this detail page.
18 mm all solid steel heavy duty basketball rim.
18'' Diameter, 5.5''braces regulation basketball rim.
Orange powder-coated finish, build for long time using.

1/2 HORSEPOWER MOTOR: The Waste Maid garbage disposer features a 1/2 horsepower 2600 RPM permanent magnet motor allowing the disposer to come to full power on the initial rotation.
TORQUE MASTER GRINDING SYSTEM: Anti-jam Torque Master stainless steel grinding system delivers maximum torque for cutting through waste and a durable turntable with balanced impellers for less vibration, quieter operation, and longer life.
CONTINUOUS FEED OPERATION: Continuous feed garbage disposals let you add food waste into the disposal even while it is running. It is recommended to run water while the disposal is in operation.
EASY 3-BOLT MOUNTING: A standard 3-bolt mounting system makes for fast installation and direct replacement for most garbage disposal brands using 3-bolt mounting systems.
WHAT’S INCLUDED: Attached power cord, removable splash guard, stopper, and dishwasher connection.

1/2 HORSEPOWER MOTOR: The Waste Maid garbage disposer features a 1/2 horsepower 2600 RPM permanent magnet motor allowing the disposer to come to full power on the initial rotation.
TORQUE MASTER GRINDING SYSTEM: Anti-jam Torque Master stainless steel grinding system delivers maximum torque for cutting through waste and a durable turntable with balanced impellers for less vibration, quieter operation, and longer life.
CONTINUOUS FEED OPERATION: Continuous feed garbage disposals let you add food waste into the disposal even while it is running. It is recommended to run water while the disposal is in operation.
EASY 3-BOLT MOUNTING: A standard 3-bolt mounting system makes for fast installation and direct replacement for most garbage disposal brands using 3-bolt mounting systems.
WHAT’S INCLUDED: Attached power cord, removable splash guard, stopper, and dishwasher connection.

50:1 Gear Ratio, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available..
UNIVERSAL FIT for Dump Bodies up to 28 feet. Dump Truck Tarp Motor has a 3/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems..
Output shaft is 3/4 inches thick and 3-3/4 inches long with a 5/16" hole drilled at 1 inch and at 2 inches for best fit..
INCLUDES reflective chrome housing, all necessary mounting hardware, and 3-Year warranty.
3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge..

3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge..
50:1 GEAR RATIO, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available..
UNIVERSAL FIT FOR DUMP BODIES UP TO 28 FEET. Dump Truck Tarp Motor has a 3/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems..
INCLUDES REFLECTIVE CHROME MOTOR COVER, all necessary mounting hardware, and 3-Year warranty.
OUTPUT SHAFT is 3/4 inches thick and 3-3/4 inches long with a 5/16" hole drilled at 1 inch and at 2 inches for best fit..

3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
Four mounting slots for proper fit and alignment of closet bolts to the toilet.

...ork with our Quick Release Products, The short hubs are designed to utilize one piece solid construction for the maxim in durability and usability.
【Features】A steering shaft hub for use with a lockable steering wheel quick-release unit, featuring the shortest possible mounting surface while still retaining the ability to use your horn and turn signals about 99% of the time.
【Note】 Professional Installation is Highly Recommended, Installation Instruction is NOT Included.
【This Item Includes】1 X Racing Style 6 X 70mm Bolt Steering Wheel Short Hub Adapter.

The smoke stack height is about 14 inches, fit the Traeger, Pit Boss, Camp Chef and many others.
15 Gauge Black Powder Coated Steel with Umbrella.
Includes Felt Heat Resistant Gasket, Please double check your mounting bolt distance to be sure.

... not need to calibrate the laser next time..
◇Ambidextrous steady ON/OFF swithes with strobe LED mode,No matter using left hand or right hand,the laser sight can be conveniently operated. Turn on both of laser light combo can work up to 90 minutes orso,just laser-8 hours orso,just flashlight-2 hours orso..
◇Three Mounting Slots make it easy to suit most of short and long guns,you can use this laser sight for pistol and handguns or rifles,so long as they have a standard picatinny rail with a Min 30mm fit space from the mounting screw bolt to the trigger guard,just need to change the screw bolt to the proper slot postion and tighten it will be fine..