Reviews Sheetrock Screws For Metal Studs

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • ...hors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
  • A Hold You Can Trust - The CondoMounts anchor channel will not rotate when installing the bolt, whether installing by hand or with a drill driver, and will stay in place if the bolt is removed to facilitate fixture and screw changes..
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

Link2Home Premium Tilting TV Wall Mount Up to 90-inch for Flat and Curved TVs, Mount on Any Wall, No Studs Required, Hold up to 150 lbs., VESA Pattern 100/600, Tilt 12 Degrees

  • TILT TV WALL MOUNT: TV Bracket fits 26” to 90” screens and can hold up to 150 pounds. Designed to work with any TV style such as curved screens, OLED, and QLED. Low profile of 2.95” provides sleek look..
  • CUSTOMIZED VIEWING EXPERIENCE: Bracket tilts range +4° to -12°. Reduce glare and comfortably watch movies and sports games with family and friends. Ideal for living rooms, home entertainment centers, bedrooms, and offices..
  • VESA: Compatible with VESA 100x100 mm to 600x600mm mounting holes. VESA mounting patterns are the distances (in mm) between the four screw holes on the back of the.
  • HIGH-QUALITY DESIGN: Lifetime Warranty. Features auto-locking safety mechanism which safely and securely holds your TV without the use of pull tabs, screws, or strips..
  • NO-STUD REQUIRED: Wall studs not required for installation of TV Mount. Save time by not having to look for studs in your wall. Can be mounted on wood, brick, and concrete walls and directly on the sheetrock/plaster walls with no stud required..
Check Stock

Link2Home Fixed TV Wall Mount up to 57 inch, Mount Directly on Sheetrock or Plasterboard Walls, No Studs Required, Up to 88 lbs. VESA 100/400, fits LED, LCD, OLED, Flat and Curved TVs, Black Aluminum

  • NO-STUD REQUIRED: Wall studs not required for installation of TV Mount. Save time by not having to look for studs in your wall. Can be mounted on sheetrock with nails only, or on wood, metal studs, brick, and concrete walls. (Drywall thickness must be greater than 0.4”.).
  • TV COMPATIBILITY: TV Bracket fits 20” to 57” screens with VESA 100x100 mm to 400x400mm mounting holes. VESA mounting patterns are the distances (in mm) between the four screw holes on the back of the TV, can hold up to 88 pounds in dry wall and 110 pounds in wood or concrete block..
  • LOW PROFILE TV WALL MOUNT : TV bracket extends only 0.83 inches from the wall for a sleek appearance. Perfect for bedrooms, living rooms and offices..
  • SOLID ALUMINUM CONSTRUCTION: This reliable mount has been 4 times strength tested to support up to 88 pounds. Includes Auto Lock Mechanism for a secure hold to keep your tv safe..
  • QUICK INSTALLATION: Installs quickly under 10 minutes with nails and won’t damage walls. Built-in bubble level and all mounting hardware included for easy installation..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock

3/4 Inch #6 Coarse Thread Drywall Screw, Sharp Point, Black, 2 Bugle Head Phillips Drive, 1 Lb. Ideal Screw for Drywall Sheetrock, Wood, and More, 400 Screws

  • For attaching drywall to wood studs, wood to wood and more, Can be ideal for your home, office, or workplace.
  • Black coarse thread, sharp point, Screws come in sturdy cardboard box, Phillips drive flat head, durable strong metal steel screws.
  • Coarse drywall screws feature coarse threads to secure gypsum board to studs.
  • They have a sharp point to pierce through drywall, and a coarse thread design to help grab into wood studs. Once the screw has been driven, the bugle head allows for quick and easy countersinking.
  • Recommended by Builders, DIY homeowners and Professional Contractors.
Check Stock

Drywall Nails, Diamond Point, Annular Threaded, 1-5/8”

  • Ringed shanked for greater holding power.
  • Diamond point ring shank tip to help ease drivability and holding power.
  • Used for attaching gypsum wallboard, sheetrock to wood studs.
  • Sturdy and secure construction, Perfect for your household.
Check Stock

Bestar 90“ Queen Wall Bed kit - Pur

  • NOTE: For installation and to avoid risk of injury, use only a professional or qualified person with knowledge of the wall structure, studs, and components. Bed may be attached to wood studs, metal studs, or masonry wall structures.
  • masonry requires use of concrete screws (not provided)..
  • The collection brings multi functionality to a single room..
  • The kit comprises a queen wall bed and a 25“ storage unit..
  • The mechanism provides simplified assembly of the Wall Bed..
  • Increased comfort due to Euroslat mattress support system..
Check Stock

Magnet Stud Finder Tool,Magnetic Stud Finder with 30 Pounds of Pull Magnetic Power,No Batteries Required Metal Detected and Located Through 5/8″ Drywall,Wood or 3/4″ Plywood Paneling, Ceramic Tiling

  • ...n easily solve this problem. This stud finder is very easy to use, does not require batteries, and can find nail locations quickly and accurately, saving a lot of tedious work..
  • Strong Magnetic Force: This stud finder wall scanner has 30 pounds of pulling force and 8000Gs of magnetic force to effectively find nails, screws, and metal studs on the wall. Since our stud magnet has a strong magnetic force, you can also put some metal tools on it during your work, such as nails, screws, etc. The magnetic stud finder is small, easy to put in your pocket or tool bag, easy to carry, sturdy and durable..
  • Replace the Electronic One: compared with the electronic wall scanner, this wall stud finder is easy to use as it does not need batteries, no need to read the manual, and no need to worry about electronic failure. Without any marking or reading data on the wall, it can be directly positioned and fixed in the exact location in a very short time to improve work efficiency..
  • Powerful Features: This magnet stud finder tool is great for hanging picture frames, TVs, mirrors and other things that need to be firmly mounted on wooden brackets or metal studs and is designed for users such as renovation, DIY and professionals. This stud finder magnet works on a variety of ....
Check Stock