Reviews Rf id Card

Bestom Hard Plastic ID Card Holders for Badges with Permanent Locking Badge Card Holder – Heavy Duty Vertical Style Secure Dual Sided Clear ID Case Holder for One or Two ID Cards – Pack of 50

  • 【USE ON BOTH SIDES】: This Plastic Name Badge Holder Size WxL 2.4 x 4.2 inch, Insert Card Size WxL 54x86MM, Top Load. ID Badge Holder easily fits two standard 30mil Id Badges or One Proximity / Prox Card, Great for Single Thick Cards, Contactless Prox Cards or even a Medicare Card..
  • 【STRONG PROTECTION】: Hard Plastic Card Holder made of durable polycarbonate (PC) material, Clear ID Badge Holder can resist UV, dust and water to keep your important paper badges or cards dry, clean and secure.
  • effectively protect your card from bending, aging or damage..
  • 【ULTRA-CLEAR WINDOW】: Heavy Duty Badge Holder having both sides are ultra-clear, when you use two cards at the same time, both sides can perfectly display your photo ID card. The use of digital cards is completely unobstructed and can be scanned by RFID and Prox card scanners without removing the card from Badge Card Holder..
  • 【PERMANENT LOCKING】: This ID Protector has upgraded the locking mechanism, once this ID Case used, it cannot be easily disassembled unless it is broken by external force to remove the card. It is recommended to use Clear Card Holder with cards that do not need to be taken out frequently and prevent loss..
  • 【MULTI-SCENE USE】: This clear Vertical ID Badge Holder is ....
Check Stock

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

  • The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, with pin header. The module can be directly loaded into the various reader molds..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • Module Interface: SPI， Data transfer rate: Maximum 10Mbit/s..
  • Power Voltage : 3.3V,Operating frequency: 13.56MHz..
Check Stock

Readerest Magnetic Eyeglass Holder, ID Badge Holder, Shark Tank, Made in USA (Stainless Steel)

  • Package Including: 3 badge lanyards, 6 pieces waterproof ID holders and 2 pieces name badge clips.
  • A large number to meet your daily needs and replacement..
  • High Material: ID necklace holder are made of quality stainless steel ,ID holders are made PVC to ensure durability and long-term use..
  • Easy to use: The length of necklace is 34.6 inches/ 88 cm, the retractable badge reel is 13.8 inches/ 35 cm, comfort and convenient for you to wear..
  • Great Gifts: Retractable ID badge reel lanyard is suitable and practical for anyone who uses an ID card, you can give it to your mom, girlfriends, friends, colleagues and so on..
  • Wide applications: It is easy to scan and ideal for students, office workers, nurses, doctors and more for ID card, cruise card, access card, cash, keys, business card and other small items that you don't want to hold in hand..
Check Stock

Name Tags Blue Lanyards/Badge Holder Pairs Woven Round Lanyard & Horizontal Sealable Waterproof Clear Plastic ID Card Lanyards with id Holder Name Badges (Blue, 50 Pack)

  • Fits 1-3 pcs of credit card or driver's license sized cards..
  • PERFECT SIZE FOR AVERY 5390 / 05390 & THE STRONGEST AND THICKEST ID HOLDER - Card Fit Size (Inside) of HORIZONTAL ID Holder is 2.4"(height) x 3.75"(length), Compatible with Avery Name Badge Inserts 5390 / 05390 (2-1/4 x 3-1/2 Inches). Comfortably fit 3 credit-cards or driver's license. The thickness of our ID holders is 0.30mm. It is strongest and thickest in Amazon..
  • WATERPROOF with SEAL-LOCK to KEEP CONTENTS SECURE and DRY .The ID holder pouch is handy to hold other small articles, like hotel room card, key, small change and entry passes..
  • PERFECT SIZE FOR AVERY 5390 / 05390 & THE STRONGEST AND THICKEST ID HOLDER - Card Fit Size (Inside) of HORIZONTAL ID Holder is 2.4"(height) x 3.75"(length), Compatible with Avery Name Badge Inserts 5390 / 05390 (2-1/4 x 3-1/2 Inches). Comfortably fit 3 credit-cards or driver's license. The thickness of our ID holders is 0.30mm..
  • WATERPROOF, DURABLE, REUSABLE, RESEALABLE: ID & Name card holder pouch is made of flexible, clear, waterproof, and tear resistant. Keep your Name tags, RFID badge, bus card, passes, hotel keys, your credit cards and employee badges SAFE, SECURE and DRY. Unlike other ID holders, our zip lock makes sure to keep everything dry and kee....
Check Stock

MINIMOD 2 Vecoax | HDMI to Coax Modulator to distribute Your hdmi Video Sources to All TVs as HD Channels Over existing tv Coax Cables

  • HDMI RF Modulator - HDMI to coax / RCA CVBS composite adapter will hook up your streaming media players like Apple TV, Amazon Fire Stick , Fire TV,....
  • RF Modulator RCA Coax - Convert HDMI digital signals into RCA CVBS & VHF TV ( RF ) analog signals at the same time, then you can connect a TV that....
  • HDMI to Coax Adapter - One F type female coaxial input for connection of antenna , hd tv tuner , satellite set-top / cable box ,and a separate RF coax....
  • RF Modulator for TV - HDMI in F Type Female ANT ( antenna ) out with coaxial RF analog signals.
  • No drivers / adapters needed, plug and play , easily &....
  • HDMI to RCA - Multifunctional VHF TV demodulator also is a hdmi to AV converter for old TV , monitor , projector , vhs player or capture card devices....
Check Stock

ELV Badge Holder with Zipper and Lanyard, PU Leather ID Badge Card Holder Wallet with 5 Card Slots, RFID Blocking Pocket, Adjustable Detachable Neck Lanyard with Keychain and Pen Holder

  • A BADGE HOLDER THAT MAKES LIFE SIMPLER - As technology improves, cash is being replaced by credit and debit cards. ID cards such as school IDs, office IDs, driver's license and other forms of identification are needed for security reasons. Our badge holder wallet with a detachable, adjustable neck lanyard (20 inches), helps keep all these important ID cards in an efficiently designed PU leather wallet to make your life easier..
  • BADGE HOLDER ID CARD WALLET STRUCTURE - With a total of 5 card slots, the front of this badge holder has a clear easy to scan ID card window and an open card slot with a pull tab for easy access. On the side of this ID card wallet is a RFID blocker pocket with a zipper. The opposite side has a built-in pen holder. The back of the card holder wallet has 3 debit and credit card sized slots protected by a sturdy leather covering which snaps tightly shut to prevent cards from falling out..
  • PREMIUM QUALITY WITH EFFICIENCY - This ID holder is made with top quality PU leather which has reinforced stitching to provide durability. The RFID blocking pocket is a great place to keep cash, a USB, different keys etc... The adjustable, detachable neck lanyard comes with a carabiner, key ring and has a safety clasp breakaway feature. The n....
Check Stock

Bestom 3 Pack Frosted Vertical Hard Plastic ID Card Holder. Rigid Plastic ID Card Protector Case W/ Thumb Notch and Slot & Chain Holes (3)

  • 【Ease of Access with ID Card Holder】: Our ID Badge Holders are made keeping in mind the ease of access, Badge Protector comes with a thumb slot which makes sliding in and out a card much easier at slide or ID checkpoint. Our Plastic Badge Holder is incredible for anybody who needs to access multiple cards in a day while Heavy Duty Badge Holder ensures that your identity cards are perfectly protected and fully functional everyday.
  • 【Durable Plastic Card Holder】: Our ID Holders for Badges having slim and sleek design make quality its first priority as well, Clear Badge Holder is made with high-quality ABS plastic which is really durable and rigid, it prevents the card from any sort of deforming i.e. prevents from getting cracked or bending out of shape.
  • our Plastic Name Badge Holder is incredibly lightweight and remain in a good condition for a long period of time without losing its clarity.
  • 【Multiple Use ID protector】: This Plastic ID Badge Holder is suitable for office key cards, smart PIV, CAC, not only this, but fits all standard 8030 proxy cards (driver license/credit card size) as well as anything within the range of (L*W) 3.370"x 2.125" (86mmx54mm).
  • this Badge Card Holder is good for hospital staff, office staff, students, employee....
Check Stock

Stitch PU Leather Badge Holder with Stitch Lanyard ID Credit Card Holder Wallet(PULY Stitch)

  • 【Structure】- 1 Clear ID window + 1 open card slot with PULL TAB.
  • 1 RFID BLOCKED cash slot with zipper pocket. ID window with clear cover features visibility and protection, makes it easy to scan ID Cards. Can hold bills, credit cards, photo, ID card, business card, etc..
  • 【Measurement】- ID Credit Wallet Size: 7.6*11.8cm(2.99*4.64inch).
  • 【Environment-Friendly Materials】- Our Stitch Card Wallets are made of high quality PU leather,soft and durable,eco-friendly. The lanyard is made of a soft silk material that won't irritate your skin..
  • 【Perfect Gift】- This versatile and stylish card wallet is a great present. It's a perfect gift for friends. It can be perfectly used for business women, office employees, students, teachers, doctors, nurses, waiters, etc...
  • 【Service Guarantees】- 90-day refund guarantee or exchange. If you are not satisfied with our Stitch Card Wallet for any reason, please contact us.You are eligible for a full, unconditional refund..
Check Stock

Bestom 10 Pack Frosted Clear Vertical Hard Plastic ID Card Holder. Rigid Plastic ID Card Protector Case W/Thumb Notch and Slot & Chain Holes (10)

  • 【Ease of Access with ID Card Holder】: Our ID Badge Holders are made keeping in mind the ease of access, Badge Protector comes with a thumb slot which makes sliding in and out a card much easier at slide or ID checkpoint. Our Plastic Badge Holder is incredible for anybody who needs to access multiple cards in a day while Heavy Duty Badge Holder ensures that your identity cards are perfectly protected and fully functional everyday.
  • 【Durable Plastic Card Holder】: Our ID Holders for Badges having slim and sleek design make quality its first priority as well, Clear Badge Holder is made with high-quality ABS plastic which is really durable and rigid, it prevents the card from any sort of deforming i.e. prevents from getting cracked or bending out of shape.
  • our Plastic Name Badge Holder is incredibly lightweight and remain in a good condition for a long period of time without losing its clarity.
  • 【Multiple Use ID protector】: This Plastic ID Badge Holder is suitable for office key cards, smart PIV, CAC, not only this, but fits all standard 8030 proxy cards (driver license/credit card size) as well as anything within the range of (L*W) 3.370"x 2.125"....
Check Stock