Reviews Screen Printing Exposure Unit Timer

Pentax Wireless Remote Control C

  • 1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds..
  • 2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached..
  • 3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long..
  • 4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times..
Check Stock

Neewer Photography Digital Interval Meter Timer Remote Control Compatible with Nikon D200 D300 D300S D700 D810 D800 D800E F5 F6 F100 F90 F90x Kodak DCS-14n Fujifilm Finepix S3pro S5pro

  • The timer remote is used to trigger the camera shutter with Delay shooting/Self-timer, Bulb shooting/Long exposure timer,Interval timer, Exposure....
  • Delay time and Exposure time: 0 s to 99 hrs 59 mins 59 secs in one-second increments，Interval time:1 s to 99 hrs 59 mins 59 secs in one-second....
  • The remote release button is pressed halfway for autofocus, and fully pressed to trigger the camera shutter..
  • The remote control has an LCD screen, short press the Lighting/Lock button to light up the backlight, long press the Lighting/Lock button to lock the....
  • Compatible with Nikon D850/D810/D800/D800E/D700/D500/D300S/D300/D200/D100/D5/D4/D3/D2/D1/F5/F6/F90/F90X/F100/N90s DSLR Cameraswtih Fujifilm....
Check Stock

ELEGOO Saturn 8K MSLA Resin 3D Printer and ELEGOO Mercury XS Bundle with Separate Washing and Curing Station

  • Large Model Printing: ANYCUBIC Photon Mono X 6K 3d printer has a max print volume of 9.6 x 7.8 x 4.8 inches. The large volume can not only print multiple models at a time, effectively improve work efficiency, but also fully meet the needs of printing large-size models..
  • 9.25" 6K Monochrome Screen: The 9.25" resin 3d printer 6K screen has 5760 x 3600 Px, and ultra-high resolution brings vivid details. The life of the monochrome screen is 4X longer than that of the ordinary LCD screen. Added replaceable scratch resistant film, which greatly reduces the damage rate of the LCD screen..
  • Powerful UV Light Source: The Photon Mono X 6K 3d printer with 40 bright LED lamp beads, the newly upgraded 40 LED matrix parallel UV light source, the strong light source distribution is more uniform, so that Anycubic Photon Mono X 6K 3d resin printer can quickly and accurately display the details of each part of the model, showing high quality models..
  • High Light Transmittance & Fast Printing: The fast LCD 3D printer using the industry-leading 6% light transmittance screen, the printer's fastest printing speed can reach ....
Check Stock

Wireless Remote Control Shutter Release for Sony 6600, 6100, 6400, 6500, 6300, 6000, 5000, 5100, 3000, A550, A560, A580, A700, A850, A900

  • ...ss transmission , distance up to 60M/200ft.Replaces sony RM-SPR1 remote controls and sony RM-L1AM remote commander. You can change different shutter release cable to work with different cameras..
  • ⌛With LCD screen, 4 modes for Shutter Release Control – S (instant single shooting), C (continuous shooting), B (bulb exposure) and 2S (2 seconds delay).
  • 5 settings for Timing Control – DELAY (self timer), LONG (long time exposure timer), INTVL (interval timer), N (number of exposures) and BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots)..
  • ⌛AODELAN remote control can used for wireless or wired shutter release. Transmitter (with LCD screen) and receiver can be used for wireless function, C6 C8 connecting wire can be used for wired function that which can reduce camera shake and allows you to trigger your camera wirelessly up to 196 feet.Using 2.4G transmission technology more ultra- powerful anti-interference ability..
Check Stock

Pixel Timer Shutter Release Remote Control TW283-DC2 Remote Release for Nikon Z7 Z7II Z6 Z6II Z5 D5600 D3300 D5000 D5100 D5200 D5300 D5500 D90 D7000 D7100 D7200 D7500 D780 D610 D750 P7700 P7800

  • ...hedule shooting. Delay Shooting Setting can set delay time and number of shots: delay time alters from 1s to 59s, and number of shots alters from 1 to 99..
  • Intervalometer support timer schedule shooting: 1.timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments: interval timer, long exposure timer (it can use interval timer and long exposure simultaneously) and repeat timer schedule interval time.
  • 2. Number of shots (N1) can be set from 1 to 999.
  • 3. Repeat times (N2) can be set from 1 to 99, "--" being unlimited..
  • When capturing the beautiful moments of sunrise and sunset and flowers bloom and fade , you don't need to wait for the whole time . You can set delay timer,exposure time, interval time, number of shoots, repeat shooting interval time and repeat times. The wireless remote features no directionality, 80M+ remote distance and ultra- powerful anti-interference ability. With 30 channels for options, this dslr timer remote can avoid interference caused by other similar devices.
  • Camera remote is available to control different brand's cameras and models by changing different camera connecting cable.The transmitter and receiver adopts LCD screen which is more easy and simple to handle.
Check Stock

