Reviews Seamless Steel Fuel Pipe

Car Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool

  • Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
  • Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
  • Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
  • Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
  • Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Hose Clamp TJBC 20 Pieces High-carbon Steel Adjustable 0.59-0.94 inch Range Worm Gear Hose Clamp Fuel Line Clamp for Plumbing Automotive And Mechanical Applications Silver 15-24mm

  • ★[Wide pipe clamp size:] In this kit, the range of pipe clamps we provide is 15-24mm, 25pcs 15-24mm is only packed in the box. Easy to store and carry. Free Gift a tool handle for my friend!.
  • ★[Durable quality:] All hose clamps, including straps, shells and screws, are made of high-carbon steel, which are resistant to hardness, torsion, corrosion and acid, and are durable. When installed on a pipe, You will no longer worry about them rusting and cracking..
  • ★[Adjustable:] All hose clamps with screws can be adjusted in size according to the diameter of the pipe. The hose clamp has good flexibility and can be installed and removed at any time. The clamp range represents the minimum and maximum dimensions that can be adjusted. The thickness of the steel belt and gear will not penetrate the steel belt. It can lock the high-pressure pipeline for a long time without sliding and deforming. The torque can reach 10-12KG..
  • ★ [Save time and money:] These stainless steel hose clamps can be installed on the joint of the hose pipe joint to prevent liquid leakage, thereby saving expensive repair time and money..
  • ★[Function and Use:] These clamps are firmly locked and are widely used to fix hoses, pipes, cables, pipes, fuel pipes, etc. It is very suitable for a....
Check Stock

Hose Clamp TJBC 8 Pieces High-carbon Steel Adjustable 0.52-0.8 inch Range Worm Gear Hose Clamp Fuel Line Clamp for Plumbing Automotive And Mechanical Application Blue BTBC13-20

  • ★[Wide pipe clamp size:] In this kit, the range of pipe clamps we provide is 0.52-0.8 inches, 8pcs 0.52-0.8 inches is only packed in the box. Easy to store and carry. Free Gift a tool handle for my friend!.
  • ★[Durable quality:] All hose clamps, including straps, shells and screws, are made of high-carbon steel, which are resistant to hardness, torsion, corrosion and acid, and are durable. When installed on a pipe, You will no longer worry about them rusting and cracking..
  • ★[Adjustable:] All hose clamps with screws can be adjusted in size according to the diameter of the pipe. The hose clamp has good flexibility and can be installed and removed at any time. The clamp range represents the minimum and maximum dimensions that can be adjusted. The thickness of the steel belt and gear will not penetrate the steel belt. It can lock the high-pressure pipeline for a long time without sliding and deforming. The torque can reach 22-26lb..
  • ★ [Save time and money:] These stainless steel hose clamps can be installed on the joint of the hose pipe joint to prevent liquid leakage, thereby saving expensive repair time and money..
  • ★[Function and Use:] These clamps are firmly locked and are widely used to fix hoses, pipes, cables, pipes, fuel pipes, etc. It is very....
Check Stock

uxcell Double Wire Spring Hose Clamp 6mm Inner Dia Fit 6.5-7.2mm OD Hose Fuel Line Silicone Tube Spring Clips Zinc Plated 20Pcs

  • ...rs includes: 7/8/9/10/11/12/13/14/15/16/17mm, 5-pcs each size, 55pcs in total, package in durable transparent plastic box, widely used them on a number of hoses that it can reducing the chances of a fuel or water pipe leak..
  • ☆【DURABLE AND STURDY】--- These spring hose clamps are made of high quality 65mn spring steel, which is strong and sturdy, corrosion resistance in a humid environment, it can be stored for a long time, have highly sealed, the surface of clamps are polishing that can effective prevent pipe damage.
  • ☆【WIDE APPLICATIONS】--- Spring hose clamps are used in a wide range of applications, suitable for hose/gas pipe/air hose/water pipe/automotive fuel line/silicone hose, connection fastening, etc..
  • ☆【EASY TO USE】--- You can easily move these on the tubes with your fingers, using pliers to open the surface and easily lower it on the tube, it can be reused, come with durable transparent box enough to accommodate all clamps in case of lost..
  • ☆【CUSTOMER SERVICE】--- We will provide you with reliable after-sales service. If you are unhappy with our product fro any reason or have any questions, please feel free to contact us, I will reply you within 12 hours and we will solve them for you soon. Please set your heart at rest to ....
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

FXTUL Fuel Injector Cleaner, Fuel System Cleaner Air Intake System Fuel Injector Nozzle Throttle Body Cleaner for Gasoline Diesel Cars with Carrying Case Non-dismantle

  • 【POWERFUL CLEANING TOOL】Improper cleaning of the fuel system will cause blockage and poisoning of TWC. So you need C-100, a professional fuel injector cleaner to help you out with simple and fast cleaning of the fuel system without damage. You can use it on TWC, intake manifold, throttle valve, and exhaust pipe.
  • 【EFI-Electronic Fuel Injection System】Electronic Fuel Injection System has two types, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
  • 【COMPLETE TOOL SET】Most cars and light trucks of the European Union, Asia, and the United States can use this fuel system cleaner because it is equipped with various types of adapters to meet the needs of different models..
  • 【SAFE AND QUICK CONNECTION】The throttle body cleaner has a one-way valve treated with a special process, which has good airtightness. In addition, there is a quick connection joint, which is treated with anti-corrosion and wear resistance. Don't worry about bein....
Check Stock

Quickun 10Pcs 2\ Stainless Steel Hose Clamp Worm Gear Clamps Adjustable 1\-2\(27-51mm) Range, Fuel Line Clamp for Water Pipe, Hose Clips, Automative and Mechanical Application

  • 【Wide Hose Clamp Size:】 In this Set, The range of clamp we provide is 1"-2"(exactly 27-51mm), that is easy to storage and carry..
  • 【Durable Quality:】 All the hose clamps including the band, housing and screw are made of stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • 【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • 【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
  • 【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, household etc..
Check Stock