Reviews Shocks For Slash 4x4

HobbyPark Aluminum Front & Rear Shock Absorber Assembled Full Metal for RC 1/10 Traxxas Slash, Stampede, Rustler, Nitro Slash, Replacement of Parts 5862 3760 3762 (Navy Blue)

  • ✔Compatible with:1/10 Scale Traxxas Slash 4x4, Slash 2WD, Stampede 4x4, Stampede 2WD, Rustler 4X4 VXL, Rustler 2WD, Ford F-150 Raptor, Nitro Slash, Nitro Rustler, etc.
  • ✔2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862 3760 3762.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

AIYIHOBBY Metal Steel 6878 Differential Gear Complete Slipper Clutch and 32P 15T/17T/19T Pinions Gear Set for Traxxas Slash 4X4 / Stampede 4X4 / Rustle 4X4 Replace 6878

  • 【Compatible with】Compatible with Traxxas Rustler 4X4 / Slash 4X4 Platinum / Slash 4X4 Ultimate / Slash 4X4 VXL / Slash 4X4 / Stampede 4X4....
  • 【54T Spur gear size】6878 metal differential is 32P 54T 0.8 metric pitch..
  • 【32P pinions size】3 pinions(32P 15T/17T/19T pinions) Inner diameter: 5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures....
  • 【Hardened gears kit 】suitable for traxxa slash 4x4 slipper clutch is all metal internal gears for strength.Made of heavy duty hardened steel, long....
  • 【Free Style】The speed depends on your gear ration. We provide three different teeth pinion gear to make you more choice in gear ration..
Check Stock

RC-Hub 1Pcs RC Driveshafts Metal Drive Shaft 55-67mm for 1:14 Tamiya Trailer Tractor Truck RC Crawler Car

  • Drive shafts for slash 4x4 1/10 scale Traxxas Slash Platinum/Slash Ultimate/Rustler VXL 4X4/Stampede VXL 4X4/Hoss VXL 4X4/Slash VXL 4x4 parts RC Car.rustler 4x4 drive shaft..
  • Slash 4x4 axles is builtin antiseparation design reduces the failure rate, high performance, and increases the smoothness and angle of remote control car..
  • Compatible with traxxas 4x4 vxl drive shaft is with more turning power and more sturdy use.High reliability, ensuring smooth transmission..
  • Fits for traxxas drive shafts made of high-quality metal materials middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
  • RC cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check Stock

FriHobby RC Shocks Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 2WD/4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 (Gray)

  • Compatible with:1/10 Traxxas Slash 2WD&4x4, Stampede 2WD&4x4, Rustler 2WD&4x4 VXL, Hoss 4X4 VXL, Ford F-150, Bandit RC Trucks..
  • The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 shocks Rustler 4X4 shocks Stampede 4X4 shocks Hoss 4X4 Replace 5862 (Blue)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

FriHobby RC Shocks Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 2WD/4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 2WD&4x4, Stampede 2WD&4x4, Rustler 2WD&4x4 VXL, Hoss 4X4 VXL, Ford F-150, Bandit RC Trucks..
  • The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

Globact All Metal Steel 6878 Differential Gear Slipper Clutch and 32P 15T/17T/19T Pinions Gear Set for Traxxas Slash 4X4 / Stampede 4X4 / Rustler 4X4 Replace 6878

  • Compatible with Traxxas Rustler 4X4 / Slash 4X4 Platinum / Slash 4X4 Ultimate / Slash 4X4 VXL / Slash 4X4 / Stampede 4X4 Unassembled Kit / Stampede....
  • 6878 Slipper clutch spur gear is 32P 54T 0.8 metric pitch..
  • 3 pinions(32P 15T/17T/19T pinions) Inner diameter: 5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to 3.175mm/0.125inch.....
  • All metal internal gears for strength.Made of heavy duty hardened steel, long time life span..
  • The speed depends on your gear ration. We provide three different teeth pinion gear to make you more choice in gear ration..
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 Upgrade Parts RC Car Replace 5862 (Titanium Color)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

Hobbypark Front & Rear Aluminum Suspension Arms Set and Full Metal Shock Absorber Assembled for 1/10 Traxxas Slash 4x4 Hop-ups,Replacement of 3655x 5862 (Navy Blue)

  • ✔Compatible with: Traxxas Slash 4X4 1/10 Scale 4WD Short Course Truck,Replace 3655x 5862,Consult your user's manual for exact parts listings..
  • ✔Attention pls: The shocks come with Just Little for testing purpose,for high performance, make sure you get some before installing.
  • ✔Anodized 6061-T6 aluminum, CNC machined for Lightweight and Durable performance..
  • ✔Package include: Front shocks (2),Rear shocks(2),Front Susp A-Arms (2),Rear Susp A-Arms(2).
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.Buy with Confidence,Friendly Customer Service.
Check Stock