JJC TC-80N3 Intervalometer Timer Remote Shutter Release Time Laspe for Canon EOS R5 R3 5D Mark IV III II 6D Mark II 7D Mark II 5Ds R 1Dx Mark III II 1Ds Mark III 50D 40D 30D 20D and More Canon Cameras

  • Compact Size:12.1*4.0*2.1cm, 90cm long wired remote controller, powered by 2 AAA Alkaline batteries.
  • Self-timer, interval timer, long-exposure timer and exposure-count setting features.
  • Take Photos without Camera Shake and great for Time-Lapse Photography.
  • The timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec.
  • Humanized backlight design allows you to view the LCD screen in the dark.
Check Stock

ELEGOO Saturn 2 MSLA 3D Printer and ELEGOO Mercury XS Bundle with Separate Washing and Curing Station

  • ...ontrast ratio of over 350, which can fully express the details of the character model's hair, fingers and so on. 40 bright LED lights arranged in a matrix provide intense and uniform exposure in each layer of print, improving print quality and accuracy..
  • 【Ultra-Fast Printing】 The max printing speed of ANYCUBIC Photon Mono X 6K 3d printer is 3.15 in/h. With a 6% light transmittance screen, the fastest printing speed of the printer can reach 1s/layer, saving you half of the time than other regular resin 3d printer and reduces costs..
  • 【Compatible Resin & Power Adjustment】 The UV lamp power adjustment range is 30%-100%, which can support the use of more types of resin printing materials to meet your more printing needs. In addition, adjusting the light power appropriately can extend the lifespan of both the screen and light significantly..
Check Stock

Casio G-Shock Mudmaster Mens Watch (Black)

  • Tough Solar Power,100M Water Resistant,Low Temperature Resistant (-10 C / 14 F),Module 3415,Approx. Battery Life: 9 months on full charge (without further exposure to light).
  • Accuracy: +/- 15 seconds per month ,Full Auto Calendar (Pre-programmed until the year 2099),5 Daily Alarms (4 one-time and 1 snooze alarm),World Time 31 time zones (48 cities + UTC), city name display, daylight saving on/off.
  • Full Auto LED (Super Illuminator) Backlight with Afterglow,Countdown Timer Measuring unit: 1 second Countdown range: 24 hours Countdown start time setting range: 1 minute to 24 hours (1-minute increments ans 1-hour increments).
  • Barometer Display range: 260 to 1,100 hPa (7.65 to 32.45 inHg) Display unit: 1 hPa (0.05 inHg),Thermometer Display range: -10 to 60 C (14 to 140 F) Display unit: 0.1 C (0.2 F).
  • Digital Compass Measures and displays direction as one of 16 points Measuring range: 0 to 359 degrees Measuring unit: 1 degree 60 seconds continuous measurement Graphic direction pointer Bidirectional calibration and Northerly calibration function Magnetic declination correction Bearing memo....
Check Stock

ELEGOO Saturn S 3D Printer, MSLA UV Resin Printer with 9.1 inch 4K Monochrome LCD, Odor Reducing Facility, Speedy Printing and High Precision, 7.7x4.8x8.2 inch Larger Printing Size

  • 【Larger Build Volume】With a build volume measuring 196x122x210mm /7.7x4.8x8.2 inches, ELEGOO Saturn S is capable of printing larger and more prints, letting your creations have more possibilities.
  • 【9.1” Ultra 4K Mono LCD】Equipped with 9.1 inches 4K monochrome LCD, Saturn S can prints out works at 48µm high XY resolution and faster exposure time is as fast as 2-3s per layer. You are able to achieve details of prints that weren’t possible with the previous printer.
  • 【Build for Better Printing】Build-in activated carbon reducing bad odor of resin, offer you a more comfortable and fresh experience. Double Z-axis linear railway equipped with a shock absorption unit, making a more stable and accurate moving, ensuring you will get reliable and consistent results. ATTENTION USB port next to the vat is for odor reducing facility ONLY.
  • 【Outstanding Printing Quality】Upgraded LED light matrix for more uniform UV distribution, providing outstanding printing quality and better details. The thinner FEP film 2.0 allows models to adhere better without delaminating and sticking to the vat.
  • 【ELEGOO Authorized Distributor】You will receive ELEGOO Saturn S set, 1-year warranty on the whole printer (LCD screen, FEP film, and tool kit excluded), and profe....
Check Stock