Reviews Sedona Rip Saw Rt

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

AIOPR 20V 4-1/2" Cordless Mini Circular Saw with Laser Guide, Rip Guide, Vacuum Adapter and 2 Blades (97630L)

  • Easy & Quick Change of Blade. The 24 teeth wood saw blade and the 60 teeth metal saw blade could be changed with the Allen key easily and quickly..
  • Laser Guide & Bevel Level. The laser guide helps cut a straight line accurately. The bevel lever allows you to set cutting angle up to 45 degrees, max cutting depth is 1-11/16" (at 90°) and 1-1/8" (at 45°)..
  • Clean & Safe. Dust port vacuum adapter keeps cutting area clear out of wood debris.
  • Lock-off Switch prevents the machine from accidentally starting up..
  • Ergonomic Design. Soft rubber handles designs to comfortably fit in hand for improved control with minimal vibration.
  • laser guide and rip guide for precise cutting..
  • What You Get. 1* Mini Circular Saw (with Battery), 1* 24T TCT Saw Blade, 1* 60T HSS Saw Blade, 1* Charger, 1* Allen Key, 1* Rip Guide, 1* Vacuum Adapter, 1* User Manual..
Check Stock

SKIL 75540 4-3/8-Inch by 40T Carbide Flooring Blade

  • Home Power Tools Saws Parts Circular Saw Blades.
  • Great for cutting laminate floor, solid wood floor, and engineered wood floor.
Check Stock

Table Saw Fence System, Classic Table Saw Fence Rail, Metric/Imperial Scale, Table Circular Saw Fence &Guide, Upside Down Backet Set, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The self-stick measuring tape mounts directly to the fence and features high visibility numerals.
  • Sturdy and Secure: The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge rip to the right of the blade..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. Suitable for flip-chip electric circular saw.
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ... time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured..
  • The Thin Rip Jig has a roller guide bearing on the tip to make feed....
Check Stock

RIKON Power Tools 10-326 14\ Deluxe Bandsaw

  • Three Innovative, Patent Pending features make adjusting this redesigned band saw easier than ever before!.
  • Spring Loaded, Tool-Less Blade Guides – easy & fast setting of the guides without wrenches!.
  • Quick-Adjust Rip Fence – adjusts for drift with the simple turning of a few knobs! No tools needed.
  • Quick-Lock Table Trunnion System – handy lever and gear unlock and set table angles in seconds!.
  • Extra Tall Rip Fence – Increased fence and re-saw bar heights of 6” give added support of lumber being ripped or re-sawn.
Check Stock

KAKURI Azebiki Japanese Saw for Woodworking 3-1/2" Made in JAPAN, Japanese Curved Hand Pull Saw for Hole, Mid Panel, Groove Cutting, Ryoba Double Edge Blade for Rip & Crosscut

  • ... ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet

  • EFFORTLESSLY CUT THIN RIPS: The DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood / Ripping Chair Slates, Cabinet allows you to cut reproducible thin rip cuts on the alternate side of a saw blade for safety, accuracy, and cut repeatability.
  • This jig maximizes worker safety, streamlines your workflow, and produces successful outcomes.
  • EVEN CUTS: Measurement markings on jig are easy to read so you can make accurate cuts.
  • Ball-bearing roller keeps stock even while fed through the blade creating a smooth flow and applying consistent pressure.
  • SAFETY FIRST: Protects your hands and fingers by preventing unnecessary hand proximity to the sharp blade.
  • Reduces dangerous kickback by keeping the stock completely on the track and preventing it from getting trapped between the fence and the blade.
  • Allows you to work on the free side of the blade thus avoiding unnecessary risk and stock binding.
  • SECURE GRIP: Easy-to-grip knob on the top turns the locking miter bar piece and holds its position firmly to secure guide position.
  • Dual-locking feature ensures the guide point locks jig in an optimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job.
  • Roller on the end acts as a stop for the material and allows the w....
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock