Reviews Round Boring Bar

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).

【Swivel Seat】Wooden seat 360 degree smooth rotate. The flexible rotation changes all the boring life..
【Wooden Tops】The wooden tops making the swivel stools applicable all year round..
【Large Seat Area】14.3"x 14.1" seat area is larger than most of the barstools. This swivel bar stool is also comfortable for large size person..
【Ergonomic Backrest】 The 12 inch height ergonomic backrest fits the curves of the human body which is quite comfortable for sitting and safty for childen as well..
【Scratch-proof pad】Rubber feet under the bar stool legs keep floors from damaging and scratching..

【Swivel Seat】Wooden seat 360 degree smooth rotate. The flexible rotation changes all the boring life..
【Wooden Tops】The wooden tops making the swivel stools applicable all year round..
【Large Seat Area】14.3"x 14.1" seat area is larger than most of the barstools. This swivel bar stool is also comfortable for large size person..
【Ergonomic Backrest】 The 12 inch height ergonomic backrest fits the curves of the human body which is quite comfortable for sitting and safty for childen as well..
【Scratch-proof pad】Rubber feet under the bar stool legs keep floors from damaging and scratching..

【Swivel Seat】Wooden seat 360 degree smooth rotate. The flexible rotation changes all the boring life..
【Wooden Tops】The wooden tops making the swivel stools applicable all year round..
【Large Seat Area】14.3"x 14.1" seat area is larger than most of the barstools. This swivel bar stool is also comfortable for large size person..
【Ergonomic Backrest】 The 12 inch height ergonomic backrest fits the curves of the human body which is quite comfortable for sitting and safty for childen as well..
【Scratch-proof pad】Rubber feet under the bar stool legs keep floors from damaging and scratching..

OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.

9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").

Oregon 73DPX100U 3/8" Pitch .058" Gauge Saw Chain - 100' Reel.
Blued cutters provide superior corrosion resistance and improved strength which makes the DPX chain excellent for dusty or dirty conditions.
"X" grind - Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
Round-cornered "semi-chisel" cutters work fast and typically are more tolerant of sharpening errors than most cutter types.
Recommended Bar Lengths: 16 to 36 in. (40 - 90cm) Recommended Saw Sizes: 50 to 100cc.

3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
It is not necessary to remove tool from chuck or tool post.
Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.

Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manu....