Reviews Sata Interface Drives

Unitek USB 3.0 to IDE and SATA Converter External Hard Drive Adapter Kit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk, One Touch Backup Function, Included 12V/2A Power Adapter

  • Enables to operate up to IDE + SATA drives simultaneously and compatible with 2.5″/3.5″ SATA/IDE hard drives and SSD，Supports drives with a capacity of up to 3 TB.
  • Supports 5.25″ optical drives with SATA or IDE interface: CD/DVD-ROM, CD/DVD-RW, Blu-ray DVD, MO, zip and combo devices.
  • LED indicator shows power status and on/off switch ensures you an easy control of this device.
  • 3 feet (0.9 meters) USB 2.0 cable, compatible windows PC or mac with available USB 3.0 /2.0/1.1 port and support data transfer rate up to 480mbps.
  • Ship next business day! 24 * 7 Email Support! Free Lifetime Technical Support and 24 Months Warranty from Cinolink..
Check Stock

Toshiba DT01ACA050 / HDKPC05 3.5-Inch 500GB 7200 RPM SATA3/SATA 6.0 GB/s 32MB Hard Drive DT01ACA050 (Renewed)

  • The SATA interface 7,200 RPM desktop series drives are targeted at desktop all-in-one and gaming PCs, home servers, external HDDs, and consumer electronics products such as set-top boxes and digital video recorders..
  • Serial ATA (SATA) is a serial interface that can operate at speeds up to 6Gb/s. SATA is scalable and enables easy integration, high performance, and efficient system designs. SATA is the evolutionary replacement for the Parallel ATA (PATA) storage interface..
  • Ramp Load technology restricts the drive’s recording head from touching the disk media, resulting in improved protection of the drive while being transported and less wear to the recording head..
  • Optimized for use in power-friendly consumer and commercial desktop computing systems, the drive’s power management technology provides significant power consumption savings at 5.2 watts (or less) active idle, and 1.0 watt standby and sleep power requirements..
  • Toshiba’s advanced servo techniques and mechanical design minimizes drive acoustics, making them as silent as possible during operation..
Check Stock

DiLinKer OCuLink SFF-8611 to PCIE SFF-8639 U.2 NVMe with Power Cable 1M

  • Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface.
  • Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0 / RAID 1 or spanning or JBOD.
  • Supports B key M.2 SATA SSDs including full-length M.2 SSD drives (2230 / 2242 / 2260 / 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
  • TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support.
  • M.2 Adapter / M.2 SSD Adapter / M.2 SATA Adapter / Dual M.2 to SATA Adapter / M.2 Drive to SATA Adapter / Dual SSD Adapter / M.2 SATA SSD / m 2....
Check Stock

EDIMS Internal Mini SAS Cable 36 Pin Mini SAS 4i SFF-8087 Male to 4xSAS 29 SFF-8482 Female for SAS Server, Raid Card,3.3FT

  • External Mini SAS 26Pin (SFF-8088) to 4x 7Pin Sata female Cable.
  • It has an external 26-pin SFF-8088 male Mini-SAS plug (with release ring) on one end and 4x 7Pin Sata on the other.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA.
  • Mini SAS guarantees performance at 3.0 Gigabits per second. This SAS cable features Mini SAS type SFF-8088 connectors and Internal SATA connectors. This cable connects a to SFF-8088 Mini SAS Controller directly to 4 SATA drives.
Check Stock

SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
  • 【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
  • 【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
  • 【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
  • 【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..
Check Stock

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

  • 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
  • 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
  • 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
  • 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
  • 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....
Check Stock

Inateck USB 3.2 Gen 2 to SATA Adapter Disk Cloning in Software Applicable for 2 x 2.5/3.5 Inch SSDs/HDDs 12V/3A Power Adapter Included

  • Dual SATA Interfaces: Two SATA interfaces allow two 2.5/3.5” SATA SSDs/HDDs to run simultaneously..
  • High-speed Transfer: The new USB 3.2 Gen2 standard significantly improves the performance of SATA interfaces. The transfer rate of a single interface....
  • Fast Read Write Speed: A maximum read/write speed of 6Gbit/s can be delivered when only one interface is in use. The total bandwidth can reach up to....
  • Disk Cloning in Software: You can clone disks with software, making the cloning process more visual than offline cloning to be tracked in real time.....
  • Wide Compatibility: This works with mainstream 2.5"/3.5” SATA drives. Compatible with Windows 10/8/7, Mac OS and Linux..
Check Stock

ORICO 2.5 SSD SATA to 3.5 Hard Drive Adapter Internal Drive Bay Converter Mounting Bracket Caddy Tray for 7 / 9.5 / 12.5mm 2.5 inch HDD / SSD with SATA III Interface(1125SS)

  • 【2.5 to 3.5 Drive Adapter】- ORICO ssd adapter can easily convert 2.5-inch SATA drives to 3.5-inch size. Compatible with any 7 / 9.5 / 12.5mm 2.5-inch hard drives..
  • 【Convenient Use】 - The ssd caddy itself has a SATA III interface, which does not require data cables and drivers, supports hot swapping, plug and play. Compatible with Windows, Mac OS and Linux..
  • 【6Gbps SuperSpeed】 - Adopting SATA 3.0 protocol, the maximum transmission rate of this 2.5 to 3.5 ssd converter is up to 6Gbps, which enables high-speed transfer of HD movies and data. Backward compatible with SATA I/II..
  • 【Air Flow Design】 - The hard drive tray is made of ABS plastic, has multiple slots on both sides, and features an open design that allows for air flowing to maximize protecting your hard drive..
  • 【Wide Application 】- It can be used anywhere 3.5-inch drives are commonly used, including desktop computer drive bays and side or bottom mount drive enclosure trays..
Check Stock

Toshiba DT01ACA200 2TB 7200 RPM 3.5in Internal Bare/OEM Drive (Renewed)

  • ...ocess includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
  • The SATA interface 7,200 RPM desktop series drives are targeted at desktop all-in-one and gaming PCs, home servers, external HDDs, and consumer electronics products such as set-top boxes and digital video recorders..
  • Serial ATA (SATA) is a serial interface that can operate at speeds up to 6Gb/s. SATA is scalable and enables easy integration, high performance, and efficient system designs. SATA is the evolutionary replacement for the Parallel ATA (PATA) storage interface..
  • Ramp Load technology restricts the drive’s recording head from touching the disk media, resulting in improved protection of the drive while being transported and less wear to the recording head..
  • Optimized for use in power-friendly consumer and commercial desktop computing systems, the drive’s power management technology provides significant power consumption savings at 5.2 watts (or less) active idle, and 1.0 watt standby and sleep power requirements..
Check Stock