Reviews Sheave Wheel

Polaris Snowmobile Quick Drive Belt Kit, Part 2206046

The ROP Shop replacement 103 HPQ Drive Clutch.
Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.

Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).

SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 10 Feet, Head Room of 12" inch and Load Chain Diameter of 6mm at a MAX weight capacity of 1 TON 2200LBS (1000Kg) of working load capacity.
RESILIENT - Heavy duty 20MN2 Alloy Steel Chain and milled steel gears are black oxide finished, heat-treated cold rolled forged.
Precision machined load sheave chain pockets using Roller Bearings and Friction Discs for smooth operation and increased efficiency.
QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.16 and ASME HST-2 standards.
Our compact design requires low headroom.
Our hoists use load sharing gears, making heavy loads easy.
SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
Do NOT use our hoists for non-recommended applications.
The ergonomic rubber hand grip provides better comfort and security.
BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
Included is a handy storage bag and shoulder strap for easy carry.

SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 10 Feet, Head Room of 11" inch and Load Chain Diameter of 5mm at a MAX weight capacity of 1/2 TON 1100LBS (500Kg) of working load capacity.
RESILIENT - Heavy duty 20MN2 Alloy Steel Chain and milled steel gears are black oxide finished, heat-treated cold rolled forged.
Precision machined load sheave chain pockets using Roller Bearings and Friction Discs for smooth operation and increased efficiency.
QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.16 and ASME HST-2 standards.
Our compact design requires low headroom.
Our hoists use load sharing gears, making heavy loads easy.
SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
Do NOT use our hoists for non-recommended applications.
The ergonomic rubber hand grip provides better comfort and security.
BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
Included is a handy storage bag and shoulder strap for easy carry.

...or you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a crevasse, etc..

...ke general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a crevasse, etc..