Reviews Serial To Ethernet Adapter Board

StarTech.com 2S1P PCI Serial Parallel Combo Card with 16550 UART - IEEE 1284 Card - Serial Parallel PCI - PCI Serial Adapter (PCI2S1P)

  • Add a parallel port and two RS-232 serial ports to your PC through a PCI expansion slot.
  • 2S1P PCI Serial Parallel Combo Card with 16550 UART.
  • PCI RS232 Serial Card plus Parallel Port.
  • 2x Serial and 1x Parallel Adapter Card / PCI Serial/Parallel Card Adapter / Serial RS232 Adapter Card with Parallel Port.
  • All three ports share only one IRQ which minimizes the system resources required to operate the card.
Check Stock

InstallerParts 15 ft DB9 Male to Female 9 Conductor Serial Cable

  • 【Connectivity】Connects from the USB-C port of a PC /computer to the RJ45 console port of a networking switch, a modem or router with a console port.
  • replaces rs232 serial port perfectly, no more RS232/DB9 adapter needed. This is a Console Cable, will NOT operate over an Ethernet port for internet access!!!.
  • 【Compatible Models】a practical serial cable to pair with branded Router, Switch, Firewall, Wireless LAN controller and other devices with console port, such as Cisco, Ubiquiti, Linksys, Juniper, Fortigate, Mikrotik, Huawei, HP ProCurve, H3C,ZTE. Powered by USB port, no external power supply required..
  • 【Compatible Systems】built-in with FTDI-FT232RL chip, fully support Windows 10, Windows 8 / 8.1 /7, XP, Vista, macOS, Mac OS X, Linux. USB C rollover cable reverses all 8 pins in the cable to communicate from a computer Type-C port to a console port..
  • 【Driver Installation】drivers needed before get the cable to work, drivers and instructions available for download from CableCreation.
  • Windows 10 and the latest macOS usually include FTDI drivers as part of the OS when using this FTDI USB cable..
  • 【Warranty】CableCreation provides 24-month product warranty, lifetime technical support and friendly 24/7 customer service..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

Geekworm Raspberry Pi Zero 2 W Soft Router Dual 100M Ethernet Expansion Board X305 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Pi Zero..
  • 【Dual 100M Ethernet】With dual 10/100M Ethernet ports, ideal for soft router applications, fully compatible with OpenWrt without the need for drivers.
  • 【2-Port USB HUB】On-board two USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X305.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X305 V1.2 Expansion Board.
  • Note: not inlcude Raspberry Pi board & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X305..
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

WiFi Bridge WiFi to Ethernet Adapter - AC1200 Dual Band 5G/2.4G Wireless Ethernet Adapter WiFi to Wired Ethernet Adapter Convert Printer to Wireless Ethernet to WiFi Adapter for Printers

  • 【How to using Ethernet-2-ethernet wifi adapter 】1. Network Printer need a wifi ethernet adapter to connect wifi 2.Voip phone need wireless lan adapter 3.Desktop need a stable wifi adapter 4.Camera need a long range wifi ethernet bridge to connect wifi 5.Support Linux, Android, Chrome OS, macOS, Windows 11/10/8.1/8/7/Vista/XP.
  • 【Upgrade Your Wired Devices To WiFi AC1200 High Speed 】By Using this Dual Band Ethernet to WiFi Adapter, Make your Ethernet-enabled Devices Connect the Internet via Wireless Connection. 867Mbps on 5Ghz and 300Mbps on 2.4Ghz - The 5GHz Universal Wireless Adapter Works with Any 802.11ax/ac/a/b/g/n WiFi Routers.
  • 【Adjustable 4 Antennas Make More Stable Connection 】The wireless to Ethernet get better signal by 4x 5dBi Adjustable External WiFi Antennas receives stronger WiFi from router than other two antennas product.The wifi to Ethernet adapter brings a reliable wifi connection for a non-WiFi device provide good signal receiving capabilities and smartly focuses Wi-Fi signals towards ,optional Dual Band offer flexible connectivity and superior range.
  • 【2 LAN Ports Ethernet to WiFi adapter】The....
Check Stock

6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

Dell E-Port Plus Advanced Port Replicator with USB 3.0 for E Series Latitudes, 240W AC - 331-7947

  • 2x USB 3.0, 3x USB 2.0, 1x VGA, 2x DVI D, 2x Display Port.
  • 1x Serial, 2 x PS/2 Connectors, 1 x Parallel Connector, 1x mouse.
  • 1x Keyboard, RJ 45 Ethernet Port, Microphone in, 3.5 millimeter Headphone Jack.
  • Security Cable Slot, Lock/Unlock Switch, easy removal with eject button.
  • 240 Watt AC Adapter, See Full Description for Compatible Dell Models.
Check Stock