Reviews Roof Cladding Forming Machine

Mortairvent 202 6mm (200 sq. ft.)

  • 95% open design creates a continuous capillary break and channel for moisture to drain, accelerating drying of the exterior cladding..
  • Simple and quick to install. Easier and more cost effective than traditional furring strip methods..
Check Stock

Radiant Solutions Company Heat Cable for Pipe Freeze Protection, 24 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

  • ★H&G lifestyles heat tape（120 volt, 8 watts/ft. self-regulating 158 °F=70℃） Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • ★Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles. Suitable for all roof and gutter configurations..
  • ★Heated wire for roof is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables.
  • no maintenance required, Self-Regulating roof snow melt cable WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables..
  • ★Tough Modified Polyolefin as inner insulation and weather resistant TPE (high-low temperature) as out jacket. 100% screen rate and tinned copper core. More safe and more healthy.
  • Self-regulating temperature design is energy-saving and safer, If you are not completely satisfied with H&G lifestyles heating cable, please don't hesitate to contact us.
Check Stock

VEVOR Self-Regulating Pipe Heating Cable, 80-feet 5W/ft Heat Tape for Pipes, Roof Snow Melting De-icing, Gutter and Pipe Freeze Protection, 120V

  • Beat the Winter: Treat your pipes and roof right and stand up to the harshest winters. Our self-regulating pipe heating cable is designed to prevent ice dams from forming on roofs, downspouts, and in gutters. Protect your roof from damage and leaks. Keep the water flowing in the gutters and downspouts continuously..
  • CSA Certification Approved: Our roof heating cable has 5W/ft and has rapid heating. It only needs 5 minutes to rise to 85℉ and keeps your pipes protected from -4℉ cold temperatures! You will never have an issue when everyone else has frozen pipes! Our CSA-approved heating cable with IP68 waterproof rate assures 3 years' worth of use..
  • 80 ft for More Protection: The 80 ft roof heat tape has a 6 ft power cord, which allows it to work at long distances. The 1/2-inch width heat tape for water pipes has a large contact area, achieving a fast speed for melting ice or snow. Defrost and relax this winter. We have got you covered..
  • Self-regulating Technology: The 120 V heat tape for roof and gutter automatically adjust heat output to ambient temperatures, reducing energy costs effectively. No need to worry about....
Check Stock

VEVOR Self-Regulating Pipe Heating Cable, 140-feet 5W/ft Heat Tape for Pipes, Roof Snow Melting De-icing, Gutter and Pipe Freeze Protection, 120V

  • Beat the Winter: Treat your pipes and roof right and stand up to the harshest winters. Our self-regulating pipe heating cable is designed to prevent ice dams from forming on roofs, downspouts, and in gutters. Protect your roof from damage and leaks. Keep the water flowing in the gutters and downspouts continuously..
  • CSA Certification Approved: Our roof heating cable has 5W/ft and has rapid heating. It only needs 5 minutes to rise to 85℉ and keeps your pipes protected from -4℉ cold temperatures! You will never have an issue when everyone else has frozen pipes! Our CSA-approved heating cable with IP68 waterproof rate assures 3 years' worth of use..
  • 140 ft for More Protection: The 140 ft roof heat tape has a 6 ft power cord, which allows it to work at long distances. The 1/2-inch width heat tape for water pipes has a large contact area, achieving a fast speed for melting ice or snow. Defrost and relax this winter. We have got you covered..
  • Self-regulating Technology: The 120 V heat tape for roof and gutter automatically adjust heat output to ambient temperatures, reducing energy costs effectively. No need to worry abo....
Check Stock

Turtle Wax T-125 Premium Grade Trim Restorer - 10 oz.

  • Use on plastic trim, body cladding, window seals, molding, plastic wiper arms, door handles, tonneau covers and more.
  • Instantly restores dull, faded trim and body cladding to original appearance and protects against future fading.
  • Provides an invisible protective barrier that prevents staining caused by contact with waxes and polishes.
  • Can be used on any color plastic trimcolor plastic trim.
  • Long lasting formula will last up to 3 months.
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs..
  • Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with ....
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dx Yellow Zip-Cord PVC ofnr lc-lc

  • Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

ECO-WORTHY Solar Powered Attic Fan Solar Venting Stainless Steel Solar Roof Fan Vent

  • ...pre-drilled mounting holes, self-tapping screws for easy installation. It is a ready-to-use play solar fan, just take it out of the box, no extra wiring involved..
  • 【 Well-Made Material 】- The material of this solar attic ventilator is stainless steel which provides longevity to the fan and prevents any rust from forming. It is the perfect solar powered exhaust fan for sheds, roof, attic, RV, boats, cabin, etc..
  • 【 Friendly Service 】- This solar ventilation fan provides a 30-day quality guarantee, and if there is any quality problem within 30 days, a free return service is provided. Since some parts of the ventilating fan are spliced with adhesive, they will fall off. If you encounter this situation, please contact us as soon as possible, and we will reissue you with a better adhesive..
Check Stock

faruijie Typodont Teeth - 28pcs for Typodont Dental Teeth Model Removable Teeth use for Practice and Teaching…

  • Dental Hard Splint mainly used for manufacturing of dental retainers, and need to use with vacuum forming machine to make a oral cavity shape negative mold..
  • Advantages: No bubbles when molding, with excellent wear resistance and stability..
  • Usage: Tear off the protective films on both sides before use.Use vacuum forming machine to heat for about 2-3 minutes to make it soft then Vacuum and Molding..
  • Notice: please store it in a cool place. Once it is open, use it as soon as possible to prevent forming sheets getting damp..
Check Stock