Reviews Shore Indentation Hardness

Polytek 75-60 Liquid Polyurethane Rubber (4lb Kit)

[Size] - 40mm Outside Diameter, 32mm Inner Diameter, 4mm Cross-Section Diameter.
[Hardness] - 70A Durometer (Shore Hardness) for resistance to penetration.
[Nitrile Rubber] - Standard Nitrile Butadiene Rubber with a wide temperature range from -4℉ (-20°C) to 212℉ (100°C).
[Application] - Widely used for pressure washer, filter, pump, water hose, plumbing pipe, maintenance and much more.
[NOTE] - Please confirm the required size and material before purchase, and put it in the right place.

Pot Life: 45 minutes – Cure Time: 4 hours.
Please know that ‘Liquid Rubber’ is the same as ‘Pourable Silicon Rubber’.
Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion..

Makes strong mechanical bonds to a wide variety of materials, including: UHMW, Delrin, etched Teflon, metals, and most polymers..
Self-leveling , ~9000cps @ ambient, thixitropic (will not run on vertical surface) easy to dispense and apply..
Flexible two-part epoxy (75-80 Shore A hardness), 2:1 ratio, 130% elasticity..
Thermal stability of -50°F to +300°F. Offers good corrosion/chemical resistance. 100% waterproof..
NSN (National Stock Number) 8040-01-582-8097, and Cage Code 3DG02..

Platinum cured medical grade pure silicone.
Maximum transparency, maximum tear resistance and yield strength..
Remains pliable under extreme cold and usable under extreme heat conditions..
Fluid transfer, oxygen lines, lab work use. Not intended for peristaltic pump applications..

Makes strong mechanical bonds to a wide variety of materials, including: UHMW, Delrin, etched Teflon, metals, and most polymers..
Self-leveling , ~9000cps @ ambient, thixitropic (will not run on vertical surface) easy to dispense and apply..
Flexible two-part epoxy (75-80 Shore A hardness), 2:1 ratio, 130% elasticity..
Thermal stability of -50°F to +300°F. Offers good corrosion/chemical resistance. 100% waterproof..
NSN (National Stock Number) 8040-01-582-8097, and Cage Code 3DG02..

Price For: Each Hardness: Shore A: 61 Tolerance: - Item: Tubing Length: 50 ft. Temp. Range (F): -75 To 275 Outer Jacket Thickness: - Type: Norprene(R), A-60-G Inside Dia.: 1/8" Outside Dia.: 1/4" Wall Thickness: 1/16" Max. Pressure (PSI): 19 psi @ 73 Degrees F Burst Pressure (PSI): 95 psi Vacuum Rating (Inches Hg): 29.9 in. Hg. Color: Black.
Material: Thermoplastic Elastomer Country of Origin (subject to change): United States.

EASY TO USE - The Steady Pad is perfectly suitable for various car bodies and jacks (e.g. Unitec, Michelin etc.) The application is quick, uncomplicated, slip-proof and accurate!.
REAL QUALITY - Due to our special rubber compound, you will enjoy our product for years. Choose premium protection..
PRODUCT PROPERTIES - Material: Very robust NR/SBR rubber (80 Shore A) // Dimensions: Diameter top = 65mm , Diameter bottom (attachment for jack) = 38mm, // Suitable for cars up to 3.5T. // IMPORTANT: Before buying, check the dimensions of your car and jack and compare them with the dimensions in picture 4..
PROTECTION & SAFETY - No compromise in the protection of your car! Your car is protected against slipping. The indentation on the underside of the rubber buffer ensures a stable hold on the jack plate..
10 YEARS WARRANTY - We are 100% convinced of our product! That is why we offer you a ten-year guarantee. Our customer service will also be happy to advise you. Convince yourself!.