Reviews Rv Trailer Brake Controllers

QLZOZB 7 Pin Trailer Plug 7 Way Trailer Plug 7 Way Round RV-Style Trailer Connector, Detachable 7 Pin Trailer Wiring Adapter Plug

  • Wide Application: The 7 pin trailer plug can be connected to the existing trailer connecting line at any time to provide a safe connection between the trailer and the tractor, and can connect the tail lamp, brake lamp, reversing lamp, turn signal lamp, trailer brake and auxiliary power supply.
  • Sealing and Waterproof Design: The 7 way tracker plug is equipped with removable compression nut and rubber washer, which can effectively prevent water and moisture, protect the terminal from bad weather and dangerous road conditions, and increase the service life of the 7 way tracker plug.
  • Removable Structure for Upgrading: 7 way round RV style tracker connector adopts removable hardware design, which is easy to splice. The 7-pin plug can be spliced into the existing trailer wiring at any time, and all terminals are firmly fixed with screws to prevent the trailer wire from pulling out of the connector.
  • High Quality Material: The shell of 7 pin trailer plug is made of high-quality heavy plastic, which is sturdy, wear-resistant and anti-corrosion. High quality brass terminals have high and stable conductivity.
Check Stock

Hopkins 50928 Tow Doctor Trailer End Wire Harness Test Unit

  • Designed so that one person can make sure a trailer has been wired properly and all functions are working.
  • Tests all trailer functions - left turn, brake, tail, backup lights, electric brakes, and auxiliary power.
  • Trailer lights illuminate and LED lights on the tester show function operation.
  • Adapts to 4 wire flat, 6 pole round, or 7 RV blade.
  • For electric brakes, magnets are activated to determine correct operation.
Check Stock

CURT 58964 Custom Towed-Vehicle RV Wiring Harness for Dinghy Towing, Fits Select Jeep Wrangler JL, Gladiator, Black

  • STANDARD FIT. For easy flat-towing of your vehicle behind your RV, this wiring harness allows you to connect the vehicle's taillights to the RV electrical system. It plugs into original equipment connectors on your vehicle and provides a standard 4-flat trailer plug for plugging into the back of the RV..
  • VEHICLE-SPECIFIC. Each dinghy towing wiring harness has vehicle-specific connectors to quickly and securely plug into the vehicle wiring. This RV harness is designed to fit select models of the Jeep Wrangler JL..
  • RELIABLE CONNECTION. This RV tow wiring harness synchronizes your vehicle with your RV, treating the vehicle as a trailer in tow. It allows fast, easy connection of the taillights, brake lights and turn signals..
  • PLUG-AND-PLAY. To completely eliminate cutting and splicing from the installation process, this RV towing vehicle wiring harness is plug-and-play. Just plug the factory connectors into your vehicle's electrical system, and you're ready to hitch up to your RV!.
  • PROTECTED CIRCUITS. The circuits of this dinghy towing wiring harness are equipped wi....
Check Stock

12vMax Electronics 14 Gauge 7 Way Conductor Extension RV Trailer Wire Cable Wiring Insulated - 25 Feet 14/7

  • ✅ 25 foot 7-way copper blade molded into a heavy-duty plug, provides a fast and simplified way for wires connection as well as keeping all your trailer wiring in order..
  • ✅ Replaces the trailer-end plug of any Standard 7-way harness - Commercial grade 7-pin trailer wiring harness.
  • ✅ Weather resistant and corrosion-resistant wire kit.
  • ✅ 7-way connects tail, brake, reverse, turn signals, brakes, and auxiliary power.
  • ✅ 7 lines of 14 Gauge wire in one, ideal for Trailer hitch - Trailer RV Caravan Wire.
Check Stock

CURT 17200 Trailer Anti-Sway Bar Control Kit , Black

  • IMPROVED CONTROL. This trailer sway control kit helps limit your trailer’s lateral movement, using a brake pad type material to restrict and deter trailer sway.
  • VERSATILE. This trailer sway bar is compatible with a wide variety of weight distribution hitches, including almost all CURT weight distribution hitches. It can also be used on most A-frame trailers.
  • HIGHLY ADJUSTABLE. This sway bar hitch easily adjusts for different trailer types and load sizes. It uses a simple hex nut toggle to adjust the level of trailer sway restriction.
  • EASY SETUP. Setting up this trailer sway control unit with your weight distribution hitch is fast and easy. With the included trailer balls mounted in place, the simply on-off handle makes it easy to engage or disengage the sway control whenever needed.
  • COMPLETE KIT. This anti trailer sway bar includes everything needed for installation on your camper or RV as well as your weight distribution hitch or sway tab ball mount #45820.
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on.
  • These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the....
Check Stock

MECMO 7 Pole Round to 7 Way RV Blade Trailer Adapter Connector, Dust-Free High-Impact ABS Plastic, Semi Truck Trailer Adapter for Commercial Vehicle/Pickup Truck/Tractor

  • 【7 Pole Round Pin to 7 RV Blade Adapter】 This 7 Pin Round to 7 RV Blade Adapter designed to transfer your vehicle-side 7-Pin Round Socket (SAE J560 Plug) to a standard 7-Way Blade Plug to be able for towing trailer with 7-way RV-style. 7 Way Round Pin is common found in Semi Truck / Commercial Vehicle / Pickup Truck / Tractor..
  • 【SAE J560 Style Female Connector】The 7 round to 7 blade adapter harness eliminated time and grief to replace/re-wire the Commercial Style Plug on a farm tractor, allowing use of tail, turn, and brake lights on trailers with blade type connector..
  • 【Plug and Play Turn Round Pin to Blade】This SAE J560 trailer connector adapter allows to just plug and go using your existing wiring set up, no more complex splicing wires. Collar with 4 mounting holes lets you mount the socket to your bumper. Built in tabs that lock in using the existing spring loaded cover to secure the plug in place. No more worrying about the plug loosening up during the trip..
  • 【Built To Last】 Sturdy, heavy duty, solid and ready to go. Come with spring-loaded dust cover protect terminal from dust and water. Construct....
Check Stock

Hopkins 47365 7 Blade to 4 Flat Flex Adapter

  • STANDARD FIT. For easy flat-towing of your vehicle behind your RV, this wiring harness allows you to connect the vehicle's taillights to the RV electrical system. It plugs into original equipment connectors and provides a standard 4-flat.
  • VEHICLE-SPECIFIC. This dinghy towing wiring harness fits select model years of the Jeep Wrangler JK.
  • RELIABLE CONNECTION. This RV tow wiring harness synchronizes your vehicle with your RV, treating the vehicle as a trailer in tow. It allows fast, easy connection of the taillights, brake lights and turn signals.
  • PLUG-AND-PLAY. To completely eliminate cutting and splicing from the installation process, this RV towing vehicle wiring harness is plug-and-play. Just plug the factory connectors into your vehicle's electrical system.
  • PROTECTED CIRCUITS. The circuits of this dinghy towing wiring harness are equipped with integrated block diodes to protect your vehicle, isolating the sensitive electronics from the RV signals.
Check Stock

CURT 57667 6-Way Round Vehicle-Side to 7-Way RV Blade Trailer Wiring Adapter , Black

  • VERSATILE DESIGN. This trailer wiring adapter makes it easy to connect a mismatched vehicle socket and trailer plug, adapting your 6-way round connector with taillights in center pin on your vehicle into a standard 7-way RV blade socket.
  • WEATHER-RESISTANT. This trailer wiring harness adapter comes with a spring-loaded dust cover for the 7-pin wiring socket to protect the terminals from water, dirt and corrosion. The wiring harness is also well-protected with the included slit loom sleeve.
  • STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 6-way round and can be used to connect the taillights, brake lights, reverse lights, turn signals, trailer brakes and auxiliary power.
  • NO-SPLICE INSTALL. This 6-pin to 7-pin trailer adapter wiring comes ready to plug into your vehicle or trailer wiring with zero splicing required.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from durable black plastic and die-cast metal.
Check Stock