Reviews San Disk External Ssd

Geekworm for Raspberry Pi 4, X857 V2.0 mSATA SSD Expansion Board + X735 V3.0 Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board (Not Include Raspberry Pi 4)

  • √[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
  • √Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
Check Stock

ORICO 5 Bay Docking with Clone USB 3.0 to SATA External Hard Drive 5 Bay Docking Station with Duplicator Offline Clone Function for 2.5 or 3.5in HDD/SSD Max Support 5X 16TB [6558US3-C]

  • 【80TB Large Capacity & Compatible 2.5/3.5 inch HDD SSD】: External 5 Bay hard drive docking station support up to 80TB (5x 16TB hard drives), compatible with 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives, Perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery, gaming data backup, etc..
  • 【Offline Clone and Duplicator 】: The Orico 5 Bay External hard drive docking station can be used to Offline offline cloning / Duplicator from an source hard drive to target disk without connecting to a computer, or as external storage to transfer data between a hard drive and your computer..
  • 【USB 3.0 Hard Drive Dock Superspeed up to 5 Gbps】: SuperSpeed USB 3.0 Hard Drive Enclosure DOwith data transfer rates up to 5Gbps, support UASP Protocol. 20% faster than the traditional USB 3.0, and backward compatible with USB2.0 and USB1.1..
  • 【Tool-free & 180° Heat dissipation Function】Plug and Play, No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation. Hard Drive Stock With the movable design, the hard drive is more stable ....
Check Stock

SATA to USB 3.0 Adapter AkoaDa Durable Nylon Braid USB to Sata Adapter Hard Drive Adapter Portable Cable Support for SSD Data Transfer Grey

  • Portablely Usage : The sata to usb 3.0 adapter allows you to connect a 2.5" SATA SSD HDD with your computer,Add drive space to your laptop.Connect to....
  • Fast speeds transfer : This sata to usb 3.0 adapter supports USB 3.0 data transfer speeds of 5Gbps.When connected to a computer that supports UASP,....
  • Plug and Play : Quickly recognitiona SATA SSD, no need to install the drive and No external power supply required.plug in the hard disk to read....
  • Wide Compatibility : sata to usb 3.0 adapter is compatible with PS4, Xbox, Windows 10/8.1/8/7/Vista/XP, Mac OS Supports 2.5 '' SATA SSD.
  • What You Get : We provide this USB 3.0 to SATA III Hard Drive Adapter Cable with 24/7 customer service, if you have any questions,we will resolve your....
Check Stock

MAIWO MacBook SSD Enclosure, Type-C to 12+16 PIN Apple Flash AHCI Hard Drive Adapter for 2013-2017 MacBook Pro, MacBook Air, Mac Pro, iMac, USB3.2 GEN2x2 Max 20Gbps

  • 【Compatibility】This External Hard Drive Enclosure for 12+16 PIN AHCI SSD is compatible with original 12+16 PIN MacBook SSDs including 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro, 2014 Mac Mini. (If you need this enclosure to support PCIe NVMe SSD, please make sure your NVMe SSD also supports AHCI and you need an adapter to connect it to this enclosure.).
  • 【20Gbps Transmission Speed】Equip with JMS586A chipset and USB 3.2 GEN2x2 output interface, the transmission speed can reach 20Gbps..
  • 【Excellent Heat Dissipation】This 12 16 pin mac ssd enclosure is made of aluminum alloy with CNC progress, very durable and compact, comes with a silicone pad for quicker heat dissipation to protect the hard disk..
  • 【Easy Installation】This 12+16 pin ssd adapter equips with screw and screwdriver. Just take out the ABS bracket from the enclosure, then insert SSD to the slot and fix it with screws..
  • 【Wide Application】Support Windows XP/7/8/10/11, Linux and Mac OS. Work with Desktop, Laptop, Xbox, PS5/PS4/PS3, Smart TV, Router, etc..
Check Stock

WAVLINK USB 3.0 to SATA I/II/III Dual-Bay External Hard Drive Docking Station for 2.5/3.5 Inch HDD/SSD with UASP (6Gbps), Support Offline Clone Duplicator and Auto Sleep Function [12TB X2 ]-Black

