Reviews Scaffolding Coupler

MRT SUPPLY 17 Foot Type IA Aluminum Multi Position LT Ladder with Ebook

  • Air craft grade lightweight aluminum ladder provides versatility and stability while you work – Rock Lock system lets you set up in seconds, simply push the lock to release the ladder, then tap to lock – Tip and Glide wheels make transporting from job to job easy.
  • Dual pin hinge and wide flared legs puts you in the safest position to get the job done – Ladder configurations include: A frame, staircase, 90 degrees, extension, and scaffolding – Easy to adjust to multiple heights and can adapt to almost any job – Complies with all applicable OSHA and ANSI A14.2 standards.
  • Specifications: Maximum A frame height: 7 feet 1 inch – Maximum extension height: 17 feet – Maximum scaffolding height: 3 feet – Maximum workbench height: 4 feet – Minimum A frame height: 4 feet 1 inch – Minimum extension height: 9 feet.
  • Palm and hinge system: Triple locking hinge – Spreader system: Hinge lock – Storage depth: 9 inches – Storage height: 4 feet 7 inch – Unique configurations: 24 – Weight capacity: 300 pounds – Ladder weight: 30.5 pounds.
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • DURABLE MATERIAL : 304 stainless steel construction makes the keg coupler more durable and sanitary. stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go" !!.
  • NO LEAKS: Thoughtful 5/16" gas in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
  • EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
  • SPACE SAVING: Low profile D system coupler features a space saving....
Check Stock

Straight Trailer Coupler 2\ Ball 2\ Channel Width 3500 LBSTrailer Tongue Coupler

  • 2-5/16" Ball Trailer Coupler Max.trailer tongue weight:2,100LBS.
  • A-Frame Trailer Coupler Max.gross trailer weight:14,000LBS.
Check Stock

Aviditi Inspection Tag, Legend\Accepted\

  • ... tear resistance of the tag, which can be applied for a long time.
  • Suitable size: the double-sided rectangular cardstock tag is about 3 inch in width and 6 inch in height, proper size is convenient for hanging, which is enough for eye-catching attention, and does not hinder daily life.
  • Tag legend: the front legend of scaffolding tag reads OK, and the back-side legend is daily inspection record, printed with dark green and black colors to ensure that they are clearly visible and easy to read.
  • Useful function: this scaffold inspection tag is usually applied on construction sites to record scaffolding inspections and related activities, which can inform workers that the scaffold can work safely, and there is space to write data and signature, which helps to warn about safety in use, and display information about equipment status, inspection plans or maintenance activities.
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

AORRZER Grease Gun Coupler, Strong Lock on Grease Couplers, 12000 PSI High Pressure Greases Gun Coupler, Compatible with All Grease Guns 1/8\ NPT Grease Gun Fittings,Duty Quick Release Grease Couplers

  • 【Upgrade grease coupler】AORRZER grease gun coupler Upgrade-strong 6-jaw coupler, grease gun coupler reinforced jaws and quality sealing gasket ensure long lasting and stable performance tighter and no oil leakage, Use testing: Leak prevention even when tested at extreme pressures of 12,000 PSI or higher..
  • 【High quality and sturdy】The grease gun coupler is made of upgraded material alloy steel, optimizing the thickness of the steel and upgrading the 6-jaw bite lock on the original basis, quality steel, quality design principle, Wear-resistant and durable Long life span, Lowest lifetime cost, believe me, this will be your best choice!!.
  • 【Simple operation】Grease gun coupler with smooth strong 6-jaw bite lock on function allows one-handed operation, no need to hold when lubricating, after locking the grease gun coupler, you can free your hands to operate the grease gun..
  • 【Wide application】grease gun coupler fits all 1/8" NPT standard grease gun, Pneumatic Grease Gun, manual grease gun, electric grease gun, also suitable for all DIN and SAE grease nipples and all SAE and metric Zerk joints. Simply replace your existing grease gun coupler and this Strong grease gun tool is ready for use in automotive repair, job site large machinery and axles ....
Check Stock

AORRZER Grease Gun Coupler, Strong Lock on Greases Gun Couplers, 12000 PSI Quick Release Grease Coupler with 12\ Spring Flex Hose, Compatible with All Grease Guns 1/8\ NPT Grease Gun Fitting(1 PCS)

  • 【Upgrade grease coupler】AORRZER grease gun coupler with 12 Inch Spring Flex Hose，Upgrade-strong 6-jaw coupler, grease gun coupler reinforced jaws and quality sealing gasket ensure long lasting and stable performance tighter and no oil leakage,Use testing: Leak prevention even when tested at extreme pressures of 12,000 PSI or higher..
  • 【High quality and sturdy】The grease gun coupler is made of upgraded material alloy steel, optimizing the thickness of the steel and upgrading the 6-jaw bite lock on the original basis, quality steel, quality design principle, Wear-resistant and durable Long life span, Lowest lifetime cost, believe me, this will be your best choice!!.
  • 【Simple operation】Grease gun coupler with smooth strong 6-jaw bite lock on function allows one-handed operation, no need to hold when lubricating, after locking the grease gun coupler, you can free your hands to operate the grease gun..
  • 【Wide application】grease gun coupler fits all 1/8" NPT standard grease gun, Pneumatic Grease Gun, manual grease gun, electric grease gun, also suitable for all DIN and SAE grease nipples and all SAE and metric Zerk joints. Simply replace your existing grease gun coupler and this Strong grease gun tool is ready for use in automotive repair, job ....
Check Stock

Boltigen R1234YF Low Side Quick Coupler，R1234YF to R134A AC Charging Hose Adapter Fitting Connector for Car Air-Conditioning

  • 【WIDE APPLICATION】Our low side quick coupler fits for R1234YF/R12 to R134A car air-conditioning refrigerant frenon recharging..
  • 【EASY INSTALL DESIGN】Our low side quick coupler designs with auto shut off. Push & Lock design makes it easy and convenient to removal and install..
  • 【PREMIUM QUALITY】Our R1234YF to R134A quick coupler is made of solid premium aluminum with strong construction to ensure highly working performance, long life and durable to use..
  • 【SIZE 】R1234YF to R134A quick coupler: low side R1234yf coupler 14 mm female x 1/4’’SAE male. R12 to R134a Adapter: 1/4’’ SAE female x low pressure 13mm R134A quick coupler..
  • 【SERVICE】Our QC department do 100% quality inspection on the R1234YF to R134A quick coupler before delivery. We will do 100% refund if the R134a Quick Fitting Coupler is defective. Your valuable suggestions and advice will be greatly appreciated by our team..
Check Stock

CharaVector 4 Step Ladder,Lightweight Folding Step Ladder,Folding Step Stool with Built-in Tool Platform and Anti-Slip Feet,Step Ladder with Handrails

  • Dimensions - Max A-frame height: 5'1'' | Max Extension Height: 11' | Max scaffolding height: 3' | Max workbench height: 3' | Min A-frame Height: 3'1'' | Min Extension Height: 7' | Storage Depth: 8" | Storage height: 3'7" | Width at base: 24" | Weight: 25 lbs.
  • The Velocity also includes several innovative new features such as the dual-pin hinge and the easy-to-use rock, locks for quick adjustment.
  • The Velocity can be used in many unique configurations as an a-frame, extension, staircase and 90-Degree ladder, and with Velocity trestle brackets (sold separately) to form a trestle-and-plank scaffolding system.
  • The Velocity's wide-flared legs and aerospace-grade aluminum construction provide an unmatched feeling of safety and stability.
Check Stock