Reviews Sheave Bearing

VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery

4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
360° Rotation: Adopt a one-piece casting process.
the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..

Very high efficiency single pulley with one-way rotation and swivel.
Designed to be used in conjunction with a descender for maximum simplicity when setting up a heavy load deviation or haul systems for work at height or rescue.
Optimal hauling efficiency and lowering convenience: the faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering heavy loads.
Easy handling: swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers..
Sheave diameter: 40 mm maximum usage load: 3 x 2 = 6 kN.

?Material: 304 stainless steel H-shaped sheave with good corrosion resistance, heat resistance, low temperature strength and high mechanical properties. The sturdy structure and gasket are very strong..
?Features: thick steel plate bracket, high bearing capacity, good toughness, good wear resistance and good chemical stability. Smooth surface, double carbon steel ball bearings reduce vibration and noise..
? Strong carrying capacity: heavy caster design. The maximum load per wheel is 500KG / 1102 lbs..
?Easy to use: It can reduce friction with the wheel, and it is more stable and flexible, and has excellent maneuverability..
? Wide range of uses: H-shaped sheaves are suitable for square tubes, I-beams, door frames, movable doors, fitness equipment, electric/rolling doors, industrial machinery, containers, shelves and other equipment and engineering..

?Material: 304 stainless steel H-shaped sheave with good corrosion resistance, heat resistance, low temperature strength and high mechanical properties. The sturdy structure and gasket are very strong..
?Features: thick steel plate bracket, high bearing capacity, good toughness, good wear resistance and good chemical stability. Smooth surface, double carbon steel ball bearings reduce vibration and noise..
? Strong carrying capacity: heavy caster design. The maximum load per wheel is 500KG / 1102 lbs..
?Easy to use: It can reduce friction with the wheel, and it is more stable and flexible, and has excellent maneuverability..
? Wide range of uses: H-shaped sheaves are suitable for square tubes, I-beams, door frames, movable doors, fitness equipment, electric/rolling doors, industrial machinery, containers, shelves and other equipment and engineering..

The ROP Shop replacement 103 HPQ Drive Clutch.
Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.

Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).