Reviews Serial To Ethernet Gateway Module

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

Universal 9.5mm SATA to SATA 2nd SSD HDD Hard Drive Caddy Case Adapter Tray Enclosure for Laptop CD/DVD-ROM Optical Bay

  • 2nd HDD Case: Add a second 2.5'' HDD or SSD to your laptop via the E-Modular (E-Module) Bay / optical drive bay with this drive caddy. With this 2nd HDD/SSD drive Case to your laptop by replacing your optical drive(CD/DVD-ROM), your laptop performance will be greatly improved..
  • Compatible with: DELL HP LENOVO ThinkPad ACER Gateway ASUS SONY SAMSUNG MSI Laptop which has a 9.5mm SATA CD/DVD-ROM driver. (Not fit for Macbook).
  • High Performance: The 2nd Hard Disk Drive Caddy /Adapter to bring you new maximum data storage flexibility. Works with 2.5inch 9.5mm /7mm Serial SATA Hard drive HDD and SSD (Solid State Drive) ..
  • Easy to Use and Compact Portability: Plug & Play.
  • Fully integrated into Laptop, no cables / software driver needed..
  • Service Guarantee: With 24 Hours friendly and easy-to-reach Customer Service. The product by BaijixinStore is with 12months warranty and free lifetime technical support. (Please note: The item is just Enclosure, not included the internal hard drive).
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter

  • HD44780 2004 LCD 20x4 2004A Character LCD Display Module.
  • Fully assembled and tested Serial LCD 20x4 Module.
Check Stock

FOXWELL NT530 for BMW Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands – Free Online Updates. One year warranty..
Check Stock

FOXWELL NT530 for Volvo Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands - Free Online Updates. One year warranty..
Check Stock

Aideepen 5PCS DFPlayer Mini Mp3 Player Board Module Voice Decode Board Support TF Micro SD Card U Disk Audio Music

  • 【Upgrade】This is a MP3 Player Audio Voice Module, can be connected directly to the speaker.GD3200B chip replacement old YX5200 (Compatibility....
  • Supported Sampling Rates (kHz):8/11.025/12/16/22.05/24/32/44.1/48.
  • 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB..
  • The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF....
  • This Module with battery power supply, speaker, keypad can be used alone, or through the serial port control, as the Arduino UNO or any....
  • A variety of control modes, I/O control mode, serial mode, AD button control mode.-->If you need any questions, please feel free to contact us..
Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

  • 【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
  • 【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • 【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
  • 【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • 【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
Check Stock