Reviews Router Table Insert Plate

Router Lift, Metal Router Lift System Kit for Router Table Saw Insert Base Plate, 4 Jaw Clamping, with Strong Grip

  • DIY ROUTER LIFT TABLE: This lifter base is suitable for making your own router worktable for high precise woodworking, easy to install and operate. NOTE: Only include lift part, not included insert plate! The other parts pictured are for display purposes only and need to be purchased separately (link on the details page below).
  • FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
  • WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
  • EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
  • EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..
Check Stock

Cable Matters 2-Pack 2-Port TV Cable Wall Plate (Coax Wall Plate) in White

  • Coax wall plate provides a tidy way to connect a CATV box.
  • RG6 wall plate in white can be mounted with a standard-sized single gang low voltage mounting bracket.
  • 1 gang coax coupler wall plate provides pass-thru of video and data from an RG6 coaxial cable.
  • Replace a broken outlet or add an expansion location in the bedroom with this coaxial cable wall plate.
  • Coax wall jack has a standard F connector used by cable companies to connect a modem, router or CATV box for video and internet service.
  • Antenna wall plate connects a coax cable from an antenna with an F pin connector cable.
  • Cost effective 2-pack of dual coax faceplates organizes cables behind the wall instead of running them across the floor.
  • Install close to your router for a professional-looking installation.
  • Two-piece cable outlet cover with included faceplate and coax wall plate insert makes connecting the cables easier.
  • Simple installation ofcoaxial wall plate insert with the included mounting screws.
Check Stock

JessEm 02314 Rout-R-Lift II Router Lift for Rigid Brand Router Motor 29302

  • The JessEm 02314 Rout-R-Lift II router lift is compatible with Rigid brand router motor 29302..
  • Features a 9-1/4" x 11-3/4" Phenolic insert plate..
  • Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts..
  • Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench..
  • Additional insert rings available separately..
Check Stock

O SKOOL Quick Convertible and Foldable Benchtop Trim Router Table with Insert Plate Kit

  • Includes: (1) Router Table with foldable table legs, (1) Fence with MDF sub-faces, (1) Insert Plate, (1) Bit guard, (1) Dust port.
  • The table legs can be folded up quickly, and there is a handle next to the table, which can be easily lifted and easy to transport and storage. Small....
  • X' frame stand which when open is very stable. The table base has a Locking Knob that can be adjusted in 3 heights(13.6"、14.8" & 15.6") for ease of....
  • Compact and portable, yet full-featured, for cutting, leveling, jointing, planing routing, nd shaping small to mid-sized stock, the table is ideal for....
  • Bit guard protects fingers by shielding the cutter area. 2-1/2"-inch Dust Collection port fits your wet/dry vacuum and keeps work area clean. Standard....
Check Stock

JessEm 02311 Rout-R-Lift II Router Lift for Use With Makita 1101 Router Motors

  • JessEm's 02311 Rout-R-Lift II router lift is compatible with the Makita 1011 router motor..
  • Features a 9-1/4" x 11-3/4" Phenolic insert plate..
  • Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts..
  • Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2"., 2-1/2", and 1-3/8"), and 1 insert wrench..
  • Additional insert rings available separately..
Check Stock

O'SKOOL 6-1/2\ Router Acrylic Universal Base Plate Fits Router Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

  • Adds visibility by being clear acrylic,quick and easy to mount..
  • Diameter : 6-1/2-Inch.with centering pin and assorted screw sizes to accommodate template guide variations..
  • Prepare your router and the existing base plate and any related hardware. In the fastener package provided, locate the machine screws that match the threads in your router..
  • On the chart on this page,find the model of your router and the corresponding letter that represents the mounting hole pattern on the base plate drawing.Locate the hole pattern on the base plate and mark with wax crayon or felt tip marker..
  • Ensure your router has a 1/4" collet installed and place the universal base onto the router lining up the marked mounting holes.Install the choosen machine screws but do not tighten. Insert the enclosed alignment pin into the 1/4" collet until it almost contacts the guide bushing. Tighten the collet lightly onto the pin. Carefully adjust the router depth so the pin makes contact with the alignment pin.Tighten the machine screws.Note:if the machine screws supplied bottom into the router mounting.
Check Stock

Bosch RA1171/RA1181 Feather Board # 2610927685

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

Bosch Cabinet Style Router Table RA1171 , Blue

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock