Reviews Rtl Sdr Hf Upconverter

Bingfu Dual Band 978MHz 1090MHz 6dBi Magnetic Base SMA Male MCX Antenna for Aviation Dual Band 978MHz 1090MHz ADS-B Receiver RTL SDR Software Defined Radio USB Stick Dongle Tuner Receiver

  • Frequency Range: Dual Band 978MHz 1090MHz.
  • Accessoried Connector Adapter: MCX Plug to SMA Female Connector Adapter.
  • Package List: 1 x Antenna, 1 x Connector Adapter (As the Picture Shown).
  • Compatible with: RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner.
Check Stock

Malachite DSP SDR Radio, 50KHz-200MHz DSP SDR Receiver SDR Shortwave Radio,3.5 Inch Touching IPS Display Screen,Aluminum Alloy,Nice Sound

  • @ @: This Malachite DSP SDR radio is constructed based on the SDR principle, and the function is determined by the loaded software. Configure a built-in UHF, 2 controls, an encoder with buttons and a touch screen..
  • @ @: Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor.
  • @ @: All types of analog modulation: AM, SSB, NFM, WFM，Connect to a computer via USB, which can transmit CAT, IQ and audio. Due to the characteristics of the msi001 chip, the dynamic blocking range is about 85dB.
  • @ @： Frequency：The range of the malachite sdr radio is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version). The powerful stm32h743 with a clock frequency of 480 MHz is applied. Use the fully functional chip msi001.
  • @ @: Built-in receiving module In order to improve the HF reception on the antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design..
Check Stock

NooElec NESDR Smart XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input

  • Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
Check Stock

NESDR SMArTee XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input

  • Premium RTL-SDR bundle includes NESDR SMArTee XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
  • A wide variety of improvements on other designs, including integrated 4.5V 250mA bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
Check Stock

Cable Matters 2-Pack SMA Male to UHF SO-239 Female Cable 1 ft in Black (SMA to UHF SO-239 Cable, SO239 to SMA/UHF to SMA Coaxial RF Cable)

  • Expand your radio equipment with the Cable Matters SMA to UHF Cable.
  • SMA to UHF adapter cable connects to radio equipment and antennas with SMA and SO-239 connectors.
  • SDR antenna cable enables a USB radio dongle to connect to antennas using UHF coax connectors.
  • Compatible with RTL-SDR dongle and adapters.
  • Radio antenna cable adapter enables flexibility and increases your antenna choices.
  • Ham radio antenna adapter cable connects radio equipment to standard UHF antenna adapter.
  • High quality UHF adapter cable features a 50 Ohm impedance rating for optimal performance and supports a frequency range of 0-6GHz.
  • Ideal for use as a radio antenna adapter, radio astronomy adapter, and other uses requiring high-frequency signals.
Check Stock

Xiegu X6100 HF Transceiver, 10W Full Mode SDR Radio Supports Bluetooth with 3.6' LCD Screen

  • Analog – SDR Radio: Software-defined radio (SDR) system uses software for the modulation and demodulation of radio signals. Processing via a computer or other digital devices with software, the X6100 can provide you more info in real-time, complete complex operations and process data faster..
  • 5W Upgrade to 10W High Power: From 5W to max 10W, the Xiegu X6100 is a more powerful RIG than the X5105. In general, a higher wattage allows for greater range. Working with the XPA125B power amplifier, the X6100 can meet your long-rang talking requirement..
  • 3.6″ LCD Screen – 4in Color Screen: The Xiegu X6100 HF transceiver comes with a 4-inch large color screen with 800*400 high resolution, helping you see all the important information at a glance..
  • Wireless Operation: In addition to traditional connecting ports to connect with extended devices , the Xiegu X6100 also supports modern connection methods like mouse and keyboard control via Bluetooth..
  • Built-in High-stability TCXO Internal Clock Source.
Check Stock

Blox Racing BXIM-00213-GK Replacement Gasket

  • Use the RTL2832U + R820T2 chipset with stable working performance..
  • 50 ohm input impedance,independent antenna input for shortwave and VHF.Powered by universal USB..
  • HF short-wave Q-branch direct sampling,8-bit ADC provides ~50 dB dynamic range..
  • Support receiving mode AM, NFM, FM, DSB, USB, LSB and CW..
  • Wide range of frequency band,the turn receiver covers VHF and UHF bands of 24-1766MHz..
Check Stock

Nooelec NESDR Smart v4 Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.

  • Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6).
  • An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).
Check Stock

Cable Matters 2-Pack SMA Male to F-Type Female Coax Cable Adapter Gender Changer Coaxial Cable Adapter for USB SDR Dongle Two-Way Radio Ham Radio Antenna and More

  • Convert between standards and connector gender with the 2-pack of F-Type Female to SMA Male RF adapters.
  • Coax adapter F-Type to SMA converts a connector, antenna, or cable connector between coax cable connector types.
  • F-Type and SMA connectors are commonly found on two-way radios, software defined radio dongles, antennas, and other RF connectivity products.
  • SDR antenna adapter enables a USB radio dongle to connect to antennas using standard F-type coax connectors.
  • Compatible with RTL-SDR dongle and adapters.
  • Radio antenna adapter enables flexibility and increases your antenna choices.
  • Ham radio antenna adapter connects radio equipment to standard coax antenna adapter.
  • High quality coaxial adapter features a 50 Ohm impedance rating for optimal performance and supports a frequency range of 0-6GHz, ideal for use as a radio antenna adapter, radio astronomy adapter, and other uses requiring high-frequency signals.
Check Stock