BENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches
- FLEXIBLE SATA POWER CABLE connects the latest Serial ATA hard drives or optical drives to a power supply with legacy Molex LP4 ports.
- Male to Female Molex to SATA cable with straight connectors is the perfect 10 inch length for internal cable management.
- COST-EFFECTIVE 3-PACK of hard drive power cables provides a spare or replacement SATA to Molex cable when upgrading your computer.
- IDEAL SOLUTION for the DIY computer builder or IT tech repair when installing new or replacement SATA hard drives or DVD drives to a power supply that only has Molex power ports.
- RECYCLE LEGACY EQUIPMENT to connect new SATA HDDs and optical drives to older power supplies with 4 pin Molex ports.
- COMPATIBLE with 5V SATA devices connecting to 12V ATX power supplies.
- Sample compatibility list includes Antec VP-450W Power Supply, ASUS 24x DVD-RS serial-ATA internal optical drive, ASUS DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5" Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5" SSD, Kingston Digital 120GB ....
Check StockQphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166
- [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
- [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
- [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
- [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
- [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check StockSATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices
- ▶【10 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 10 SATA 3.0 interfaces and supports the simultaneous connection of 10 SATA hard disks, the transfer speeds up to 6Gbps.
- ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
- ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
- ▶【Supports RAID Mode】: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux.
- ▶【What You Get】 : 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stocksmartelf PCIe X1 SATA III Card 6 Ports ASM1166 Chip, SATA 3.0 6Gbps PCIE Controller Expansion Card Adapter with 6 SATA Cables+Thin Bracket,Non Raid
- [ PCIe 6-Ports SATA 3.0 Expansion Card ] The 6-port SATA control card based on ASM1166 chip, It can add six SATA 3.0 devices (The max transport speed can reach 6Gbps ).Backward compatible with SATA 1.0 and SATA 2.0..
- [ Wide Compatibility ] Our 6-port PCIE 1X SATA 3.0 card are suitable for PCIe X1/X4/X8/X16 card slots.
- it is compatible with multiple operating systems such as Windows/ 8/10/synology/Ubuntu/Linux, and suitable for 99% of the case size on the market..
- [ High Quality PCIe SATA Card ] This 6-port PCIe SATA III controller card is non-RAID and data can be protected by the operating system. High-performance heat sink, can withstand high temperature for a long time. High-quality slots and chips increase the durability and stability of this card. The 3 upgraded FP solid capacitors make the power supply more reliable and safe..
- [ Support ACHI 1.0 Mode ] When your PC’s SSD/HDD is in AHCI boot mode, you can directly insert the hard drive into this sata card, no driver needed, just plug and play.(Note: please make sure that the PC’s SSD/HDD is in AHCI boot mode, otherwise a blue screen will be reported.).
- [ What You Get ] 1* PCIe to SATA III 6-port expansion card.
Check StockFIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)
- 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
- SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
- 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
- SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
- 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
- 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
- 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check StockQIVYNSRY 3PACK SATA Cable III 3 Pack 6Gbps Straight HDD SDD Data Cable with Locking Latch 50cm 18 Inch for SATA HDD, SSD, CD Driver, CD Writer, White
- ★Data High-speed Transmission:only 5 seconds to transfer a 1GB file..
- ★Cost-effective 3 Pack Combo: 3 Pack White SATA 3 cable is a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration..
- ★SATA 3 cable is designed to connect motherboards and host controllers to internal Serial SATA hard drives and DVD drives, quickly upgrading your computer for expanded storage..
- ★6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II..
- ★Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer. What You Get: QIVYNSRY SATA 3 cable x3, 18-month warranty and lifetime friendly customer service..
Check StockPcie Sata Expansion Card 10 Port , Sata Pci Express Serial Adapter Card 10 Port 6 Gbps with 10 SATA Cables for Filcoin Mining Rig and Adding SATA 3.0 Devices
- 【Sata Expansion Card】:If you want a simple and small solution to expand your sata storage by 10x then this is the way to go. Fits nicely between two pcie cards with all 10 sata slots plugged and working..
- 【Pcie To Sata】:Chip:ASM 1166 Supports SATA 3.0, backward compatible with SATA 2.0 and SATA 1.0.Equipped with 10 SATA 3.0 ports, compliant with Serial ATA 2.0 specification, transfer rate up to 6Gdbs, support SATA interface for high-capacity HDD/SSD/optical drive.
- 【Easy to use】:Works strait out of the box no Drivers needed..
- 【System Support】:Support Windows 10 / 8 / 7 / Vista / XP (32/64-bit) and more operating system..
- 【Service】:We have professional R&D team, will continue to launch new products to meet customer needs and thank you for your supporting.If you have any questions, please feel free to contact us..
Check StockCable Matters 2-Pack 6 Gbps SATA III to eSATA Cable 3 Feet
- Internal to external connectivity changeover SATA cable is specifically designed to connect existing motherboards with SATA port to an external hard drive, enclosure or docking station with eSATA.
- Convenient alternative to using a USB port on your computer.
- Blazing fast SATA III speeds up to 6 Gbps are faster than USB 3.0 equipped drives and much faster than a USB 2.0 to HDD adapter.
- Upgrade to an eSATA enabled TB hard drive for direct file back-up instead of using a network.
- Provides secure connections for fast and reliable file transfers.
- Backwards compatible with SATA I, II, III hard drives.
- Fully shielded & flexible eSATA to SATA cable is engineered to reduce EMI noise interference.
- Latching SATA connector attaches securely for a trouble-free installation.
- Flexible cable jacket allows installation in tight computer cases.
- SATA and eSATA connectors are keyed differently to avoid connecting incorrectly.
- Cost-effective 2-pack provides spare or superior replacement SATA to ESATA cable cable to fix troublesome connection problems.
- Longer cable length allows location of an external hard drive in a convenient location.
- Low cost way to add eSATA when you have a free internal SATA port or to repurpose older SATA internal hard drives..
Check StockStarTech.com 4 Bay USB 3.0 (5 Gbps) Hard Drive Docking Station w/UASP for 2.5" & 3.5" SATA SSD HDD - Multiple External Hard Drive Cloner/Copier Dock (SDOCK4U33)
- Support SATA III (6 Gbps) and UASP for optimal performance.
- Compatible with USB enabled computer systems such as Dell Optiplex & Apple Mac & MacBook and SATA 2.5in/3.5in hard drives.
- RELIABLE SUPPORT: Backed by a StarTech.com 2-year warranty, this 4 bay SATA hard drive docking station has free lifetime technical support.
- Dock and Swap Hard Drives directly to your computer system without mounting.
- Connect and swap four 2.5/3.5” SATA drives or SSD through USB 3.0.
- DUAL FANS: Keep your drives running cool and help prevent premature drive failure with the built-in dual 40 mm fans on this multiple hard drive copier.
- INDEPENDENTLY POWERED SATA CONTROLLERS: You will experience a hassle-free operation with this hard drive duplicator dock. It features independent SATA controllers allowing for uninterrupted data transfers while hot-swapping the other drives.
- MULTIPLE HARD DRIVE DUPLICATOR DOCK: Connect and swap four 2.5 / 3.5” SATA HDD/SSD drives simultaneously through a single USB port with this 4 bay external hard drive cloner.
- Hard Drive Dock / Four Bay Dock / Hard Drive Docking Station / SATA Dock / Hard Drive Docking Station with UASP / SATA HDD Docking Station / Hot Swap Hard Drive Dock.
- EXPERIENCE HIGH PERFORMANCE: This USB 3.0 to SATA hard d....
Check Stock