Reviews Sata Pci Adapter

StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter (PEXSAT34RH)

Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slot.
PCI Express 20 SATA Controller with HyperDuo SSD Tiering.

⭐This riser card can expand the PCI-E 1X slot on the motherboard into 4 PCI-E 1X slots, thereby solving the problem of insufficient motherboard slots..
⭐The 4PIN and SATA interfaces enhance the power supply capacity, thereby reducing the burden on the motherboard..
⭐This adapter card is a hardware adapter, driver-free, plug and play..
⭐It consists of two parts, one is the main card, which is installed on the motherboard through the PCI-E x1 interface, and the other is the device card, which has 4 PCI-E x1 and is connected through a customized USB 3.0 cable,for transfer between PCI-E and PCI-E..
⭐The 4 expansion 1x slots are all in GEN2 mode, even if they were in gen1 mode before. It is a good choice for old motherboards..

Extend the 15 pin power interface of the motherboard to the desktop, bookcase, etc, connect the hard disk to read data anytime, anywhere, simple, convenient and fast.
15 pin SATA male to female extender cable cord adapter connects a computer power supply to Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards, lock connector design is adopted to prevent accidental disconnections.
Flexible 18 AWG power extension cable with multi-voltage compatibility, widely compatible with Sata, hard disk, optical drive, SSD, PCI-E card and other devices with SATA.
Extend the motherboard power interface, reduces the risk of damage to the drive or motherboard SATA connector by eliminating the need to tighten or stretch the cable to make the necessary connections.
15 Pin ssd power cable are adopted environmentally friendly technology, fine workmanship, strong flexibility, anti-wear, good quality, length is 33.5cm (13.18").

PCI 32 BIT Riser Card with Flex Cable. 1-slot PCI 32 bits/5V 66MHz riser card with 6" flexible cable..
Authentic only if sold by Micro SATA Cables..
Categories: Drive Adapters, Drive Converters, PCI & PCI-E Products, PCI / PCI-E Cards.

Add 2 external or internal SATA 6 Gbps ports to a computer through a PCI Express slot.

...pecifically designed to connect existing motherboards with SATA port to an external hard drive, enclosure or docking station with eSATA.
Convenient alternative to using a USB port on your computer.
Blazing fast SATA III speeds up to 6 Gbps are faster than USB 3.0 equipped drives and much faster than a USB 2.0 to HDD adapter.
Upgrade to an eSATA enabled TB hard drive for direct file back-up instead of using a network.
Provides secure connections for fast and reliable file transfers.
Backwards compatible with SATA I, II, III hard drives.
Fully shielded & flexible eSATA to SATA cable is engineered to reduce EMI noise interference.
Latching SATA connector attaches securely for a trouble-free installation.
Flexible cable jacket allows installation in tight computer cases.
SATA and eSATA connectors are keyed differently to avoid connecting incorrectly.
Cost-effective 2-pack provides spare or superior replacement SATA to ESATA cable cable to fix troublesome connection problems.
Longer cable length allows location of an external hard drive in a convenient location.
Low cost way to add eSATA when you have a free internal SATA port or to repurpose older SATA internal hard drives..
Compatible with Acomdata eSATA HDD Enclosure, Anker eSATA HDD Docking Station, Fanto....

Add 2 external or internal SATA 6 Gbps ports to a computer through a PCI Express slot.

4x SATA2 Ports, Support RAID 0, 1, 5, 10, JBOD.
Chipset: nVidia GeForce 7025/ nForce 630a.
CPU: Socket AM3 Support AMD Phenom II/ Athlon II/ Sempron 100 Series Processors.
Memory: 2x 240pin DDR3-1800(O.C.)/1600(O.C.)/1333/1066 DIMMs, Dual Channel, ECC/Non-ECC Un-buffered, Max Capacity upto 16GB.