Reviews Sgs Solder Bar

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

  • 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
  • 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
  • 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
  • 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
  • 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock

Wirefy Heat Shrink Wire Connectors Kit - Marine Grade Electrical Connectors - Automotive Butt Connectors - Insulated Ring, Spade, Fork, Hook, T-Tap Crimp Terminals - 22-10 Gauge - 1080 PCS

  • WIREFY ULTIMATE CONNECTOR KIT - Ring, fork, hook, spade and butt, solder seal and T-Tap heat shrink wire connectors are included in this multipurpose electrical connector kit. You will find the right connector type for your next wiring project..
  • EXCELLENT WIRE CONTACT - Brazed copper barrels provide increased current flow, and ensure less voltage drop, preventing wiring failures and reducing equipment downtime..
  • PROFESSIONAL HEAT SHRINK TUBING - Shrinks to 1/3 of its original size, and has heat activated adhesive that bonds the connector to the wire..
  • COMPLIANT WITH ALL ELECTRICAL STANDARDS - Wirefy heat shrink connectors are compliant with ROHS, ISO 9001:2008, SGS, CE and UL standards. Prevent wiring failures and reduce equipment downtime by choosing certified electrical connectors..
  • WIREFY QUALITY COMMITMENT - We stand behind the quality of our electrical connectors. All Wirefy electrical wire connectors are backed by our best-in-class, lifetime warranty..
Check Stock

Heat Shrink Butt Connectors Insulated Waterproof Wire Connector Terminals 200 PCS Electrical Connectors Kit Marine Automotive Wire Crimp Terminals Butt Splice Set 3 Colors 10-12 14-16 18-22 AWG

  • TOP QUALITY - ombination of tinned copper butt splice and polyolefin tube ensures secure crimping, prevents wiring failures, ensures high current flow and minimal voltage drop.
  • SAFETY STANDARDS - Our heat shrink butt connectors comply with the CE, RoHS, and SGS standards. Their maximum isolation and durability allow heat shrink solder connectors to be used on a boat, in automotive, or any electrical DIY wire connecting project.
  • EXTRA DURABLE - Seamless tinned copper barrel prevents the barrel from opening and any slippage of butt connectors. Polyethylene heat shrink tubes provide high tensile strength and resistance to mechanical damage.
  • 3 SIZES - 200 piece electrical connectors kit consists of 3 sizes, easily identified by the wire connector terminals or by the color of wire splice connectors. + 30 ZIP TIES included.
  • INSULATED TUBING - When heated, polyolefin and adhesive inside ensure 3:1 shrinkage, creating a solid, waterproof seal to prevent wire corrosion.
Check Stock

Stahl Tools SSVT Variable Temperature Soldering Station

  • [HIGH PRECISION & LARGE POWER]: The solder station has large power and high precision. Power: 60 watts, temperature adjustment range: 194°F 896°F / 90°C 480°C, temperature stability: ±2°F / ±1°C. It’s fast heating up and takes only 6 seconds to reach the melting point of 392°F solder wire. It’s perfect welding equipment..
  • [FEATURES]: Anti-static design & ESD safe, LED display, PID temperature control technology, fast heating, sleep mode & wake function, °C/°F conversion function, indicator for tracking temperature and temperature compensation, digital temperature correction, reusable ceramic core. Ergonomic solder iron handle..
  • [LONG WORKING LIFE]: Protective cord shield, silicone heat shield, and reusable soldering iron extend the service life. Internal 60 watts thermal ceramic soldering iron heater, welded firmly, long service life, easy to replace and purchase. Stainless steel soldering iron prevents accelerate aging of materials for high temperature work, improve heat dissipation and prolong heater life..
  • [SOLDERING KIT INCLUDED]:60-watt digital soldering station with side-mounted solder roller holder (removable), built-in soldering iron holder to ensure soldering iron safety, cleaning Sponge to remove solder residue for future use, 2....
Check Stock

Ultra-Thin Solder Wire 0.01in (0.3mm) Rosin Core Flux 2.5, Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 Flow 50g Electronics Soldering Electric Solder

  • ULTRA-THIN- the solder wire diameter is just 0.01inch, designed to solder the tiny component, just enough to add enough solder on those small MSD pads.
  • LOW MELTING POINT- solder fast melting at 419F ( 217 Deg.C), suitable all soldering tools.
  • IMPROVED SOLDER- this 0.3mm solder wire content high quality allow Sn99 Ag0.3 Cu0.7, provides excellent conductivity, eliminate soldering issue, reduce labor cost.
  • APPLICATION- good for fine solder work, soldering for electronics equipment.
  • LEAD FREE- Unlead solder, excellent performance for electric soldering project.
Check Stock

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

DICTAC Grey Leather Bar Stools Set of 2 Adjustable Bar Chairs Counter Height Swivel Barstools for Kitchen Capacity 400lbs

  • ...ter long-term use. The seat surface size is: 18.11" x 15.7", and the wide seat bar chair provides you with maximum comfort , Sedentary is not tired..
  • 【High Quality Material】The bar stool seat is made of vintage brown leather, which is durable and easy to clean. The bar chair lift rod has passed the international SGS safety certification, the chassis is made of high-quality steel, and the bearing capacity can reach 400LBS..
  • 【Adjustable Height】The seat surface of the bar chair can be raised and lowered from 24.6" to 32.5", which can be used with various tables or as a game chair. The bar chair can be freely rotated 360°, and the sitting posture can be changed at will..
  • 【Ergonomics】The height of the backrest of the bar stool is 9.9", which is in line with the ergonomic height design. The height of the backrest can well support the stress-bearing parts of the spine, bringing you a comfortable leaning experience..
  • 【More Stable】The enlarged diameter of the chassis is 16.3", which makes the bar chair more stable and will not tilt. The base has a non-slip rubber ring to protect the floor from scratches..
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

MG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool

  • Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more.
  • Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed.
  • Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
  • With the solder wire reel, soldering can be accomplished quickly..
  • Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
  • Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check Stock