Reviews Robotic Clamp Tool

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

Goldblatt 2 Pack Panel Carrier, Plywood Lifting Tool, Drywall Carrying Tool - Plywood Carriers Tool for Wood, Synthetic Cement Board - Clamping Thickness up to 3/4 inch

  • ... table tops, metal panels and other boards. The self-adjusting fixture can accommodate panel thicknesses from 0 to 1 inch.
  • 【Handle with one hand】: This panel/plywood lifter has a durable, impact-resistant ABS handle, allowing a person to easily lift and carry the entire length of material with only one hand. The clamp can clamp up to two plates or panels at a time and can withstand a load of up to 200 pounds. Use this convenient sheet and panel mover to complete work faster.
  • 【Solid metal structure]】: This gypsum board fixture is durable and adopts a heavy-duty solid metal structure. The clamp and the handle arm are machined from aviation-grade aluminum, while the joints are made of solid steel bars. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality structure ensures that the tool can withstand violent lifetime use.
  • 【Self-adjusting clamp】: Autoly's device has a universal but simple design, allowing clamps to clamp various types of panels and sheet goods. Once you start lifting, the clamp will automatically adjust to the thickness of the panel or sheet. This innovative tool can fix up to two panels or sheets at the same time..
  • 【Easily carry on back】: It may be very difficult to carry slate, plywood and bo....
Check Stock

Enkelbruke Pneumatic Clamp, GH-12130 Professional Cylinder Pneumatic Hold Down Clamp, 230kg Clamping Force

  • FUNCTIONS -- The hold down clamp can not only reduce the intensity of labor of workers, but also help ensure the machining accuracy of the workpiece..
  • ESSENTIAL TOOL -- The toggle clamp is a essential clamping tool that can help achieve automatic control..
  • HIGH EFFICIENCY -- The cylinder pneumatic clamp can largely shorten the test time and improve the production efficiency..
  • 230kg CLAMPING FORCE -- With a total length of 300mm and a maximum clamping force of 230 kg, the clamp helps to ensure the machining accuracy of the workpiece.
  • APPLICATION -- This pneumatic lever clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages, and molds..
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

7 in Quick Release Workbench Vise

  • Rockler F-Style Clamp Rack: A compact solution to a sprawling problem! This wood working clamp rack from Rockler herds your F-clamps together & mounts them firmly to the wall or to the Pack-Rack (sold separately), so your clamps are where you need them, when you need them..
  • Perfect For Storage: The customary way of storing F style clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
  • Workshop Organization: With the Rockler F-bar clamp rack, you can say goodbye to untangling clamps! This garage tool clamp rack measures .30” wide..
  • Secure Hold: These racks are heavy-duty and hold F-clamps for woodworking securely. The clamps will not fall off even if bumped. The installation of this rack tool holder for the garage wall is pretty easy, you just require lag bolts..
  • High Quality:This woodworking clamp rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 30'' wide. The footprint is very compact, saving you both wall space and floor space..
Check Stock

Acrux7 12 Pack Toggle Clamp Vertical Quick Release Heavy Duty 200 Lbs Holding Capacity Antislip Red 102-B Hand Tool Hold Down Clamps for Woodworking

  • 12PCS Heavy Duty Toggle Clamp: 102-B hand tool toggle clamp, non-slip red vertical clamp quick-release tool..
  • 200lbs Holding Capacity: Vertical toggle clamp can hold up to 200 lbs, with adjustable rubber pressure tips..
  • Size : 3x1.1x4 inch (L*W*H), screw: M4* 48, weight: 115g, Handle opens angle: 65°, opening angle rod: 90°..
  • Cold Rolled Carbon Steel: Galvanized coating, corrosion-resistance, and red vinyl grip for easy identification..
  • Wide Applications: A rock-solid grip to install on tool fixtures, or movable bases is ideal for track system, fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK

  • Includes: (two) piece 24-inch parallel jaw Clamp set.
  • Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier.
  • Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool.
  • 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement.
  • Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool.
Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

  • 【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
  • 【Holding Capacity】27Kg / 60Lbs, solid grip.
  • 【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • 【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock