Reviews Rust Prevention For Trailer Hitches

CURT 13474 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Ford Bronco Sport, Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Ford Bronco Sport.
Check Stock

AUTMATCH Hitch Tightener Anti-Rattle Clamp, Heavy Duty Hitch Stabilizer for 1.25 and 2 inch Trailer Hitches, Rubber Isolator and Anti-Rust Double Coating Protective, Green & Black

  • Super Quality: Heavy-Duty Forged Steel Ensures Eliminate of Wobble, Rattle & Noise, Provide a Quiet and Stable Towing & Hauling Experience.
  • Compatibility: Easily Installs with Class I, II, III or IV (1, 2, 3 or 4) Trailer Hitches and Suitable For 1.25 and 2 Inch Hitch Receivers, Help To Tightening It In Place and Secure.
  • Fitted Suite: High-Strength Anti-Rust U-Bolt with Rubber Isolator and Tightener Plate, 1 Rubber Isolator, 2 Spring Lock Washers, 2 Flat Washers, 4 Locking Nuts, All the Parts of Surface was Covered By Galvanize & Powder Coated.
  • Intended Use: Rich Coated Colors and Stable Locked Down Hitches Stabilizer Fits for Variety Off-road Vehicles, Trailer Hitch Receiver, Trailer Ball Mounts, Bike Racks, Hitch Racks, Etc.
  • Guaranteed: All of Our Products are Backed By Our 100% Satisfaction Guarantee and Please Contact Us for Any Inquiry, We Are Here To Help!!.
Check Stock

CURT 13284 Class 3 Trailer Hitch 2-Inch Receiver Fits Select Mazda CX-9

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4,000 lbs. gross trailer weight, 600 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Mazda CX-9.
Check Stock

CURT 13264 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Toyota Tacoma , Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 900 lbs. tongue weight, 8,000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota Tacoma.
Check Stock

CURT 14374 Class 4 Trailer Hitch, 2-Inch Receiver, Fits Select Dodge, Ram 1500

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ram 1500 and Dodge Ram 1500.
Check Stock

CURT 13293 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select GMC Acadia

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 750 lbs. tongue weight, 6,000 lbs. weight distribution capacity and 750 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the GMC Acadia.
Check Stock

CURT 13439 Class 3 Trailer Hitch 2-Inch Receiver Fits Select Chevrolet Equinox Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4,500 lbs. gross trailer weight, 675 lbs. tongue weight, 4,500 lbs. weight distribution capacity and 675 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Chevy Equinox.
Check Stock

CURT 99307 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Honda Odyssey

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V. Material-Carbon Steel.
Check Stock

CURT 13119 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Honda CR-V , Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Honda CR-V.
Check Stock