Reviews Sheave Blocks With Hook

US Cargo Control 4190 Snatch Block with Shackle (3/8 Inch Wire x 3 Inch Sheave)

Very high efficiency single pulley with one-way rotation and swivel.
Designed to be used in conjunction with a descender for maximum simplicity when setting up a heavy load deviation or haul systems for work at height or rescue.
Optimal hauling efficiency and lowering convenience: the faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering heavy loads.
Easy handling: swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers..
Sheave diameter: 40 mm maximum usage load: 3 x 2 = 6 kN.

Quality-manufactured pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system..
Sheave of 2.24 inches Dia, pulley with large sheave is much better and easier for hauling big load..
Mounted with ball bearing for higher efficiency and smoothness! Swing side for easy and rapid rope installation and removal!.
CE / UIAA Certification! Rating to 32kN / 7100lbs for high durability to satisfy all your requirements, like pulling a stranded boat, hauling some out of a crevasse, etc..
Compatible with wide range of ropes, up to 16mm (5/8")! Multiple anchors for complex rescue / hauling system setup!.

The ROP Shop replacement 103 HPQ Drive Clutch.
Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.

Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).