  • Support USB 3.0 external, SATA-I/II/III internal.
  • Works great with 2.5 inch and 3.5 inch SATA HDD/SSD..
  • Support transfer speeds up to 6Gbps by UASP transfer protocol, which is up to 20% faster than USB 3.0. Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1).
  • Support Offline Cloning up to 60Mbps. No drivers needed, easy installation.
  • Offline clone is from source disk to target disk, make sure the capacity of target disk is larger or equivalent to that of source disk.
  • Highly efficient (12V, 3A), stable and reliable DC power source a steady supply of energy.
  • Automatic sleep mode after 30 minutes of inactivity saves energy..
  • Tool-free installation on Windows 10 through XP, Mac OS X, and Linux / Unix, Support hot-swapping and easy set up.(No drivers are required for the disk dock itself as it uses the standard USB Mass Storage class).
Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

  • √[Important] Strongly recommend to use 5.8G WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
  • √ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
  • √ Allows booting OS from your HDD/SSD for fas....
Check Stock

SATA to USB Cable, EYOOLD USB 3.0 to SATA III Hard Drive Adapter Converter for 2.5 Inch SSD & HDD Data Transfer, Support UASP (Black)

  • QUICKLY ACCESS A SATA SSD OR HDD: Add drive space to your laptop by connecting to a SATA 2.5" SATA SSD or HDD using this SATA to USB cable. You can connect to an external drive to: add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop. Cable will work ONLY with 2.5" SATA drives, 3.5"/5.25" drives are NOT SUPPORTED..
  • FAST TRANSFER SPEEDS: The SATA to USB adapter supports USB 3.0 data transfer speeds of 5Gbps..
  • CONNECT FROM ANYWHERe: The hard drive USB adapter is a portable solution that tucks away nicely in a laptop bag with no external power required..
  • SAVE TIME: The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure. It’s plug-and-play and doesn’t require drivers..
  • 18 MONTH WARRANTY - Exclusive BENFEI Unconditional 18-month Warranty ensures long-time satisfaction of your purchase.
  • Friendly and easy-to-reach customer service to solve your problems timely.
Check Stock

Cablecc USB 3.0 Male to 17+7pin SSD HDD Hard Disk Cartridge Drive for 2012 Air A1465 A1466

  • 1.The hard disk must be 7+17pin macbook air SSD(the other SSD cannot work).
  • 2. the windows cannot read any mac format SSD, you need to format it first for windows..
  • PCBA 17+7pin SSD HDD to USB3.0 Hard Disk Cartridge Drive.
  • The PCBA can convert the Macbook Air SSD to USB 3.0 port..
  • Compatibility: Only use for MacBook AIR A1465 A1466 MD223 MD224 MD231 MD213 MD232.
Check Stock

EYOOLD SATA to USB Cable External Hard Drive Adapter for 2.5-inch SSD & HDD, Support UASP, 9-inch

  • QUICKLY ACCESS SATA SSD OR HDD: Add drive space to your laptop by connecting to a SATA 2.5" SSD or HDD using this SATA to USB cable--you can add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop.
  • 5Gbps HIGH-SPEED OUTPUT: The SATA to USB adapter supports USB 3.0 data transfer speeds of 5Gbps, is Reverse compatible with USB 2.0 & USB 1.1, 70% faster than conventional USB 3.0 when connected to a computer that also supports UASP.
  • SLIM & PORTABLE: The hard drive USB adapter is designed as portable as possible and tucks easily into the pocket of your laptop bag, you can use it anywhere with no external power required ( The cable will work ONLY with 2.5" SATA drives, 3.5"/5.25" drives are NOT SUPPORTED).
  • SAVE TIME: The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure--just plug and play, An LED light indicates Power and Activity status.
  • WIDE COMPATIBLE: 2.5" External Converter Supports Windows/Mac OS/Linux/Chrome OS laptops, game consoles like Sony PS4/PS3/Xbox One, Smart TV, Router, etc. Hot-swap supported. No request for extra power supply.
Check Stock