Reviews Servo To Ttl Board

Canon EOS 6D Mark II DSLR Camera + Canon EF 24-105mm f/4L is II USM Lens + Fully Dedicated TTL Flash + 64Gb SDXC Card + 57 Inch Monopod + FB-150 Flash Bracket + Backpack Case (21 Items kit)

  • ...with 1-year Seller Warranty and includes:.
  • Canon EOS 6D Mark II - 26.2MP Full-Frame CMOS Sensor - DIGIC 7 Image Processor - 45-Point All-Cross Type AF System - Full HD Video at 60 fps.
  • Digital IS - 3" 1.04m-Dot Vari-Angle Touchscreen LCD - Dual Pixel CMOS AF and Movie Servo AF - Native ISO 40000, Expanded to ISO 102400 - 6.5 fps Shooting.
  • Time-Lapse & HDR Movie - Built-In GPS, Bluetooth, & Wi-Fi w/ NFC. Optical viewfinder offers approximately 98% coverage of the frame and has a magnification of 0.71x..
  • Canon EF 24-105mm f/4L IS II USM Lens - EF-Mount L-Series Lens/Full-Frame Format - Aperture Range: f/4 to 22 - Four GMo Aspherical Elements - Air Sphere Coating - Ring-Type Ultrasonic Motor AF System - Optical Image Stabilization - Internal Focus.
  • Full-Time MF Override - Zoom Lock Switch.
  • Fluorine Coating - Dust- and Water-Resistant Construction - Rounded 10-Blade Diaphragm. Constant f/4 maximum aperture offers consistent performance and light transmission throughout the zoom range..
  • SanDisk 64GB Ultra Class 10 SDXC UHS-I Memory Card - Great choice for compact to mid-range point and shoot camera - Twice As Fast A....
Check Stock

Canon EOS 6D Mark II DSLR Camera + Canon EF 24-105mm f/4L is II USM Lens + Fully Dedicated TTL Flash + 64Gb SDXC Card + 57 Inch Monopod + FB-150 Flash Bracket + Backpack Case (21 Items kit) (Renewed)

  • ...with 1-year Seller Warranty and includes:.
  • Canon EOS 6D Mark II - 26.2MP Full-Frame CMOS Sensor - DIGIC 7 Image Processor - 45-Point All-Cross Type AF System - Full HD Video at 60 fps.
  • Digital IS - 3" 1.04m-Dot Vari-Angle Touchscreen LCD - Dual Pixel CMOS AF and Movie Servo AF - Native ISO 40000, Expanded to ISO 102400 - 6.5 fps Shooting.
  • Time-Lapse & HDR Movie - Built-In GPS, Bluetooth, & Wi-Fi w/ NFC. Optical viewfinder offers approximately 98% coverage of the frame and has a magnification of 0.71x..
  • Canon EF 24-105mm f/4L IS II USM Lens - EF-Mount L-Series Lens/Full-Frame Format - Aperture Range: f/4 to 22 - Four GMo Aspherical Elements - Air Sphere Coating - Ring-Type Ultrasonic Motor AF System - Optical Image Stabilization - Internal Focus.
  • Full-Time MF Override - Zoom Lock Switch.
  • Fluorine Coating - Dust- and Water-Resistant Construction - Rounded 10-Blade Diaphragm. Constant f/4 maximum aperture offers consistent performance and light transmission throughout the zoom range..
  • SanDisk 64GB Ultra Class 10 SDXC UHS-I Memory Card - Great choice for compact to mid-range point and shoot camera - Twice As Fast A....
Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

  • MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
  • Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
  • Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
  • Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
  • Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check Stock

Godox AD200Pro Godox AD200 PRO Outdoor Speedlite,200ws TTL HSS 1/8000s 2.4G Pocket Flash Strobe Monolight with 2900mAh Lithium Battery,0.01-1.8s Recycling, 500 Full Power Flashes,Bare Bulb Flash Head

  • ...e compensation. 1/8000s high-speed sync, first curtain sync, second curtain sync, modeling lamp, manual flash, multi flash, Multi Controls the Stroboscopic Rate up to 90 Times.
  • Built-in Godox 2.4G wireless X system,Use Godox 2.4G wireless X system ,Godox AD200Pro Speedlite Studio Monolight is compatible with Nikon I-TTL, Canon E-TTL, Sony TTL, Fujifilm TTL, Olympus TTL, Panasonic TTL,Pentax TTL. With Master＆Slave Function, Godox AD200Pro flash Monolight Can be Used in Combination with Godox TTL Camera Flashes, TTL Outdoor Flashes, etc.
  • 200Ws, with Bare bulb flash head,GN60(m ISO 100, with AD-S2 standard reflector, @28mm), with Speedlite flash head,GN52 (m ISO 10, @35mm). Stable color temperature at 5600° ±100°K over the entire power range. Professional lithium battery pack has large capacity(14.4V/2900mAh) to provide 500 full power flashes and 0.01-1.8s fast recycling.
  • Use Godox 2.4G wireless X system to achieve TTL control or use Godox TTL wireless flash trigger X1 /Xpro/ X2 to wirelessly control functions, wireless adjust flash's power levels, sound beep, as well as triggering the flash. There are also 3.5mm sync cord jack and wireless control port to achieve multiple triggering methods.
Check Stock

Beaster Voice Recognition Module with Microphone Dupont Jumper Wire Speech Recognition Voice Control Board for Arduino

  • This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all..
  • This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized..
  • Digital Interface: 5V TTL level for UART interface and GPIO.
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface.
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic) High-Precision Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix

  • Capable of 10mm, three-dimensional accuracy and both rover and base station operations.
  • Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz.
  • USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.
  • Compatible with Arduino library shows how to read latitude, longitude, heading and speed over I2C without the need for constant serial polling. Time to First Fix: 25s (cold), 2s (hot).
  • Note: This is the GPS board only. It does not come with cables or microcontroller..
Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock