Reviews Screw in Brake Cap

Silver Stainless Steel Brake Caliper/Master Cylinder/Clutch Slave Cylinder Bleed/Banjo Valve Kit for Brembo on Ducati/Aprilia/Moto Guzzi/KTM

  • Replaces Manufacturer Part Number:1911113 / 1910790 / 1910301.
  • Compatible with: Sportsman 335 1999-2000.
  • The mounting hole is 6.5MM, and the center distance of the mounting hole is 38MM..
  • The live cylinder diameter of the brake pump is 12.7MM, and the oil pipe screw is 10MM..
  • When installing, you must loosen the oil drain screw of the pump under the brake, and continuously press the brake foot brake pump to generate pressure, so that the oil of the brake pump passes through the oil pipe, enters the brake pump, discharges the air, and then tightens the oil drain screw. The brake system does not work without exhausting air.
Check Stock

Coravin Screw Caps - Pack of 6 - Accessory for Coravin Timeless Wine by the Glass Systems and Wine Savers

  • What's Included: Six Coravin Screw Cap accessories in one pack of 6.
  • Experience Wine Differently: The Coravin Aerator enhances your wine experience by immediately mixing the right amount of air with the wine as you pour.
  • How It Works: Coravin Screw Caps combine self-sealing silicone with a premium cap liner to create a tight seal, protecting wine for up to 3 months.
  • Simply open the bottle by removing the screw cap, then immediately replace it with a Coravin Screw Cap.
  • The Technology: Coravin's standard size screw cap fits 98% of wine bottles.
  • Every Coravin Timeless wine-by-the-glass system's needle is slightly off-center so that you pierce a new spot in the cork or screw cap accessory every time.
  • Easy to Clean: When bottle is finished, remove Coravin Screw Cap and rinse with warm, clean water.
  • Do not submerge in water and do not use detergent.
Check Stock

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

  • ...d Controls, P/N 9063, for riders with a 33" or shorter inseam.
  • Parts Included: (1) Shift Assembly, Standard Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

SENQI Bicycle Brake Caliper Set C-clamp Front and Rear A Pair White

  • (F.BRAKE Screw Length 28mm,18mm Nut.) (R.BRAKE Screw Length 12mm,10mm Nut.).
  • Arm length: 47-57mm / Double shaft/ Brake pads can adjust the angle..
  • Suitable for aluminium road frame / field vehicle.
  • This bicycle brake is made of high strength Aluminum alloy material..
  • A good quanlity brake is to protect yourself..
Check Stock

SENQI Bicycle Brake Caliper Set C-clamp Front and Rear A Pair Silver

  • (F.BRAKE Screw Length 28mm,18mm Nut.) (R.BRAKE Screw Length 12mm,10mm Nut.).
  • Arm length: 47-57mm / Double shaft/ Brake pads can adjust the angle..
  • Suitable for aluminium road frame / field vehicle.
  • This bicycle brake is made of high strength Aluminum alloy material..
  • A good quanlity brake is to protect yourself..
Check Stock

4 Pieces Brake Cable Universal Bike Inner Brake Cable Housing Kit Bicycle Brake Cable Replacement for Mountain and Road Bike Gear Kit (Black)

  • Brake cable set: come with a set of brake cable kit, you get 4 pieces inner brake cables, that enough replace for your old one in long life.
  • These set are compatible to mountain bike and road bike universal.
  • Brake cable size: the cable housing is 2.5 m in length and 5 mm in thickness, the front brake cable is 1.1 m in length, the rear brake cable is 1.7 m in length, coming with cable collar, cable end and O-ring.
  • The brake cable housing kit is wear-resistant and durable, help provide safety to the cyclist.
  • Quality material: the brake housing is made with strong PVC coat coming with stainless steel cable, which improves the smoothness of the brake housing, so it is smooth and resistant.
  • It can sustain high cable tension forces without splitting, helping to stop your bike instantly.
  • The shell is made of PVC material, with resistance to cold, heat and oxidation, not easy to deform, ensure the brake sensitive, suitable for most kinds of weather conditions of riding.
  • Applicable scope: bike housing and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance and upgrading of cables.
  • Note: please cutting off no need ended and wear tail-end cap, prevent to hurt yourself.
  • You will get: the housing replacement ....
Check Stock

RUJOI Bike Brake Lever Set,1 Pair Aluminum Alloy Bicycle Brake Handle with 2 Set Bike Brake Cable Wire and Housing for Mountain Bike,MTB, Road Bike, Folding Bike, 2.2cm Diameter

  • ▲1 Pair Universal full Aluminum Alloy Brake Lever :Light But Strong ,Automatic lever position provides quick recovery from the crash,lightweight and durable.
  • ▲Fit with in 2.2cm diameter handlebar: 1.remove the grip and adjust the screw to make sure the screw gaps in line with Brake Handle cracks .2:put the hammer head of brake wire into the corresponding line hole and then tighten the screws.
  • ▲Universal Brake Cable and Housing Set : All be made of Stainless steel inner wires provide smooth movement and higher corrosion resistance.
  • ▲Match with your V-Brake Brakes Length : Front Wheel Cablel is 700*350 wire and Housing ,Back Wheel is 1400* 1200 .All built in hammer in one end already.
  • ▲Fit 99% V brake bikes: Easy Installation and Adjustment ,Suitable for most of V brake or Canti bike.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • ...s, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression plates by flipping the switch on the handle.
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability.
  • Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency.
  • Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7....
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ...d Controls, P/N 9063, for riders with a 33" or shorter inseam.
  • Parts Included: (1) Shift Assembly, Extended Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock