Reviews Ring Joint Gasket Spiral

Sterling Seal 90002500316GR150X6 316L Stainless Steel spiral Wound Gasket with Flexible Graphite Filler, for 2-1/2\ Pipe, Pressure Class 150# (QTY: 6) , 2.5 , green Band with Grey Stripes (Pack of 6)

  • SSS style 913, 316L stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913 gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal SSI9000.500304GR300x12 Spiral Wound Gasket with Flexible Filler for 1/2\ Pipe, Pressure Class 300#, 0.75\ ID, 304 Stainless Steel Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check Stock

Sterling Seal SSI90006304GR150x12 Spiral Wound Gasket with Flexible Filler for 6\ Pipe, Pressure Class 150#, 7.187\ ID, 8.75\ OD, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints..
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow..
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance..
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed..
Check Stock

Bitray SA8T/K Rod End Bearing 8mm Inside Dia Male Thread Right Hand Self Lubricating Bearing - 4PCS

  • ◎【MATERIAL】 The rod end body is carbon steel, the galvanized environmentally friendly white zinc gasket material is copper inner ring (copper ball) material is bearing steel, quenched, the spherical surface is hard chrome plated, and there are left and right thread..
  • ◎【DIMENSION】Outside Diameter: 24mm.
  • ◎【PACKAGE INCLUDEDS】4 pcs x Rod End Bearing.
  • ◎【WIDELY APPLICATION】Widely used in machinery, power tools,automation equipment, CNC equipment, and so on..
  • ◎【CAUTION WHEN USING】 Where the press is missing or unavailable, the end sleeve joint bearing can be installed with an assembly sleeve and a hammer. The hammering force should be evenly transmitted to the entire circumference of the end surface of the end rod joint bearing ring, so the hammered end surface of the assembly sleeve should be made spherical..
Check Stock

Ring Size Adjuster for Loose Rings Invisible Ring Guard Clip Transparent Silicone Sizer Tightener Resizer Fit Almost Any Ring 4 Sizes Transparent-4Pcs

  • ★HIGH QUALITY: The ring size adjuster is made of elastic transparent TPU material, comfortable, durable, soft and invisible, so you don't have to....
  • ★ 4 sizes: 2mm 3mm 4mm 5mm wide, 10cm long, 1 pieces for each size, 4 pieces in total, fits almost any ring in a 4-pack..
  • ★ EASY CLEAN: The ring sizer can be easily wiped to remove dirt, oil and dust without discoloration over time..
  • ★Easy to use: The ring adjuster is 10cm/4 inches long, you can freely cut it according to the ring size. The perfect solution for finger joint....
  • ★ GREAT SOLUTION: The innovative spiral design provides a long-lasting fit for most rings and easily wraps around the back of any ring band. It fits....
Check Stock

Sundown Audio SA-15 Classic D2 15 750 Watts Dual 2-Ohm SA Series Subwoofer

  • Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement: 0.17ft^3.
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz).
  • 19.0mm X‐Max by 70% BL method one‐way (38.0mm peak to peak) | Thick black anodized aluminum voice coil formers for maximum strength and heat....
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....
Check Stock

228 Buna-N O-Ring, 50A Durometer, Round, Black, 2-1/4\ ID, 2-1/2\ OD, 1/8\ Width (Pack of 10)

  • O-RING ASSORTMENT KIT: NEIKO introduces our Rubber O-Ring Assortment Set. Each O-ring acts as a joint gasket to seal and protect water lines in any oil line, faucet, sink, filter, toilet, or other machinery..
  • VERSATILE & RELIABLE: Thanks to the NBR construction, these O-rings are resistant to water, UV, lubricants, hydraulic fluids, gasoline, alkalis, and grease. Each O-ring creates a long-lasting seal system that protects your devices from leaks..
  • DURABLE O-RING KIT: Each O-ring in this 270-piece set is built for long-lasting use with static and dynamic motion cylinder fittings. The rings are made of commercial-grade nitrile butadiene rubber for liquid resistance..
  • COMPACT SIZE: Our O-ring kit comes organized in a case by ring size and shape. Carry this seal tool set with you wherever you’ve got a leak that needs extra sealing protection, and be ready to repair against water leaks and other liquids..
  • WHAT’S INCLUDED: This rubber O-ring set includes 18 common small and large SAE and metric sizes for a range of home, hydraulic, industrial, and pneumatic applications. A sturdy plastic case is included..
Check Stock

E-15 V.3 D2 - Sundown Audio 15 500W RMS Dual 2-Ohm EV.3 Series Subwoofer

  • RE (ohms): 7.75 | FS (Hz): 36.95 | Vas (L): 52.35 | Qes: 0.85 | Qms: 6.63 | Qts: 0.75 | Le (mH): 4.98 | BL (NA): 25.87 | Mms (Grams): 315.
  • Cms (uM/N): 58.8 | Sens (1w/1m): 86.68 | Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement:....
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz) | 19.0mm....
  • Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation | 4‐layer copper high temperature voice coil windings....
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....
Check Stock

Pair Sundown Audio SA-15 Classic D4 15 1500 Watts Dual 4-Ohm SA Series Subwoofers Pair

  • RE (ohms): 7.75 | FS (Hz): 36.95 | Vas (L): 52.35 | Qes: 0.85 | Qms: 6.63 | Qts: 0.75 | Le (mH): 4.98 | BL (NA): 25.87 | Mms (Grams): 315.
  • Cms (uM/N): 58.8 | Sens (1w/1m): 86.68 | Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement:....
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz) | 19.0mm....
  • Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation | 4‐layer copper high temperature voice coil windings....
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....
Check Stock