3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack
- Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
- Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
- Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
- Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
- Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check StockBosch Benchtop Router Table RA1181
- Benchtop router table design – Features a large aluminum top for extended work area, durability and precision.
- Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment.
- Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility.
- Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean.
- Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection.
- Accessory slot – Accepts feather boards and 3/4 inch optional accessories such as a miter gauge.
- Storage pocket – Allows storage of router accessories.
- Cord-wrap storage – Stores 6 foot power cord.
Check Stock
Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack
- Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
- Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
- Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
- Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
- Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check StockSawStop RT-DCB Downdraft Dust Collection Box for Router Lift
- Compatible with all SawStop Router tablesDescriptionEngineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangable panels for optimum dust port and Vent placement. Plug the 2.25" dust hose from the router fence directly into the dust box's branch inlet, and let the 4" port deliver above and below Table dust from the same port..
Check StockFence Backer Boards By Peachtree Woodworking - PW1093
- MDF Fence makes great fences for router table & other too.
- Make you own brackets or use our aluminum fence blank (Sold Separately).
- 2- 16" x 4" MDF Fence Plates with Mini-T-Track installed front & back.
- 4 Knobs & 4 ea 1/4" hex head bolts for installation.
Check Stock
Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws
- What is a featherboard you might ask? Is it something I need for my workshop? Well the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most work shops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence your running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through..
- The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
- Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in....
Check Stock
O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate
- Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
- Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
- Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
- Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
- After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock
O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit
- Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
- Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
- Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
- Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
- After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check StockGRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws
- Auto-retracting heel technology hooks the tail-end of your board.
- Proprietary Green GRR-RIP for extreme hold.
- 90-degree flip guide for vertical footing on band saws and router tables.
- Ergonomic handle exerts directional pressure against the fence.
- Optional mounts for Deflector/Connector shield plate for additional protection against chip debris.
- 90-degree flipguide for vertical footing on bandsaws and router tables.
- Made in the USA. A true MICROJIG Innovation..
Check Stock 
